README.TXT Driver File Contents (M162A-1.ZIP)

                          Additional Information

                       Multimedia Pro 16IIAO  v1.00
                     
   This file contains additional information and changes about the
   various software that was not available at printing time.


   CD-ROM Drive Support
   ====================

   The bundled CD-ROM device driver supports only on the following drives:

   Driver           CD-ROM Model
   ------           ------------
   SGIDECD.SYS -   Aztech CDA268-03I / CDA268-03ISE / CDA468-01I /CDA668-01I

   
   Using Digital (.WAV) Audio with DOS 6.x's DoubleSpace*
   ======================================================

   The DoubleSpace utility included with DOS 6.x can cause problems
   if you attempt to play or record "high data rate" (i.e.: stereo/
   44.1kHz/16-bit) digital audio to or from a compressed disk.

   Therefore, if you anticipate that you will be playing or recording
   a lot of stereo/44.1kHz/16-bit digital audio, you should set up a
   non-compressed drive partition and configure the audio application
   to use this drive as their Work and Temp directories. 

   For information on setting up a non-compressed partition for your
   hard drive, refer to your DOS 6.x Users Guide. 

   The same procedure should be followed if you are using Stacker, a
   third-party disk compression utility.


   Notes About Using EMM386.EXE
   ============================

   When running applications with EMM386.EXE installed, the following
   error message may appear:

      "EMM386 DMA buffer is too small"

   You can overcome this problem in two ways:

      - remove the EMM386.EXE entry from the CONFIG.SYS file

      OR

      - add the following parameter to the EMM386.EXE entry in the
        CONFIG.SYS file:

           D=64

           where D specifies how many kilobytes of memory should be
           reserved for buffered Direct Memory Access (DMA).

        An example of this may be:

           C:\WINDOWS\EMM386.EXE D=64

 

        ***********************************************************
        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                             Oriole 16AC Sound Card      *
        *********************************************************** 

                        -------  The End  ---------
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.61