Additional Information
Audio Telephony Sound Card V1.20
This file contains additional information and changes about the
various software that was not available at printing time.
FaxWork 3.0 - Known Issues
==========================
"Message Retrieval..." and "Record Memo..." functions in the FaxWork's
"More" option does not work well under Win3.1x and Win95 with "Answer
Call" disabled in the Voice Setup option. Currently, it is required to
enable the "Answer Call" option found in the Voice Setup menu for proper
operation of these functions.
Updates
=======
The current default factory setting for the Telephony Board's Modem Port
is at COM Port 1 (3F8) and Interrupt 4. However, these settings may easily
conflict with the existing configuration used in your system (e.g. COM1).
Please refer to Page B~3 in the User Manual on how to re-configure the
Modem Port to COM 3 (3E8) and Modem Interrupt to IRQ 11 using the jumper
located in JM1, JM2 and MODEMIRQ accordingly. The Installation Software
have been modified to install the Modem Port using these new COM 3 settings.
Installing under Windows 95
===========================
When installing the Audio Telephony software under Windows 95, please
ensure that you are running the installation Software from the diskettes
itself and do not run it from the hard drive.
The default software setting for the modem port on the Telephony Board is
at COM Port 3 (3E8) and is using Interrupt 11. If these settings conflict
with your existing configurations in the system, please refer to the user
manual for changing the Modem Port to a conflict free setting via jumpper
setting.
Note : Please switch off the system power supply prior to the changing of
the board's configuration settings.
You need to register this new COM Port setting to Windows 95 system
by simply double click on the <Add New Hardware> applet in the Control
Panel menu. Next, click at the <Next> button and Win95 will prompt "Do
you want Windows 95 to search for your new hardware..". Select "Yes"
and proceed the searching by clicking the <Next> button again. Upon
completion, Windows 95 will prompt you to restart system to take effect
of the new COM Port setting.
Installing under Windows 3.1x
=============================
The default modem port was set at COM 3 and Interrupt 11, If these
settings conflict with your existing configurations in the system,
re-configure the modem port to a conflict free setting by changing
the JM1, JM2 and MODEMIRQ jumpers, next update the SYSTEM.INI file
(under \WINDOWS directory) accordingly (see below example) for the
new setting to take effect under Windows 3.1x:
e.g. If the new ComPort/IRQ settings are changed to COM 4 with Based
I/O Address: 2E8 and Interrupt: IRQ 3), modify the following
statements under the [386Enh] section in the SYSTEM.INI file.
Existing SYSTEM.INI ----> Updated SYSTEM.INI
------------------- ------------------
[386Enh] [386Enh]
. .
. .
COM3Base=03E8 COM4Base=02E8
COM3Irq=11 COM4Irq=3
. .
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* P-AT2150 Sound Card *
* P-AT2160 Sound Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.