Diagnostic LEDs This is an ASCII file called DIAGLED.TXT in the ATI CardAssistant INFO directory. Use a text editor or a word processor with a mono-space font such as Courier to print this file if needed for reference. ************************************************************ ** ** ** Functions of the Diagnostics LEDs ** ** ** ************************************************************ TX: Indicates the card is transmitting packets on the network. RX: Indicates the card is receiving packets on the network. LNK: Indicates the adapter is connected to a hub or switch and is receiving link pulses. If the LNK light isn't on, check all connections at the adapter. Make sure the hub or switch is transmitting at the correct speed and the drivers are loaded. N/L The NIC is in 100Mb mode when yellow LED is active. * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.