1. 2450V440.exe Driver
2. PERMANET.TXT File Contents

PERMANET.TXT Driver File Contents (2450V440.exe)

Permanet for Netware

 This file gives examples to set up PermaNet Server of ATI's
 AT-2700/AT-2450 with NetWare 4.11 or NetWare 5.00 Server.
 Make sure the driver CATNICPS.LAN is copied onto the
 NetWare system (SYS:SYSTEM) directory.  The user can copy
 the following section to the AUTOEXEC.NCF of NetWare
 system, and customize them for your server's parameters.
 Or copy the  follow section to make a *.NCF file, and at
 AUTOEXEC.BAT set a command to run the *.NCF file.

 Also, a user can copy the following sections twice to set
 up 2 PermaNet pairs. The order in which the boards are
 loaded is important. The primary adapter should be loaded
 first before the secondary adapters are loaded.

 Netware's Install (Netware 4.11) or Nwconfig (Netware 5.0)
 utilities will install the PermaNet feature using the
 Catnicps.ldi file and enabling the PermaNet feature during
 driver installation.  The primary and secondary slots are
 required at time of installation.

 EXAMPLE:

 LOAD catnicps PCI SLOT=1 Secondary=2 FRAME=Ethernet_802.2 
 BIND IPX catnicps net=11

 parameter: SECONDARY

   type:      numeric, custom, optional   

   value:     This parameter is used only when the adapter
              is loaded in PeraNet mode, otherwise
              it is ignored.
              
   Desc:      This is used to determine the slot number for
              the secondary backup adapter for the PermaNet
              feature. If this parameter is present, the
              driver is enabled with PermaNet feature.