Hardware specifications
This is an ASCII file called HWSPECS.TXT in the ATI
CardAssistant INFO directory. Use a text editor or a
word processor with a mono-space font such as Courier
to print this file if needed for reference.
************************************************************
** **
** Specifications for the ATI AT-2700 PCI adapter **
** **
************************************************************
System compatibility
--------------------
PCI systems
PC Interface
------------
Bus Interface PCI, 2.1 compliant
Bus Width 32-bit
Data Transfer Mode PCI Bus Mastering
Ethernet Interface
------------------
AT-2700TX 100/10 Base TX
AT-2700FX 100 Base FX
AT-2450F 10 Base FL
Data Rate modes
---------------
AT-2700TX 100/10 Mbps
AT-2700FX 100 Mbps
AT-2450F 10 Mbps
Interrupt levels
----------------
PCI: INTA, supports shared or assigned interrupts
Base I/O Memory Address
-----------------------
Assigned by BIOS
PCI configuration space supports DWORD, WORD and BYTE access
Power requirements
------------------
5 Watts @ +5 VDC
Dimensions
----------
Half Size form factor
Operating temperature
---------------------
0 - 55 degrees C (32 - 131 F)
Operating Humidity
------------------
85% at +55 C non-condensing
Reliability
-----------
Calculated MTBF > 300,000 hours
Standards Compliance
--------------------
IEEE 802.2, 802.3u, ISO, IEC 8802-3
Electrical Approvals
--------------------
FCC Class A, CUL, CE
Diagnostic LEDs
---------------
TX Indicates that packets are being transmitted
on the network.
RX Indicates that packets are being received
on the network.
Link Indicates that a valid connection exists.
N/L Indicates full duplex (AT-2700FX/AT-2450) or
100 Mbps (AT-2700TX) operation.
Diagnostic software
-------------------
On-board
On-network
Responder
* Third-party trademarks are the property of their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.