; Windows Modem Setup File
; Copyright 1997 Microsoft Corp.
; Manufacturer: ZyXEL Communications Corp.
[Version]
; created on 04/06/98 by Manfred Recla <support@zyxel.co.at>
; for ZyXEL Comet 3356 Fax+Modem+Voice, v1.10A - 1.009-K56_DSL
; using the Rockwel chipset: 'RCVDL56ACF/SVD' (chip code: R6762-27)
; with enhanced voice support for Windows98 and WindowsNT 5.0
; based on MS-MDK v1.40 (MDK140.DOC & REG140.DOC, December 1997)
; 04/06/98 -> Default key ("Waiting for Dialtone" set to OFF)
; for Slovakia & Slovenija
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
;LayoutFile=layout.inf
[Strings]
Mfg = "ZyXEL Communications Corp."
ZC3356 = "ZyXEL Comet 3356 Modem+Fax+Voice"
ZC3356.PnP = "ZyXEL Comet 3356 Modem+Fax+Voice, Plug&Play"
;[ZC3356.mu-Law.NoResDup]
;UNIMODEME5F844FE
[ZC3356.A-Law.NoResDup]
UNIMODEME5F844FE
[ControlFlags]
ExcludeFromSelect=SERENUM\AKY1007
ExcludeFromSelect=SERENUM\RSS00A0
ExcludeFromSelect=SERENUM\ZYX8501
[Manufacturer]
%Mfg% = ZyXEL
[ZyXEL]
%ZC3356% = ZC3356.A-Law, UNIMODEME5F844FE
%ZC3356.PnP% = ZC3356.A-Law, SERENUM\ZYX8501
%ZC3356.PnP% = ZC3356.A-Law, Rockwell, SERENUM\RSS00A0
%ZC3356.PnP% = ZC3356.A-Law, Askey, SERENUM\AKY1007
;[ZC3356.mu-Law]
;AddReg=AllMfg.AddReg, ZC3356.Data, ZC3356.Voice, ZC3356.Fax, K56.mu-Law, EXTERNAL
;[K56.mu-Law]
;HKR, K56mode, 1,,"AT+MS=56,1,32000,56000,0<cr>"
[ZC3356.A-Law]
AddReg=AllMfg.AddReg, ZC3356.Data, ZC3356.Voice, ZC3356.Fax, K56.A-Law, EXTERNAL
[K56.A-Law]
HKR, K56mode, 1,,"AT+MS=56,1,32000,56000,1<cr>"
[ZC3356.Data]
HKR,,Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, 7f,07,00,00, 00,c2,01,00, c0,da,00,00
HKR,, DCB, 1, 1c,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00, 00, 00
HKR,, Default, 1, 3c,00,00,00,00,00,00,00, 00,00,00,00,01,00,00,00, 53,03,00,00
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, Compression_Off,, "%%C0"
HKR, Settings, Compression_On,, "%%C3"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, ErrorControl_Off,, "&Q6\N0"
HKR, Settings, ErrorControl_On,, "&Q5\N3"
HKR, Settings, ErrorControl_Forced,, "&Q5\N2"
HKR, Settings, ErrorControl_Cellular,, "\N3\X0&Q5-K1*H1)M1-C1-Q0"
HKR, Settings, ErrorControl_Cellular_Forced,, "\N4\X0&Q5-K1*H1)M1-C1-Q0"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"
HKR, Settings, FlowControl_Soft,, "&K4"
HKR, Settings, InactivityTimeout,, "S30=<#>"
HKR, Settings, Modulation_CCITT,, "B0"
HKR, Settings, Modulation_CCITT_V23,, "+MS=3"
HKR, Settings, Modulation_Bell,, "B1"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Pulse,, "P"
HKR, Settings, SpeakerVolume_Low,, "L1"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
;HKR, Settings, SpeedNegotiation_Off,, "N0"
;HKR, Settings, SpeedNegotiation_On,, "N1"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, Tone,, "T"
[ZC3356.Fax]
HKR, Fax\Class1\AdaptiveAnswer,SetupCommand,, "AT+FAE=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 1,, "AT&FE0V1Q0S95=46S0=0"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 2,, "ATS7=60S30=0L0M1&Q5\N3%C3&K3B0N1X4"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 3,, "AT+FAE=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 4,, "ATA"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxDetect,, "FAX"
HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedFaxDetect,, "19200"
HKR, Fax\Class1\AdaptiveAnswer,HostCommandFaxDetect,, "ATO"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxConnect,, "CONNECT"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataDetect,, "DATA"
HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedDataDetect,, "19200"
HKR, Fax\Class1\AdaptiveAnswer,HostCommandDataDetect,, "ATO"
HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataConnect,, "CONNECT"
;HKR, Fax, ExitCommand,, ""
;HKR, Fax, PreAnswerCommand,, ""
;HKR, Fax, PreDialCommand,, ""
;HKR, Fax, ResetCommand,, ""
;HKR, Fax, SetupCommand,, ""
;HKR, Fax, EnableV17Recv,, "1"
;HKR, Fax, EnableV17Send,, "1"
;HKR, Fax, FixModemClass,, "1"
;HKR, Fax, FixSerialSpeed,, "19200"
;HKR, Fax, HighestSendSpeed,, "14400"
;HKR, Fax, LowestSendSpeed,, "2400"
;HKR, Fax, HardwareFlowControl,, "1"
;HKR, Fax, SerialSpeedInit,, "57600"
;HKR, Fax, Cl1DontSync,, "1"
;HKR, Fax, Cl1FCS,, "0"
;HKR, Fax, Class1DTESpeed,, "AUTO"
;HKR, Fax, Class1FlowHW,, "+FLO=2"
;HKR, Fax, Class1FlowOff,, "+FLO=0"
;HKR, Fax, Class1FlowSW,, "+FLO=1"
;HKR, Fax, AnswerMode,, "2"
;HKR, Fax, BlindDial,, "2"
;HKR, Fax, CommaDelay,, "2"
;HKR, Fax, CopyQualityCheckLevel,, "1"
;HKR, Fax, DialToneWait,, "30"
;HKR, Fax, DisableG3ECM,, "1"
;HKR, Fax, DisableMRRecv,, "1"
;HKR, Fax, DisableMRSend,, "1"
;HKR, Fax, DontPurge,, "0"
;HKR, Fax, HangupDelay,, "60"
;HKR, Fax, ModemFaxClasses,, "14"
;HKR, Fax, ModemIdCmd,, "ATI1"
;HKR, Fax, NumRings,, "2"
;HKR, Fax, SpeakerMode,, "1"
;HKR, Fax, Volume,, "2"
[EXTERNAL]
HKR,, DeviceType, 1, 01
[ZC3356.Voice]
HKR,,Enumerator,,serwave.vxd
HKR,,VoiceProfile, 1, 27,22,09,02
; ------- start section for NT5 voice support --------------
; see REG140.DOC for details on next NT5 voice section.
HKR, WaveDriver, BaudRate, 1, 00,c2,01,00
HKR, WaveDriver, XformID, 1, 01,00
HKR, WaveDriver, WaveDevices, 1, 02,00
HKR, WaveDriver, XformModule, , "umdmxfrm.dll"
HKR, WaveDriver, WaveHardwareID, , "ZyXEL_Comet_3356_VoiceModemWave"
; ------- end section for NT5 voice support --------------
;HKR,, VoiceMixerMid, 1,16,00
;HKR,, VoiceMixerPid, 1,15,00
;HKR,, VoiceMixerLineID, 1,00,00,04,00
; speakerphone settings, next section:
HKR,, SpeakerPhoneSpecs, 1, 08,00,00,00, 0f,00,00,00, 01,00,00,00, 00,00,00,00
HKR, SpeakerPhoneEnable, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneEnable, 2,, "at#cls=8<cr>"
HKR, SpeakerPhoneEnable, 3,, "at#spk=1,8,1<cr>"
HKR, SpeakerPhoneDisable, 1,, "at#spk=0,16,,<cr>"
HKR, SpeakerPhoneDisable, 2,, "at#vls=0<cr>"
HKR, SpeakerPhoneMute, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneMute, 2,, "at#spk=0,,,<cr>"
HKR, SpeakerPhoneUnMute, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneUnMute, 2,, "at#spk=1,,,<cr>"
HKR, SpeakerPhoneSetVolumeGain, 1,, "at#vls=6<cr>"
HKR, SpeakerPhoneSetVolumeGain, 2,, "at#spk=,<Vol>,<Gain><cr>"
; handset settings, next section:
HKR,, HandsetCloseDelay, 1, 1e,00,00,00
HKR, HandsetSetRecordFormat, 1,, "at#vsr=7200<cr>"
HKR, HandsetSetRecordFormat, 2,, "at#vbs=4<cr>"
HKR, HandsetSetPlayFormat, 1,, "at#vsr=7200<cr>"
HKR, HandsetSetPlayFormat, 2,, "at#vbs=4<cr>"
HKR, OpenHandset, 1,, "at#cls=8<cr>"
HKR, OpenHandset, 2,, "at#vls=1<cr>"
HKR, CloseHandset, 1,, "at#vls=0<cr>"
HKR, CloseHandset, 2,, "at#cls=0<cr>"
HKR, StartPlay, 1,, "at#vtx<cr>"
HKR, StopPlay, 1,, "None"
HKR, StopPlay, 2,, "NoResponse"
HKR, StartRecord, 1,, "at#vrx<cr>"
HKR, StopRecord, 1,, "None"
HKR, StopRecord, 2,, "NoResponse"
; note: change in TerminateRecord macro to "!"
; HKR,, TerminateRecord,, "<h10>E<cr>"
HKR,, TerminateRecord,, "!"
HKR,, TerminatePlay,, "<h10><h03>"
HKR,, AbortPlay,, "<h10><h18>"
HKR, LineSetPlayFormat, 1,, "at#vls=0<cr>"
HKR, LineSetRecordFormat, 1,, "None"
HKR, LineSetRecordFormat, 2,, "NoResponse"
HKR, VoiceToDataAnswer, 1,, "at#cls=0<cr>"
HKR, VoiceToDataAnswer, 2,, "ata<cr>"
HKR, VoiceAnswer, 1,, "at#cls=8<cr>"
HKR, VoiceAnswer, 2,, "at#vls=0<cr>"
HKR, VoiceAnswer, 3,, "at#vbt=1<cr>"
HKR, VoiceAnswer, 4,, "at#vsr=7200<cr>"
HKR, VoiceAnswer, 5,, "at#vbs=4<cr>"
HKR, VoiceAnswer, 6,, "ata<cr>"
HKR, VoiceDialNumberSetup, 1,, "at#cls=8<cr>"
HKR, VoiceDialNumberSetup, 2,, "at#vls=0<cr>"
HKR, VoiceDialNumberSetup, 3,, "at#vrn=0<cr>"
HKR, VoiceDialNumberSetup, 4,, "at#vbt=1<cr>"
HKR, VoiceDialNumberSetup, 5,, "at#vsr=7200<cr>"
HKR, VoiceDialNumberSetup, 6,, "at#vbs=4<cr>"
HKR,, CallerIDPrivate,, P
HKR,, CallerIDOutSide,, O
HKR,, VariableTerminator,, <cr><lf>
HKR,, ForwardDelay, 1,88,13
HKR, GenerateDigit, 1,, "at#vts=<Digit><cr>"
HKR, EnableCallerID, 1,, "at#cid=1<cr>"
HKR, EnableDistinctiveRing, 1,, "at-sdr=7<cr>"
HKR, Responses, "<cr><lf>VCON<cr><lf>" ,1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DATE = " ,1, 93, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "TIME = " ,1, 94, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NMBR = " ,1, 95, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NAME = " ,1, 96, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "MESG = " ,1, 97, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING1<cr><lf>" ,1, 18, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING2<cr><lf>" ,1, 19, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING3<cr><lf>" ,1, 1a, 00, 00,00,00,00, 00,00,00,00
[AllMfg.AddReg]
HKR,,Logging, 1, 01
HKR,,LoggingPath,, "ModemLog.txt"
HKR,,ConfigDialog,,modemui.dll
HKR,,DevLoader,,*vcomm
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,,FriendlyDriver,,Unimodem.VXD
HKR,, InactivityScale, 1, 0a,00,00,00
HKR,,PortSubClass,1,02
HKR,, Reset,, "ATZ<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Init, 1,, "AT<cr>"
HKR, Init, 2,, "AT&FE0V1&C1&D2S95=46S0=0<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 1c, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED ", 1, 1d, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+FCERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+F4<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>FAX<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DATA<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>VOICE<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+FCON<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
; standard CARRIER responses
HKR, Responses, "<cr><lf>CARRIER 300<cr><lf>", 1, 01, 00, 2c,01,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 1200<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 2400<cr><lf>", 1, 01, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 4800<cr><lf>", 1, 01, 00, c0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 7200<cr><lf>", 1, 01, 00, 20,1c,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 9600<cr><lf>", 1, 01, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 12000<cr><lf>", 1, 01, 00, e0,2e,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 14400<cr><lf>", 1, 01, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 16800<cr><lf>", 1, 01, 00, a0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 19200<cr><lf>", 1, 01, 00, 00,4b,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 21600<cr><lf>", 1, 01, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 24000<cr><lf>", 1, 01, 00, c0,5d,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 26400<cr><lf>", 1, 01, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 28800<cr><lf>", 1, 01, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 31200<cr><lf>", 1, 01, 00, e0,79,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 33600<cr><lf>", 1, 01, 00, 40,83,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 75/1200<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 1200/75<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00
; extended (K56.flex) CARRIER responses
HKR, Responses, "<cr><lf>CARRIER 32000<cr><lf>", 1, 01, 00, 00,7d,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 34000<cr><lf>", 1, 01, 00, d0,84,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 36000<cr><lf>", 1, 01, 00, a0,8c,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 38000<cr><lf>", 1, 01, 00, 70,94,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 40000<cr><lf>", 1, 01, 00, 40,9c,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 42000<cr><lf>", 1, 01, 00, 10,a4,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 44000<cr><lf>", 1, 01, 00, e0,ab,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 46000<cr><lf>", 1, 01, 00, b0,b3,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 48000<cr><lf>", 1, 01, 00, 80,bb,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 50000<cr><lf>", 1, 01, 00, 50,c3,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 52000<cr><lf>", 1, 01, 00, 20,cb,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 54000<cr><lf>", 1, 01, 00, f0,d2,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 56000<cr><lf>", 1, 01, 00, c0,da,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 58000<cr><lf>", 1, 01, 00, 90,e2,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CARRIER 60000<cr><lf>", 1, 01, 00, 60,ea,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>COMPRESSION: NONE<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>COMPRESSION: CLASS 5<cr><lf>", 1, 01, 01, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>COMPRESSION: V.42BIS<cr><lf>", 1, 01, 01, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>PROTOCOL: NONE<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>PROTOCOL: LAP-M<cr><lf>", 1, 01, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>PROTOCOL: ALT<cr><lf>", 1, 01, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>PROTOCOL: ALT-CELLULAR<cr><lf>", 1, 01, 0a, 00,00,00,00, 00,00,00,00
; if s95=46: responses DTE speed without error correction
HKR, Responses, "<cr><lf>CONNECT 1200<cr><lf>", 1, 02, 00, 00,00,00,00, b0,04,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 00,00,00,00, 60,09,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, 00,00,00,00, c0,12,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 00,00,00,00, 80,25,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,00,00,00, 00,4b,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,00,00,00, 00,96,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,00,00,00, 00,e1,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,00,00,00, 00,c2,01,00
; if s95=46: responses DTE speed with error correction
HKR, Responses, "<cr><lf>CONNECT 1200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, b0,04,00,00
HKR, Responses, "<cr><lf>CONNECT 2400/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 60,09,00,00
HKR, Responses, "<cr><lf>CONNECT 4800/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, c0,12,00,00
HKR, Responses, "<cr><lf>CONNECT 9600/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 80,25,00,00
HKR, Responses, "<cr><lf>CONNECT 19200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,4b,00,00
HKR, Responses, "<cr><lf>CONNECT 38400/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,96,00,00
HKR, Responses, "<cr><lf>CONNECT 57600/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,e1,00,00
HKR, Responses, "<cr><lf>CONNECT 115200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,c2,01,00
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.