OEMSETNT.INF Driver File Contents (et6vcp.zip)

[Identification]
    OptionType = VIDEO
[Identify]
    read-syms Identification
    set Status	   = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media	   = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ServicesEntry]
    CurrentEntry = "" ? $(!LIBHANDLE) GetDevicemapValue Video \Device\Video0
[SystemVariables]
    STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
    STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir
[MiniportDrivers]
;
; Order of the information:
;
; Port driver = Type, Group, ErrorControl, Tag, InstalledDisplay, VgaCompatible( 0/1 ), EventMessageFile, TypesSupported
;
;    oemvio   = !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_NORMAL, 11,  {oem,oem256}, 1 , %SystemRoot%\System32\IoLogMsg.dll , 7
;    w32 = w32, !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_NORMAL, 11,  {w32},	 1 , %SystemRoot%\System32\IoLogMsg.dll , 7, 1, {}, noconfig
    w32    = w32   , !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_NORMAL, {vga,w32,vga256,vga64k}, 1, "%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\w32.sys", 7, 1, {}, noconfig
[OpenGLDrivers]
[ExternalInstallOption]
    Set !G:DebugOutputControl = 0
    set Exit_Code   = $(!SETUP_ERROR_GENERAL)
    install LoadSetupLibrary
    ifstr(i)	  $(STF_LANGUAGE)  == ""
	goto end
    else-ifstr(i) $(OPTION)	   == ""
	goto end
    else-ifstr(i) $(INITSRC)	   == ""
	goto end
    else-ifstr(i) $(ADDCOPY)	   == ""
	goto end
    else-ifstr(i) $(DOCOPY)	   == ""
	goto end
    else-ifstr(i) $(DOCONFIG)	   == ""
	goto end
    else-ifstr(i) $(DOINSTALL)	   == ""
	goto end
    else-ifstr(i) $(INFFILE)	   == ""
	goto end
    endif
    LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
    set STF_CONTROLSET = CurrentControlSet
    read-syms SystemVariables
    detect    SystemVariables
    shell $(INFFILE) InstallOption $(STF_LANGUAGE) $(OPTION) $(INITSRC) $(ADDCOPY) $(DOCOPY) $(DOCONFIG) $(DOINSTALL)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "Execing Configuring hardware failed"
	goto end
    endif
    ifstr(i) $($R0) == STATUS_SUCCESSFUL
	set Exit_Code = $(!SETUP_ERROR_SUCCESS)
    else-ifstr(i) $($R0) == STATUS_USERCANCEL
	set Exit_Code = $(!SETUP_ERROR_USERCANCEL)
    endif
end =+
    install   FreeSetupLibrary
    FreeLibrary $(!LIBHANDLE)
    exit
[InstallOption]
    set Status	     = STATUS_FAILED
    set DrivesToFree = {}
    set !Option   = $($1)
    set SrcDir	  = $($2)
    set AddCopy   = $($3)
    set DoCopy	  = $($4)
    set DoConfig  = $($5)
    set DoInstall = $($6)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_InstallOption
    endif
    read-syms Strings$($0)
    ifstr(i) $(!Option) != "DETECT"
	set OptionList = ^(Options, 0)
	ifcontains $(!Option) in $(OptionList)
	else
	    goto finish_InstallOption
	endif
	set OptionList = ""
	set DriverEntry       =   #(Options, $(!Option), 1)
	set MiniportDriver    =   #(MiniportDrivers, $(DriverEntry), 1)
	set InstalledDisplays =   #(MiniportDrivers, $(DriverEntry), 5)
	set OtherFiles	      =   #(MiniportDrivers, $(DriverEntry), 10)
    endif
    read-syms ServicesEntry
    detect    ServicesEntry
    set DriversList	   = ^(MiniportDrivers, 0)
    set MiniportDriverList = ^(Files-DisplayMiniportDrivers, 0)
    set DisplayDriverList  = ^(Files-DisplayDLLs, 0)
    set OpenGLDriverList   = ^(OpenGLDrivers, 0)
installtheoption = +
    ifstr(i) $(AddCopy) == "YES"
	ifstr(i) $(!Option) == "DETECT"
	    set DoActualCopy = YES
	else
	    set DoActualCopy = NO
	    set FileToCheck = #(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
	    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
	    ifstr(i) $(STATUS) == NO
		set DoActualCopy = YES
		goto addfiles
	    endif
	    ForListDo $(OtherFiles)
		ifcontains $($) in $(MiniportDriverList)
		    set FileToCheck = #(Files-DisplayMiniportDrivers, $($), 2)
		    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
		    ifstr(i) $(STATUS) == NO
			set DoActualCopy = YES
			goto addfiles
		    endif
		endif
	    EndForListDo
	    ForListDo $(InstalledDisplays)
		ifcontains $($) in $(DisplayDriverList)
		    set FileToCheck = #(Files-DisplayDLLs, $($), 2)
		    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
		    ifstr(i) $(STATUS) == NO
			set DoActualCopy = YES
			goto addfiles
		    endif
		    ifcontains $($) in $(OpenGLDriverList)
			set FileToCheck = #(Files-DisplayOpenGLDrivers, #(OpenGLDrivers, $($), 1), 2)
			LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
			ifstr(i) $(STATUS) == NO
			    set DoActualCopy = YES
			    goto addfiles
			endif
		    endif
		endif
	    EndForListDo
	endif
addfiles = +
	ifstr(i) $(DoActualCopy) == NO
	    shell "subroutn.inf" DriversExist $($0) $(String1)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "VIDEO.INF: shelling DriversExist failed"
		goto finish_InstallOption
	    endif
	    ifstr(i) $($R0) == STATUS_CURRENT
	    else-ifstr(i) $($R0) == STATUS_NEW
		set DoActualCopy = YES
	    else-ifstr(i) $($R0) == STATUS_USERCANCEL
		Debug-Output "VIDEO.INF: User cancelled video installation"
		goto finish_InstallOption
	    else
		Debug-Output "VIDEO.INF: Error reported in DriversExist routine in SUBROUTN.INF"
		goto finish_InstallOption
	    endif
	endif
	ifstr(i) $(DoActualCopy) == YES
;	    This gets the path from which NT was installed.  We want to
;	    stick with A:\ or whatever.
;	    shell "registry.inf" GetNTSource
;	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
;	    else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
;	    else
;		set SrcDir = $($R1)
;	    endif
	    shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "VIDEO.INF: shelling DoAskSourceEx failed"
		goto finish_InstallOption
	    endif
	    ifstr(i) $($R0) == STATUS_SUCCESSFUL
		set SrcDir = $($R1)
		ifstr(i) $($R2) != ""
		    set DrivesToFree = >($(DrivesToFree), $($R2))
		endif
	    else
		Debug-Output "VIDEO.INF: User cancelled asking source."
		goto finish_InstallOption
	    endif
	    ifstr(i) $(!Option) != "DETECT"
		install Install-AddCopyOption
	    else
		install Install-AddAllCopy
	    endif
	    ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
		Debug-Output "VIDEO.INF: Adding video files to copy list failed"
		goto finish_InstallOption
	    endif
	else
	    set DoCopy = NO
	endif
    endif
    ifstr(i) $(DoCopy) == "YES"
	read-syms ProgressCopy$($0)
	install Install-DoCopyOption
	ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
	    Debug-Output "Copying files failed"
	    goto finish_InstallOption
	else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
	    set Status = STATUS_USERCANCEL
	    goto finish_InstallOption
	endif
    endif
    ifstr(i) $(DoConfig) == "YES"
	shell "registry.inf" CheckSetupModify
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto finish_InstallOption
	endif
	ifstr(i) $($R0) != STATUS_SUCCESSFUL
	    goto finish_InstallOption
	endif
	ForListDo $(DriversList)
	    ifstr(i) $(!Option) == "DETECT"
		set DriverEntry = $($)
		set DeviceDescription = ""
		set ErrorControl      = $(!SERVICE_ERROR_IGNORE)
		ifcontains #(MiniportDrivers, $(DriverEntry), 1) in $(MiniportDriverList)
		    ifint #(MiniportDrivers, $(DriverEntry), 9) == 1
			set configDriver = YES
		    else
			set configDriver = NO
		    endif
		else
		    set configDriver = NO
		endif
	    else
		set DeviceDescription = $(!Option)
		set ErrorControl      = $(#(MiniportDrivers, $(DriverEntry), 4))
		ifstr(i) $(DriverEntry) == $($)
		    set configDriver = YES
		else
		    set configDriver = NO
		endif
	    endif
	    ifstr(i) $(configDriver) == YES
		Debug-Output "configuring the miniport driver"
		set MiniportDriver    =   #(MiniportDrivers, $(DriverEntry), 1)
		set Type	      = $(#(MiniportDrivers, $(DriverEntry), 2))
		set Group	      =   #(MiniportDrivers, $(DriverEntry), 3)
		set InstalledDisplays =   #(MiniportDrivers, $(DriverEntry), 5)
		set VgaCompatible     =   #(MiniportDrivers, $(DriverEntry), 6)
		set EventMessageFile  =   #(MiniportDrivers, $(DriverEntry), 7)
		set TypesSupported    =   #(MiniportDrivers, $(DriverEntry), 8)
		set ServiceNode   = $(DriverEntry)
		set ServiceBinary = %SystemRoot%\System32\drivers\#(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
		set ServicesValues = { +
			{Type,		 0, $(!REG_VT_DWORD),	  $(Type)		   }, +
			{Group, 	 0, $(!REG_VT_SZ),	  $(Group)		   }, +
			{ErrorControl,	 0, $(!REG_VT_DWORD),	  $(ErrorControl)	   }, +
			{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary)	   }  +
			}
		ifstr(i) $(DoInstall) == "YES"
		    set ServicesValues = >($(ServicesValues), +
			    {Start,	     0, $(!REG_VT_DWORD),     $(!SERVICE_SYSTEM_START) })
		else
		    set ServicesValues = >($(ServicesValues), +
			    {Start,	     0, $(!REG_VT_DWORD),     $(!SERVICE_DISABLED)     })
		endif
		set !ParametersValues = { +
			{"Device Description",        0, $(!REG_VT_SZ),       $(DeviceDescription) }, +
			{InstalledDisplayDrivers,     0, $(!REG_VT_MULTI_SZ), $(InstalledDisplays) }, +
			{VgaCompatible, 	      0, $(!REG_VT_DWORD),    $(VgaCompatible)	   }, +
			{DefaultSettings.BitsPerPel,  0, $(!REG_VT_DWORD),    0 		   }, +
			{DefaultSettings.VRefresh,    0, $(!REG_VT_DWORD),    0 		   }, +
			{DefaultSettings.Interlaced,  0, $(!REG_VT_DWORD),    0 		   }, +
			{DefaultSettings.XResolution, 0, $(!REG_VT_DWORD),    0 		   }, +
			{DefaultSettings.YResolution, 0, $(!REG_VT_DWORD),    0 		   }  +
			}
		ifstr(i) $(!Option) != "DETECT"
		    shell "" #(MiniportDrivers, $(DriverEntry), 11)
		endif
		set DeviceValues = {}
		set EventLogValues = { +
			{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
			{TypesSupported,   0, $(!REG_VT_DWORD),     $(TypesSupported)	}  +
			}
		shell "registry.inf"  MakeServicesEntry $(ServiceNode)       +
							$(ServicesValues)    +
							$(!ParametersValues) +
							$(DeviceValues)      +
							$(EventLogValues)    +
							Device0
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
		    goto finish_InstallOption
		endif
		ifstr(i) $($R0) != STATUS_SUCCESSFUL
		    Debug-Output "MakeServicesEntry failed for video"
		    goto finish_InstallOption
		endif
		ForListDo $(InstalledDisplays)
		    ifcontains $($) in $(OpenGLDriverList)
			set KeyPath = { +
				{SOFTWARE,	 0, $(MaskAllAccess)}, +
				{Microsoft,	 0, $(MaskAllAccess)}, +
				{"Windows NT",   0, $(MaskAllAccess)}, +
				{CurrentVersion, 0, $(MaskAllAccess)}, +
				{OpenGLDrivers,  0, $(MaskAllAccess)}  +
				}
			set KeyValue = { +
				{$($), 0, $(!REG_VT_SZ), #(OpenGLDrivers, $($), 1) } +
				}
			shell "registry.inf" CreateKey $(!REG_H_LOCAL) $(KeyPath) $(KeyValue)
			Debug-Output "just did an OGL section"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			    Debug-Output "Couldn't execute CreateKey in registry.inf"
			    goto endInstallOpenGLDriver
			endif
			ifstr(i) $($R0) != STATUS_SUCCESSFUL
			    Debug-Output "CreateKey failed for OGLDrivers"
			    goto endInstallOpenGLDriver
			endif
			Debug-Output "VIDEO.INF: success installing an ogl entry"
		    endif
		EndForListDo
	    endif
	EndForListDo
    endif
    set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
    ForListDo $(DrivesToFree)
	LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
    EndForListDo
    Return $(Status)
[Install-AddCopyOption]
    Debug-Output "adding to copy list"
    set STF_VITAL = ""
    AddSectionKeyFileToCopyList   Files-DisplayMiniportDrivers	 +
				  $(MiniportDriver)		 +
				  $(SrcDir)			 +
				  $(!STF_WINDOWSSYSPATH)\drivers
    ForListDo $(OtherFiles)
	ifcontains $($) in $(MiniportDriverList)
	    Debug-Output "adding other files to copy list"
	    AddSectionKeyFileToCopyList   Files-DisplayMiniportDrivers	 +
					  $($)				 +
					  $(SrcDir)			 +
					  $(!STF_WINDOWSSYSPATH)\drivers
	endif
    EndForListDo
    ForListDo $(InstalledDisplays)
	ifcontains $($) in $(DisplayDriverList)
	    Debug-Output "adding display driver to copy list"
	    AddSectionKeyFileToCopyList   Files-DisplayDLLs	     +
					  $($)			     +
					  $(SrcDir)		     +
					  $(!STF_WINDOWSSYSPATH)
	    ifcontains $($) in $(OpenGLDriverList)
		Debug-Output "adding opengl driver to copy list"
		AddSectionKeyFileToCopyList   Files-DisplayOpenGLDrivers +
					      #(OpenGLDrivers, $($), 1)  +
					      $(SrcDir) 		 +
					      $(!STF_WINDOWSSYSPATH)
	    endif
	endif
    EndForListDo
    exit
[Install-AddAllCopy]
    Debug-Output "adding all drivers to copy list"
    set STF_VITAL = ""
    AddSectionFilesToCopyList  Files-DisplayMiniportDrivers   +
			       $(SrcDir)		      +
			       $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList  Files-DisplayDLLs	    +
			       $(SrcDir)		    +
			       $(!STF_WINDOWSSYSPATH)
    exit
[Install-DoCopyOption]
    CopyFilesInCopyList
    exit
[noconfig]
    return
[Source Media Descriptions]
    1 = "ET6000 Installation DISK (VIDEO)"  , TAGFILE = setup.ini
;[Signature]
;    FileType = MICROSOFT_FILE
;[GetSignature]
;    read-syms Signature
;    return $(FileType)
;[ProductType]
;STF_PRODUCT  = Winnt
;STF_PLATFORM = I386
[Files-DisplayDLLs]
w32 = 1,w32.dll, SIZE=999
[Files-DisplayMiniportDrivers]
w32 = 1,w32.sys , SIZE=999
[LanguagesSupported]
    ENG
[Options]
    "Tseng Labs ET6000"                        = w32
[OptionsTextENG]
    "Tseng Labs ET6000"                        = "Tseng Labs ET6000"
[ProgressCopyENG]
    ProInstall	 = "Tseng Labs ET6000 Install"
    ProCancel	 = "Cancel"
    ProCancelMsg = "The Tseng Labs ET6000 display driver is not completely "+
		   "installed.  Are you sure you want "+
		   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1	 = "Copying:"
    ProText2	 = "To:"
[StringsENG]
    String1 = "Display"
    String2 = "Please enter the full path to the Tseng Labs ET6000 display "+
	      "driver files, e.g., A:\.  Then choose Continue."

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.66