1. Driver_Utility_TEW-621PC_623PIv2.zip Driver
  2. String.ini File Contents

String.ini Driver File Contents (Driver_Utility_TEW-621PC_623PIv2.zip)

ÿþ

[Utility]

AppTitle=TEW-621PC Wireless Client Utility

MsgTitle=TEW-621PC Wireless Client Utility

ProductName=TEW-621PC Wireless Client Utility

Copyright1=Copyright(C) 2007 TRENDnet.

Copyright2=All rights reserved

;DriverVer=

;UtilityVer=

WEB=



;StrAdHocB

;StrAdHocG

;StrAdHocA



[FormMain]

MenuItAbout=About

MenuItOpen=Open

MenuItClose=Close



LbOperateMode=Mode:

StationMode=Station Mode

SoftAPMode=Access Point Mode



LbStaInfo=

LbStaSurvey=

LbStaProfile=

LbAPInfo=Link Information

LbAPCfg=Configuration

LbAPFilter=MAC Filter



[FormAbout]

LbDriverVer=Driver Version:

LbUtilityVer=Utility Version:

LbMAC=MAC Address:

BtnOk=OK



[FormMsgBox]

BtnOk=OK

BtnCancel=Cancel

BtnYes=Yes

BtnNo=No



[TFrameStaLinkInfo]

GBoxStatus=Wireless Network Status

LbProfile=Profile Name:

LbSSID=SSID:

LbStatus=Link Status:

LbNetType=Network Type:

LbWlMode=Wireless Mode:

LbChannel=Channel:

LbTxRate=Transmit Rate:

LbBSSID=AP MAC Address:

LbSignal=Signal Strength:



GBoxSecurity=Security Status

LbSecurity=Security:

LbAuthen=Authentication:



GBoxIP=TCP/IP Status

LbIPAddr=IP Address:

LbIPMask=Subnet Mask:

LbGateway=Gateway:

LbDNS=DNS Server:



GBoxAntenna=Smart Antenna Status

LbAlgState=Algorithm State:

LbRemain=Beacons Remaining:

LbRssi=Last Beacon RSSI:

LbAntennaMode=Antenna Mode:

LbLeft=Left

LbOmni=Omni

LbRight=Right

BtnReset=Reset



AlgState1=STARTUP

AlgState2=INITIAL_SCAN

AlgState3=SUSTAINED_USE

AlgState4=PERIODIC_RESCAN



GBoxChannel=Channel

LbCtrlCh=Control Channel:

LbExCh=Extension Channel:

LbChWidth=Channel Width:



[TFrameStaSurvey]

GBoxSurvey=Available Networks

LvSite_Col0=

LvSite_Col1=SSID

LvSite_Col2=Mode

LvSite_Col3=Ch

LvSite_Col4=Signal

LvSite_Col5=Security

LvSite_Col6=BSSID

PlSearch=Searching...

BtnRefresh=Refresh

BtnConnect=Connect



[TFrameStaProfile]

GBoxProfile=Profile List

LvProf_Col0=

LvProf_Col1=Name

LvProf_Col2=SSID

	

GBoxInfo=Profile Information

LbProfile=Profile Name:

LbSSID=SSID:

LbNetType=Network Type:

LbChannel=Channel

LbSecurity=Security

LbAuthen=Authentication:

LbEncryption=Encryption:



BtnAdd=Add

BtnEdit=Edit

BtnDelete=Delete

BtnImport=Import

BtnExport=Export

BtnConnect=Connect

BtnWPS=WPS



[TFrameAPInfo]

GBoxStatus=WLAN Status

LbSSID=SSID:

LbWlMode=Wireless Mode:

LbChannel=Current Channel:

LbPower=Output Power:



GBoxSecurity=Security Status

LbSecurity=Security:

LbAuthen=Authentication



GBoxIP=TCP/IP Status

LbIPAddr=IP Address:

LbIPMask=Subnet Mask:

LbGateway=Gateway:

LbDNS=DNS Server:



GBoxMAC=Association List

LvSite_Col0=

LvSite_Col1=Station MAC Address



[TFrameAPCfg]

GBoxWireless=Wireless Settings

LbSSID=SSID:

ChkSSID=Hide SSID

LbWlMode=Wireless Mode:

LbChannel=Channel:

LbPower=Tx Power:

LbPreamble=Preamble:

	

GBoxBridge=Bridge Adapter

	

GBoxSecurity=WLAN Security Configuration

LbWEP=WEP:

LbAuthen=Authentication:

LbDefKey=Default Key:

LbPhrase=Passphrase

LbKey1=Key 1:

LbKey2=Key 2:

LbKey3=Key 3:

LbKey4=Key 4:



BtnApply=Apply



[TFrameAPFilter]

LbType=Filter Type:

Disable=Disable

Accept=Accept

Reject=Reject



GBoxMAC=Filter MAC Address



BtnApply=Apply



[FormProfSet]

BtnActLater=Activate Later

BtnActNow=Activate Now

BtnBack=Back

BtnNext=Next

BtnCancel=Cancel



[TFrameNetType]

GBoxGeneral=General Connection Settings

LbProfile=Profile Name:

LbSSID=SSID:

BtnBrowse=Browse

LbNetType=Network Type:

	

GBoxAdHoc=Ad-Hoc Mode Settings

LbWlMode=Wireless Mode:

LbChannel=Channel:



[FormSiteSelect]

GBoxSurvey=Available Networks

PlSearch=Searching...

LvSite_Col0=

LvSite_Col1=SSID

LvSite_Col2=Mode

LvSite_Col3=Ch

LvSite_Col4=Signal

LvSite_Col5=Security

LvSite_Col6=BSSID



BtnRefresh=Refresh

BtnSelect=Select



[TFrameSecurity]

GBoxSecurity=Wireless Security

LbSecurity=Security:



[TFrameWEP]

GBoxWEP=Security Settings

LbWEP=WEP:

LbAuthen=Authentication:

LbDefKey=Default Key:

LbPhrase=Passphrase:

LbKey1=Key 1:

LbKey2=Key 2:

LbKey3=Key 3:

LbKey4=Key 4:



[TFrameWPAPSK]

GBoxWPAPSK=Security Settings

LbPhrase=Passphrase:

LbEncryption=Encryption:



[TFrameDot1x]

GBoxDot1x=Security Settings

LbAuthen=Authentication:

LbUser=User Name:

LbPasswd=Password:

LbMyCert=Certificate:

LbServerCA=Server CA:

ChkServerCA=Validate server certificate

LbInner=Inner Authentication:

LbEncryption=Encryption:



[TFrameAdvSet]

GBoxAdvance=Advanced Settings

LbPower=Power Save Mode:

LbPreamble=802.11b Preamble:

LbRTS=RTS Threshold:

LblRTS=(0 - 2347)

LbFRAG=FRAG Threshold:

LblFRAG=(256 - 2346)

ChkQoS=QoS

	

GBoxWlMode=Wireless Mode

ChkSuper=Super Mode



GBoxRaWlMode=Wireless Mode



[TFrameConfirm]

GBoxConfirm=Wireless Settings

LbProfile=Profile Name:

LbSSID=SSID:

LbNetType=Network Type:

LbWlMode=Wireless Mode:

LbChannel=Channel:



GBoxSecurity=Security Settings

LbSecurity=Security:

LbAuthen=Authentication:

LbEncryption=Encryption:



[FormRalinkWPS]

GBoxWPS=

PlSearch=Searching...

LvNetwork_Col0=

LvNetwork_Col1=SSID

LvNetwork_Col1=BSSID

LvNetwork_Col1=Ch

LvNetwork_Col1=Security

BtnRefresh=Refresh

GBoxDevPin=Pin Code

BtnPinRenew=Renew



BtnPIN=PIN

BtnPBC=PBC

ChkAssocIE=WPS Associate IE

ChkProbIE=WPS Probe IE

LbStatus=

BtnClose=Close



PBCStart=Start PBC connection

PINStart=Start PIN connection

PINErPinCode=Invaild Pin Code



WPS_NOTUSED=WPS status is not used

WPS_IDLE=WPS status is idled

WPS_EAP_REQ_NACK_RECEIVED=Receive EAP-Req (NACK)

WPS_SCAN_AP=Scanning AP

WPS_START_ASSOC=Begin associating to WPS AP

WPS_LINK_UP=Associated to WPS AP

WPS_EAPOL_START_SENT=Sending EAPOL-Start

WPS_EAP_RSP_ID_SENT=Sending EAP-Rsp(ID)

WPS_EAP_REQ_START_RECEIVED=Receive EAPReq WPS_Start

WPS_EAP_M1_SENT=Sending M1

WPS_EAP_M1_RECEIVED=Received M1

WPS_EAP_M2_RECEIVED=Received M2

WPS_EAP_M2_SENT=Sending M2

WPS_EAP_M2D_RECEIVED=Received M2D

WPS_EAP_M2D_SENT=Sending M2D

WPS_EAP_RSP_ACK_SENT=Sending EAP Response (ACK)

WPS_EAP_M3_SENT=Sending M3

WPS_EAP_M3_RECEIVED=Received M3

WPS_EAP_M4_RECEIVED=Received M4

WPS_EAP_M4_SENT=Sending M4

WPS_EAP_M5_SENT=Sending M5

WPS_EAP_M5_RECEIVED=Received M5

WPS_EAP_M6_RECEIVED=Received M6

WPS_EAP_M6_SENT=Sending M6

WPS_EAP_M7_SENT=Sending M7

WPS_EAP_M7_RECEIVED=Received M7

WPS_EAP_M8_RECEIVED=Received M8

WPS_EAP_M8_SENT=Sending M8

WPS_EAP_RSP_DONE_SENT=Sending EAP Response (Done)

WPS_EAP_REQ_DONE_RECEIVED=Received EAP Response (Done)

WPS_EAP_CONFIGURED=Configured

WPS_INVALID_SSID=Invalid SSID in PIN mode

WPS_EAP_REQ_WRONG_SMI=Receive EAP-Req with wrong WPS SMI Vendor Id

WPS_EAP_REQ_WRONG_VENDOR_TYPE=Receive EAP-Req with wrong WPS Vendor Type

WPS_EAP_FAILED=WPS Eap process failed

WPS_PBC_TOO_MANY_AP=Too many PBC AP available

WPS_PBC_NO_AP=No PBC AP available

WPS_EAP_FAIL_RECEIVED=Received EAP-FAIL

WPS_EAP_NONCE_MISMATCH=Receive EAP with wrong NONCE

WPS_EAP_INVALID_DATA=Receive EAP without integrity (Hmac mismatch)

WPS_PASSWORD_MISMATCH=Error PIN Code (R-Hash mismatch)

WPS_SUCC=WPS status is connected successfully



[FormRaWPSProf]

GBoxWPSProfile=

LbProfile=Profile Name:

LbSSID=SSID:

LbSecurity=Security:

Authen=Authentication:

Encryption=Encryption:

LbKeyIndex=Key Index:

LbKey=Key:

BtnSave=Save



[Message]

UseWZC1=The adapter is controlled by the utility.

UseWZC2=Do you want to use the Wireless Zero Configuration?

UseUtility1=The adapter is controlled by the Wireless Zero Configuration.

UseUtility2=Do you want to use the utility?

UseUtility3=If you want to use the utility, please turn off it from Wireless Network Connection Properties.



NoAdapter=The adapter is not present.

RemoveProf=Really remove "%s" ?

OverwriteProf=A profile with the name " %s " already exists.\nReplace it?



ErEmyProfName=Profile Name can't be empty!

ErSysProfName=This profile name is used by the system. Please enter a different name.

ErSamProfName=%s already exists. Please enter another name.

ErEmySSID=SSID can't be empty!

ErPassphrase=Passphrase should be between 8 to 63 characters in ASCII format.

ErPassphraseHex=Passphrase should be between 64 hex digits.

ErEmyUser=Login name can't be empty!

ErEmyPw=Password can't be empty!

ErMyCert=You must specify a Certificate.

ErNoSelBand=No wireles mode was selected!\nAt least one wireles mode must be selected.

ErIllegalChar=The specified name contains illegal characters.

ErAPSSID=You should enter a SSID name.



ErWEP64=The length of Key should be 5 or 10. Please re-enter Key.

ErWEP128=The length of Key should be 13 or 26. Please re-enter Key.

ErWEP152=The length of Key should be 16 or 32. Please re-enter Key.

ErWEP256=The length of Key should be 29 or 58. Please re-enter Key.

ErHex64=Shared key should be 10 hexadecimal digists. Please re-enter Key.

ErHex128=Shared key should be 26 hexadecimal digists. Please re-enter Key.

ErHex152=Shared key should be 32 hexadecimal digists. Please re-enter Key.

ErHex256=Shared key should be 58 hexadecimal digists. Please re-enter Key.



[Common]

Unknow=N/A

None=None

Auto=Auto

NotUse=Not Use

Scanning=Scanning

TrustAny=<Trust any installed CA>

Nobridge=No bridge

Enabled=Enabled

Disabled=Disabled

Signal=Signal

Quality=Quality



dBm=dBm

Kbps=Kbps

Mbps=Mbps

GHz=GHz



Connecting=Connecting...

Connected=Connected

DisConnected=Disconnected



SignalNull=No Signal

SignalPoor=Poor

SignalGood=Good

SignalVeryGood=Very Good

SignalExcellent=Excellent



Infrastructure=Infrastructure

AdHoc=Ad-Hoc



802B=802.11b

802G=802.11g

802N=802.11n

802A=802.11a



802G_Trb=802.11g Turbo

802A_Trb=802.11a Turbo



Encrypt_None=Disabled

Encrypt_WEP=WEP

Encrypt_WPA_PSK=WPA-PSK

Encrypt_WPA=WPA

Encrypt_Radius=802.1x

Encrypt_LEAP=LEAP



Encrypt_WPA2_PSK=WPA2-PSK

Encrypt_WPA2=WPA2

Encrypt_WPA_WPA2_PSK=WPA-PSK/WPA2-PSK

Encrypt_WPA_WPA2=WPA/WPA2



AuthModeOpen=Open

AuthModeShare=Shared

AuthModeAuto=Auto Switch

AuthModeWPA=WPA

AuthModeWPAPSK=WPA-PSK

AuthModeWPANone=WPA-NONE

AuthModeWPA2=WPA2

AuthModeWPA2PSK=WPA2-PSK



WEP_64=64 Bits

WEP_128=128 Bits

WEP_152=152 Bits

WEP_256=256 Bits



WPA_TKIP=TKIP

WPA_AES=AES



Dot1xAuthen_None=None

Dot1xAuthen_MD5=MD5

Dot1xAuthen_LEAP=LEAP

Dot1xAuthen_TLS=TLS

Dot1xAuthen_TTLS=TTLS

Dot1xAuthen_PEAP=PEAP



EAP_GTC=GTC

EAP_PAP=PAP

EAP_CHAP=CHAP

EAP_MSCHAP=MS-CHAP

EAP_MSCHAP_2=MS-CHAP V2



PowSaveNo=Continuous Access Mode

PowSaveMax=Maximum Power Saving

PowSaveFast=Fast Power Saving



PowerLv0=High

PowerLv1=Medium-High

PowerLv2=Medium-Low

PowerLv3=Low



PreambleLong=Long

PreambleShort=Short

PreambleAuto=Auto



ChWidth2=20

ChWidth2_4=20-40
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 1.35