[Utility] AppTitle=TEW-621PC Wireless Client Utility MsgTitle=TEW-621PC Wireless Client Utility ProductName=TEW-621PC Wireless Client Utility Copyright1=Copyright(C) 2006 TRENDnet. Copyright2=All rights reserved. WEB= StrAdHocG=2.4 GHz [FormMain] LbOperateMode=Mode: StationMode=Station Mode SoftAPMode=Access Point Mode LbInfo= LbSurvey= LbProfile= LbAPInfo=Link Information LbAPCfg=Configuration LbAPFilter=MAC Filter [FormAbout] LbDriverVer=Driver Version: LbUtilityVer=Utility Version: LbMAC=MAC Address: [FrameInfo] GBoxStatus=Wireless Network Status LbProfile=Profile Name: LbSSID=SSID: LbStatus=Link Status: LbNetType=Network Type: LbWlMode=Wireless Mode: LbChannel=Channel: LbTxRate=Transmit Rate: LbBSSID=AP MAC Address: LbSignal=Signal Strength: GBoxSecurity=Security Status LbSecurity=Security: LbAuthen=Authentication: GBoxIP=TCP/IP Status LbIPAddr=IP Address: LbIPMask=Subnet Mask: LbGateway=Gateway: LbDNS=DNS Server: GBoxAntenna=Smart Antenna Status LbAlgState=Algorithm State: LbRemain=Beacons Remaining: LbRssi=Last Beacon RSSI: LbAntennaMode=Antenna Mode: AlgState1=STARTUP AlgState2=INITIAL_SCAN AlgState3=SUSTAINED_USE AlgState4=PERIODIC_RESCAN LbLeft=Left LbOmni=Omni LbRight=Right GBoxChannel=Channel Status LbCtrlCh=Control Channel: LbExCh=Extension Channel: LbChWidth=Channel Width: [FrameSurvey] GBoxSurvey=Available Networks PlSearch=Searching... LvSite_Col0= LvSite_Col1=SSID LvSite_Col2=Mode LvSite_Col3=Ch LvSite_Col4=Signal LvSite_Col5=Security LvSite_Col6=BSSID [FrameProfile] GBoxProfile=Profile List LvProf_Col0= LvProf_Col1=Name LvProf_Col2=SSID GBoxInfo=Profile Information LbProfile=Profile Name: LbSSID=SSID: LbNetType=Network Type: LbChannel=Channel LbSecurity=Security LbAuthen=Authentication: LbEncryption=Encryption: [FrameAPInfo] GBoxStatus=WLAN Status LbSSID=SSID: LbWlMode=Wireless Mode: LbChannel=Current Channel: LbPower=Output Power: GBoxSecurity=Security Status LbSecurity=Security: LbAuthen=Authentication GBoxIP=TCP/IP Status LbIPAddr=IP Address: LbIPMask=Subnet Mask: LbGateway=Gateway: LbDNS=DNS Server: GBoxMAC=Association List LvSite_Col0= LvSite_Col1=Station MAC Address [FrameAPCfg] GBoxWireless=Wireless Settings LbSSID=SSID: ChkSSID=Hide SSID LbWlMode=Wireless Mode: LbChannel=Channel: LbPower=Tx Power: LbPreamble=Preamble: GBoxBridge=Bridge Adapter GBoxSecurity=WLAN Security Configuration LbWEP=WEP: LbAuthen=Authentication: LbDefKey=Default Key: LbPhrase=Passphrase LbKey1=Key 1: LbKey2=Key 2: LbKey3=Key 3: LbKey4=Key 4: [FrameAPFilter] LbType=Filter Type: GBoxMAC=Filter MAC Address Disable=Disable Accept=Accept Reject=Reject [FrameNetType] GBoxGeneral=General Connection Settings LbProfile=Profile Name: LbSSID=SSID: LbNetType=Network Type: GBoxAdHoc=Ad-Hoc Mode Settings LbWlMode=Wireless Mode: LbChannel=Channel: [FrameAdvSet] GBoxAdvance=Advanced Settings LbPower=Power Save Mode: LbPreamble=802.11b Preamble: LbRTS=RTS Threshold: LbFRAG=FRAG Threshold: LblRTS=(0 - 2347) LblFRAG=(256 - 2346) ChkQoS=QoS GBoxWlMode=Wireless Mode ChkSuper=Super Mode [FrameSecurity] GBoxSecurity=Wireless Security LbSecurity=Security: [FrameWEP] GBoxWEP=Security Settings LbWEP=WEP: LbAuthen=Authentication: LbDefKey=Default Key: LbPhrase=Passphrase: LbKey1=Key 1: LbKey2=Key 2: LbKey3=Key 3: LbKey4=Key 4: [FrameWPAPSK] GBoxWPAPSK=Security Settings LbPhrase=Passphrase: LbEncryption=Encryption: [FrameDot11] GBoxDot11=Security Settings LbAuthen=Authentication: LbUser=User Name: LbPasswd=Password: LbMyCert=Certificate: LbServerCA=Server CA: ChkServerCA=Validate server certificate LbInner=Inner Authentication: LbEncryption=Encryption: [FrameConfirm] GBoxConfirm=Wireless Settings LbProfile=Profile Name: LbSSID=SSID: LbNetType=Network Type: LbWlMode=Wireless Mode: GBoxSecurity=Security Settings LbChannel=Channel: LbSecurity=Security: LbAuthen=Authentication: LbEncryption=Encryption: [FormSiteSelect] GBoxSurvey=Available Networks PlSearch=Searching... LvSite_Col0= LvSite_Col1=SSID LvSite_Col2=Mode LvSite_Col3=Ch LvSite_Col4=Signal LvSite_Col5=Security LvSite_Col6=BSSID [Message] ErAPSSID=You should enter a SSID name. ErWEP64=The length of Key should be 5 or 10. Please re-enter Key. ErWEP128=The length of Key should be 13 or 26. Please re-enter Key. ErWEP152=The length of Key should be 16 or 32. Please re-enter Key. ErWEP256=The length of Key should be 29 or 58. Please re-enter Key. ErHex64=Shared key should be 10 hexadecimal digists. Please re-enter Key. ErHex128=Shared key should be 26 hexadecimal digists. Please re-enter Key. ErHex152=Shared key should be 32 hexadecimal digists. Please re-enter Key. ErHex256=Shared key should be 58 hexadecimal digists. Please re-enter Key. ErEmyProfName=Profile Name can't be empty! ErSysProfName=This profile name is used by the system. Please enter a different name. ErSamProfName=%s already exists. Please enter another name. ErEmySSID=SSID can't be empty! ErPassphrase=Passphrase should be between 8 to 63 characters in ASCII format. ErEmyUser=Login name can't be empty! ErEmyPw=Password can't be empty! ErMyCert=You must specify a Certificate. ErNoSelBand=No wireles mode was selected!\nAt least one wireles mode must be selected. ErIllegalChar=The specified name contains illegal characters. RemoveProf=Really remove " %s" ? OverwriteProf=A profile with the name " %s " already exists.\nReplace it? UseWZC1=The adapter is controlled by the utility. UseWZC2=Do you want to use the Wireless Zero Configuration? UseUtility1=The adapter is controlled by the Wireless Zero Configuration. UseUtility2=Do you want to use the utility? UseUtility3=If you want to use the utility, please turn off it from Wireless Network Connection Properties. NoAdapter=The adapter is not present. [Menu] MenuAbout=About MenuOpen=Open MenuClose=Exit [BtnCaption] BtnOk=OK BtnCancel=Cancel BtnYes=Yes BtnNo=No BtnApply=Apply BtnRefresh=Refresh BtnConnect=Connect BtnAdd=Add BtnEdit=Edit BtnDelete=Delete BtnReset=Reset BtnNext=Next BtnBack=Back BtnActNow=Activate Now BtnActLater=Activate Later BtnBrowse=Browse BtnSelect=Select BtnImport=Import BtnExport=Export [Common] Unknow=N/A dBm=dBm Kbps=Kbps Mbps=Mbps GHz=GHz Auto=Auto Scanning=Scanning TrustAny=<Trust any installed CA> None=None NotUse=Not Use Nobridge=No bridge Enabled=Enabled Disabled=Disabled Signal=Signal Quality=Quality Connecting=Connecting... Connected=Connected DisConnected=Disconnected SignalNull=No Signal SignalPoor=Poor SignalGood=Good SignalVeryGood=Very Good SignalExcellent=Excellent Authenticating=Authenticating... AuthenRetry=Authentication failed, retrying... AuthenFail=Authentication failed Authenticated=Authenticated Infrastructure=Infrastructure AdHoc=Ad-Hoc Encrypt_None=Disabled Encrypt_WEP=WEP Encrypt_WPA_PSK=WPA-PSK Encrypt_WPA=WPA Encrypt_Radius=802.1x Encrypt_LEAP=LEAP Encrypt_WPA2_PSK=WPA2-PSK Encrypt_WPA2=WPA2 Encrypt_WPA_WPA2_PSK=WPA-PSK/WPA2-PSK Encrypt_WPA_WPA2=WPA/WPA2 Authen_None=None Authen_MD5=MD5 Authen_LEAP=LEAP Authen_TLS=TLS Authen_TTLS=TTLS Authen_PEAP=PEAP WEP_64=64 Bits WEP_128=128 Bits WEP_152=152 Bits WEP_256=256 Bits WPA_TKIP=TKIP WPA_AES=AES AuthModeOpen=Open AuthModeShare=Shared AuthModeAuto=Auto Switch AuthModeWPA=WPA EAP_GTC=GTC EAP_PAP=PAP EAP_CHAP=CHAP EAP_MSCHAP=MS-CHAP EAP_MSCHAP_2=MS-CHAP V2 Drv_Encrypt_None=Not Using WEP Drv_Encrypt_WEP=WEP Drv_Encrypt_AES=AES Drv_Encrypt_CKIP=CKIP Drv_Encrypt_TKIP=TKIP 802B=802.11b 802G=802.11g 802A=802.11a 802N=802.11n 802G_Trb=802.11g Turbo 802A_Trb=802.11a Turbo PowSaveNo=Continuous Access Mode PowSaveMax=Maximum Power Saving PowSaveFast=Fast Power Saving PreambleLong=Long PreambleShort=Short PreambleAuto=Auto RoamNo=Do not consider roaming RoamDef=Default roaming mode RoamOpt=Optimized in roaming PowerLv0=High PowerLv1=Medium-High PowerLv2=Medium-Low PowerLv3=Low ChWidth2=20 ChWidth2_4=20-40Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.