1. Utility_Driver_TEW-623PI_70308.zip Driver
2. String.ini File Contents

String.ini Driver File Contents (Utility_Driver_TEW-623PI_70308.zip)

[Utility]
AppTitle=TEW-623PI Wireless Client Utility
MsgTitle=TEW-623PI Wireless Client Utility
ProductName=TEW-623PI Wireless Client Utility
Copyright1=Copyright(C) 2006 TRENDnet.
Copyright2=All rights reserved.
WEB=
StrAdHocG=2.4 GHz

[FormMain]
LbOperateMode=Mode:
StationMode=Station Mode
SoftAPMode=Access Point Mode
LbInfo=
LbSurvey=
LbProfile=
LbAPInfo=Link Information
LbAPCfg=Configuration
LbAPFilter=MAC Filter

[FormAbout]
LbDriverVer=Driver Version:
LbUtilityVer=Utility Version:
LbMAC=MAC Address:

[FrameInfo]
GBoxStatus=Wireless Network Status
LbProfile=Profile Name:
LbSSID=SSID:
LbStatus=Link Status:
LbNetType=Network Type:
LbWlMode=Wireless Mode:
LbChannel=Channel:
LbTxRate=Transmit Rate:
LbBSSID=AP MAC Address:
LbSignal=Signal Strength:

GBoxSecurity=Security Status
LbSecurity=Security:
LbAuthen=Authentication:

GBoxIP=TCP/IP Status
LbIPAddr=IP Address:
LbIPMask=Subnet Mask:
LbGateway=Gateway:
LbDNS=DNS Server:

GBoxAntenna=Smart Antenna Status
LbAlgState=Algorithm State:
LbRemain=Beacons Remaining:
LbRssi=Last Beacon RSSI:
LbAntennaMode=Antenna Mode:

AlgState1=STARTUP
AlgState2=INITIAL_SCAN
AlgState3=SUSTAINED_USE
AlgState4=PERIODIC_RESCAN

LbLeft=Left
LbOmni=Omni
LbRight=Right

GBoxChannel=Channel Status
LbCtrlCh=Control Channel:
LbExCh=Extension Channel:
LbChWidth=Channel Width:

[FrameSurvey]
GBoxSurvey=Available Networks
PlSearch=Searching...
LvSite_Col0=
LvSite_Col1=SSID
LvSite_Col2=Mode
LvSite_Col3=Ch
LvSite_Col4=Signal
LvSite_Col5=Security
LvSite_Col6=BSSID

[FrameProfile]
GBoxProfile=Profile List
LvProf_Col0=
LvProf_Col1=Name
LvProf_Col2=SSID
GBoxInfo=Profile Information
LbProfile=Profile Name:
LbSSID=SSID:
LbNetType=Network Type:
LbChannel=Channel
LbSecurity=Security
LbAuthen=Authentication:
LbEncryption=Encryption:

[FrameAPInfo]
GBoxStatus=WLAN Status
LbSSID=SSID:
LbWlMode=Wireless Mode:
LbChannel=Current Channel:
LbPower=Output Power:
GBoxSecurity=Security Status
LbSecurity=Security:
LbAuthen=Authentication
GBoxIP=TCP/IP Status
LbIPAddr=IP Address:
LbIPMask=Subnet Mask:
LbGateway=Gateway:
LbDNS=DNS Server:

GBoxMAC=Association List
LvSite_Col0=
LvSite_Col1=Station MAC Address

[FrameAPCfg]
GBoxWireless=Wireless Settings
LbSSID=SSID:
ChkSSID=Hide SSID
LbWlMode=Wireless Mode:
LbChannel=Channel:
LbPower=Tx Power:
LbPreamble=Preamble:
GBoxBridge=Bridge Adapter
GBoxSecurity=WLAN Security Configuration
LbWEP=WEP:
LbAuthen=Authentication:
LbDefKey=Default Key:
LbPhrase=Passphrase
LbKey1=Key 1:
LbKey2=Key 2:
LbKey3=Key 3:
LbKey4=Key 4:

[FrameAPFilter]
LbType=Filter Type:
GBoxMAC=Filter MAC Address
Disable=Disable
Accept=Accept
Reject=Reject

[FrameNetType]
GBoxGeneral=General Connection Settings
LbProfile=Profile Name:
LbSSID=SSID:
LbNetType=Network Type:
GBoxAdHoc=Ad-Hoc Mode Settings
LbWlMode=Wireless Mode:
LbChannel=Channel:

[FrameAdvSet]
GBoxAdvance=Advanced Settings
LbPower=Power Save Mode:
LbPreamble=802.11b Preamble:
LbRTS=RTS Threshold:
LbFRAG=FRAG Threshold:
LblRTS=(0 - 2347)
LblFRAG=(256 - 2346)
ChkQoS=QoS

GBoxWlMode=Wireless Mode
ChkSuper=Super Mode

[FrameSecurity]
GBoxSecurity=Wireless Security
LbSecurity=Security:

[FrameWEP]
GBoxWEP=Security Settings
LbWEP=WEP:
LbAuthen=Authentication:
LbDefKey=Default Key:
LbPhrase=Passphrase:
LbKey1=Key 1:
LbKey2=Key 2:
LbKey3=Key 3:
LbKey4=Key 4:

[FrameWPAPSK]
GBoxWPAPSK=Security Settings
LbPhrase=Passphrase:
LbEncryption=Encryption:

[FrameDot11]
GBoxDot11=Security Settings
LbAuthen=Authentication:
LbUser=User Name:
LbPasswd=Password:
LbMyCert=Certificate:
LbServerCA=Server CA:
ChkServerCA=Validate server certificate
LbInner=Inner Authentication:
LbEncryption=Encryption:

[FrameConfirm]
GBoxConfirm=Wireless Settings
LbProfile=Profile Name:
LbSSID=SSID:
LbNetType=Network Type:
LbWlMode=Wireless Mode:

GBoxSecurity=Security Settings
LbChannel=Channel:
LbSecurity=Security:
LbAuthen=Authentication:
LbEncryption=Encryption:

[FormSiteSelect]
GBoxSurvey=Available Networks
PlSearch=Searching...
LvSite_Col0=
LvSite_Col1=SSID
LvSite_Col2=Mode
LvSite_Col3=Ch
LvSite_Col4=Signal
LvSite_Col5=Security
LvSite_Col6=BSSID

[Message]
ErAPSSID=You should enter a SSID name.
ErWEP64=The length of Key should be 5 or 10. Please re-enter Key.
ErWEP128=The length of Key should be 13 or 26. Please re-enter Key.
ErWEP152=The length of Key should be 16 or 32. Please re-enter Key.
ErWEP256=The length of Key should be 29 or 58. Please re-enter Key.
ErHex64=Shared key should be 10 hexadecimal digists. Please re-enter Key.
ErHex128=Shared key should be 26 hexadecimal digists. Please re-enter Key.
ErHex152=Shared key should be 32 hexadecimal digists. Please re-enter Key.
ErHex256=Shared key should be 58 hexadecimal digists. Please re-enter Key.

ErEmyProfName=Profile Name can't be empty!
ErSysProfName=This profile name is used by the system. Please enter a different name.
ErSamProfName=%s already exists. Please enter another name.
ErEmySSID=SSID can't be empty!
ErPassphrase=Passphrase should be between 8 to 63 characters in ASCII format.
ErEmyUser=Login name can't be empty!
ErEmyPw=Password can't be empty!
ErMyCert=You must specify a Certificate.
ErNoSelBand=No wireles mode was selected!\nAt least one wireles mode must be selected.
ErIllegalChar=The specified name contains illegal characters.

RemoveProf=Really remove " %s" ?
OverwriteProf=A profile with the name " %s " already exists.\nReplace it?

UseWZC1=The adapter is controlled by the utility.
UseWZC2=Do you want to use the Wireless Zero Configuration?
UseUtility1=The adapter is controlled by the Wireless Zero Configuration.
UseUtility2=Do you want to use the utility?
UseUtility3=If you want to use the utility, please turn off it from Wireless Network Connection Properties.

NoAdapter=The adapter is not present.

[Menu]
MenuAbout=About
MenuOpen=Open
MenuClose=Exit


[BtnCaption]
BtnOk=OK
BtnCancel=Cancel
BtnYes=Yes
BtnNo=No
BtnApply=Apply
BtnRefresh=Refresh
BtnConnect=Connect
BtnAdd=Add
BtnEdit=Edit
BtnDelete=Delete
BtnReset=Reset
BtnNext=Next
BtnBack=Back
BtnActNow=Activate Now
BtnActLater=Activate Later
BtnBrowse=Browse
BtnSelect=Select
BtnImport=Import
BtnExport=Export

[Common]
Unknow=N/A
dBm=dBm
Kbps=Kbps
Mbps=Mbps
GHz=GHz
Auto=Auto
Scanning=Scanning
TrustAny=<Trust any installed CA>
None=None
NotUse=Not Use
Nobridge=No bridge

Enabled=Enabled
Disabled=Disabled
Signal=Signal
Quality=Quality

Connecting=Connecting...
Connected=Connected
DisConnected=Disconnected

SignalNull=No Signal
SignalPoor=Poor
SignalGood=Good
SignalVeryGood=Very Good
SignalExcellent=Excellent

Authenticating=Authenticating...
AuthenRetry=Authentication failed, retrying...
AuthenFail=Authentication failed
Authenticated=Authenticated

Infrastructure=Infrastructure
AdHoc=Ad-Hoc

Encrypt_None=Disabled
Encrypt_WEP=WEP
Encrypt_WPA_PSK=WPA-PSK
Encrypt_WPA=WPA
Encrypt_Radius=802.1x
Encrypt_LEAP=LEAP

Encrypt_WPA2_PSK=WPA2-PSK
Encrypt_WPA2=WPA2
Encrypt_WPA_WPA2_PSK=WPA-PSK/WPA2-PSK
Encrypt_WPA_WPA2=WPA/WPA2

Authen_None=None
Authen_MD5=MD5
Authen_LEAP=LEAP
Authen_TLS=TLS
Authen_TTLS=TTLS
Authen_PEAP=PEAP

WEP_64=64 Bits
WEP_128=128 Bits
WEP_152=152 Bits
WEP_256=256 Bits

WPA_TKIP=TKIP
WPA_AES=AES

AuthModeOpen=Open
AuthModeShare=Shared
AuthModeAuto=Auto Switch
AuthModeWPA=WPA

EAP_GTC=GTC
EAP_PAP=PAP
EAP_CHAP=CHAP
EAP_MSCHAP=MS-CHAP
EAP_MSCHAP_2=MS-CHAP V2

Drv_Encrypt_None=Not Using WEP
Drv_Encrypt_WEP=WEP
Drv_Encrypt_AES=AES
Drv_Encrypt_CKIP=CKIP
Drv_Encrypt_TKIP=TKIP

802B=802.11b
802G=802.11g
802A=802.11a
802N=802.11n
802G_Trb=802.11g Turbo
802A_Trb=802.11a Turbo

PowSaveNo=Continuous Access Mode
PowSaveMax=Maximum Power Saving
PowSaveFast=Fast Power Saving

PreambleLong=Long
PreambleShort=Short
PreambleAuto=Auto

RoamNo=Do not consider roaming
RoamDef=Default roaming mode
RoamOpt=Optimized in roaming

PowerLv0=High
PowerLv1=Medium-High
PowerLv2=Medium-Low
PowerLv3=Low

ChWidth2=20
ChWidth2_4=20-40