TEW-631BRPv2 Firmware Release Note TEW-631BRP_v1.0.3.7 2008/1/16 1. Add Syslog function TEW-631BRP_v1.0.3.5 2007/10/31 1. Set the debouncer time to 5 seconds. 2. Add blinking WPS led after press WPS button until the time expire to inform user the WPS is ready to run. TEW-631BRP_v1.0.3.4 2007/10/22 1. Set AES only for WPS in order to improve the issue what the WPS is hard to connect to client TEW-631BRP_v1.0.3.3 2007/09/28 1. Enable the WPS by default TEW-631BRP_v1.0.3.2 2007/09/28 1. Porting from SDK7.4 to SDK7.4.1 2. Fix low throughput for WDS link. TEW-631BRP_v1.0.3.1 2007/09/26 1. Set the default setting of wifi simple configure to disable. 2. Fix blank item on TRENDnet Router Setup utility. 3. Set the default cwm mode to HT20/HT40. TEW-631BRP_v1.0.3.0 2007/08/17 1. Fix: Only TKIP on WPA-Personal or WPA-Enterprise security that will change to G/B mode.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.