; Rushmore ; Customization Parameters ; test1.ini ; Wed Jan 22 17:55:26 2003 ConfigEditVersion=1.0.0.31 ; ******* Install Wizard Configuration ; NOTE Always list Install Wizard configuration at beginning of this file. ; Wizard title displayed in the Install Wizard Title bar. WizardTitle=Michelangelo USB ADSL Wizard ; Filename to store install log information LogFile=CnxDslWz.log ; Folder name to store product files. Stored in n:\Program Files\xxx where xxx is ProgramFilesFolder BaseFolder=Michelangelo USB ADSL Wizard ; SHORTCUTS: (Values are in Decimal) ; 1 = Start Menu ; 2 = Start Menu\Programs ; 4 = Start Menu\Programs\Startup ; 8 = Start Menu\Programs\xxx where xxx" = ShortcutFolder ; 16 = Desktop ; 32 = Taskbar ; Wizard shortcut in "Start Menu\Programs\AccessRunner DSL" and Desktop WizardShortcut=16 WizardShortcutName=Michelangelo USB ADSL Wizard ; Wizard will display a splash screen when first executed. ; 0 = Wizard will display a splash screen ; 1 = Wizard will not display a splash screen DisableWizardSplashScreen=0 ; Control of first screen display after optional Splash screen (controlled by WizardDisplaysSplash). ; 1 = Wizard displays the install screen first (Radio button selection to install product) ; 2 = Wizard displays the provider screen first (List of providers, listed in INS files, is displayed) ; 4 = Wizard displays the bitmapped protocol selection screen first. (One BMP button for each ; protocol) WizardMode=1 ; Wizard allows user to configure ADSL parameters (also enabled with ALT-A) ; 0 = User cannot configure ADSL parameters with Install Wizard ; 1 = User can configure ADSL parameters with Install Wizard ; 2 = Advanced Mode - User is forced to view/edit parameters WizardDisplayMode=0 ; DUN connection name can be edited by user with Intall Wizard. ; 0 = User cannot edit the connection name ; 1 = User can edit the connection name DisplayConnectionName=0 ; DUN connection name for the desktop shortcut. ConnectoidName=Michelangelo USB ADSL ; Wizard screens are not displayed when executed from Windows Add/Remove Programs ; 0 = Wizard allows user to uninstall product or product and Wizard configuration ; 1 = Wizard allows user to uninstall product only. No Wizard screens are displayed WizardFastUninstall=0 ; Display the TaskBar Application icon in the TrayIcon area. (Bitmapped) ; 0 = Retail Mode - No rates displayed, toolbox button enabled by ALT-A ; 1 = Retail Mode - Rates are displayed, toolbox button enabled by ALT-A ; 2 = Retail Mode with Toolbox Button - Toolbox button will expand the display to provide icons for ; AutoLog Tool and the DSL Wizard TrayIconDisplayMode=0 ; Display a Summary Screen before installation and configuration ; 0 = Do not display the protocol setup summary ; 1 = Display the protocol setup summary DisplaySummaryScreen=0 ; Authorization is not required for changes ; 0 = Authorization screen is displayed ; 1 = Authorization screen is not displayed BypassAuthorization=0 ; Advanced Tabs Display Order ; Arrange the tab display order (lowest number is displayed first) ; 0 = Tab will not be displayed ; 1 - 9 = order number (one value per tab) ; IpAddressSelectionScreen RFC1483 and RFC1577 ONLY ; DnsSelectionScreen RFC1483 and RFC1577 ONLY ; NetworkIdScreen RFC1483 and RFC1577 ONLY ; DefaultGatewayScreen RFC1483 and RFC1577 ONLY ; UserNamePasswordSelectionScreen RFC2364 ONLY ProtocolSelectionScreen=1 ModulationSelectionScreen=2 PcrSelectionScreen=3 VpiVciSelectionScreen=4 IpAddressSelectionScreen=5 NetworkIdScreen=6 DnsSelectionScreen=7 DefaultGatewayScreen=8 UserNameSelectionScreen=9 ; Reboot prompt control after successful install/configure ; 0 = Wizard prompts for a reboot only when necessary ; 1 = Display "Finished" screen & then prompt for a reboot after a successful install/uninstall ; 2 = Always prompt for a reboot after a successful install/uninstall, skipping Finish screen. RebootPrompt=0 ; The install CD image is copied to this location during installation and configuration. No actions ; are taken if the path is empty. LocalCdImagePath="" ; ******* Overall Product Configuration [COMMON] ; A custom version field can be displayed on the control panel General tab and the "About" dialog ; box in the task bar application. The string can contain any displayable characters. If a custom ; version is not desired, set CustomerVersion="". CustomerVersion="" ; Set "Provider" field that is displayed in the Driver-Properties tab in Windows Device Manager CompanyName=digicom ; Set the Provider company name LongCompanyName=digicom ; Set the product name displayed by Windows Control Panel (32 characters max length). ShortProductName=Michelangelo USB ADSL ; Set the distribution Media name DiskName=Michelangelo USB ADSL Installation Disk ; Set the "Program Files\" sub folder name where all of the applications will be stored. AppSubfolder=digicom\Michelangelo USB ADSL ; Set Control panel definition for the initial display as well as any tabs that are enabled with Hot ; Keys. ; Valid Values (bitmapped) ; Do Not Display any tabs = 0 ; HAL Diagnostics tab = 0x000001 ; ATM Statistics = 0x000002 ; Connection Tab = 0x000010 ; Protocol Setup Tab = 0x000040 ; AAL Statistics = 0x000080 ; Line Setup Tab = 0x000100 ; Advanced General Tab = 0x000200 ; AAL Link Statistics Tab = 0x000400 ; ATM Link Statistics Tab = 0x000800 ; Physical Layer Tab = 0x001000 ; AutoLog Tool Tab = 0x002000 ; Retail General Tab = 0x008000 ; ATM BERT Diagnostics Tab =0x010000 ; ATM OAM Loopback Tab = 0x080000 ; USB Options Tab = 0x100000 ; All values are in hexadecimal. Do not add 0x prefix. ; Example AltATabs=1250 would cause the Physical Layer, Advanced General, Protocol Setup, and ; Connection tabs to be displayed when the user types ALT-A. ; Define the tabs that will be displayed when the control panel is first executed. InitialTabs=8000 ; Hot Key enable/disable ; 0 = No Hot key support ; 1 = ALT-A key support is enabled ; 2 = ALT-A key requires a password ; 4 = ALT-C key support is enabled ; 8 = ALT-C key requires a password ; 16 = ALT-P key support is enabled ; 32 = ALT-P key requires a password AdvancedKeys=85 ; Define the tabs that will be displayed when the user types ALT-A. AltATabs=E50 ; Define the tabs that will be displayed when the user types ALT-C. AltCTabs=8140 ; Define the tabs that will be displayed when the user types ALT-P. AltPTabs=81F50 ; Control Panel Modes ; Valid Values (bitmapped) ; 0 = Display rate information on the Control panel tabs. No Advanced button is displayed. ; 1 = Do not display rate information on the Control panel tabs. ; 16 = Display Advanced button on the Control Panel General Tab that enables ALT-A tabs when pressed. AdvancedMode=0 ; Folder name to store shortcuts. Start Menu\Programs\xxx where xxx" = ShortcutFolder ShortcutFolderName=Michelangelo USB ADSL ; SHORTCUTS: (Values are in Hexadecimal) ; 1 = "Start Menu" ; 2 = "Start Menu\Programs" ; 4 = "Start Menu\Programs\Startup" ; 8 = "Start Menu\Programs\xxx where xxx" = ShortcutFolder ; 10 = Desktop ; 20 = Taskbar ; DUN connectoid shortcut in "Start Menu\Programs\AccessRunner DSL" and on Desktop ConnectoidShortcutLocations=18 ; DUN description of the desktop shortcut. ConnectoidShortcutDescription=Michelangelo USB ADSL ; Control Panel shortcut in "Start Menu\Programs\AccessRunner DSL" and Desktop ControlPanelAppletShortcutLocations=18 ControlPanelAppletShortcutDescription=Michelangelo USB ADSL Control Panel ; AutoLog Tool shortcut in "Start Menu\Programs\AccessRunner DSL" AutologShortcutLocations=8 AutologShortcutDescription=Michelangelo USB ADSL Autolog ; Task Bar Application shortcut in "Start Menu\Programs\Startup" TaskBarAppShortcutLocations=8 TaskBarAppShortcutDescription=Michelangelo USB ADSL Task Bar ; Task Bar Application title displayed in the Task Bar Application Title bar TaskbarAppTitle=Michelangelo USB ADSL ; Help shortcut in "Start Menu\Programs\AccessRunner DSL" HelpShortcutLocations=8 HelpShortcutDescription=Michelangelo USB ADSL Help ; Uninstall shortcut in "Start Menu\Programs\AccessRunner DSL" UninstallShortcutLocations=8 UninstallShortcutDescription=Uninstall Michelangelo USB ADSL ; DSL Advisor shortcut in "Start Menu\Programs\AccessRunner DSL" and Desktop DslAdvisorShortcutLocations="" DslAdvisorShortcutDescription="" ; Folder name where the ADSL sounds .WAV files are stored. MEDIA_SUBFOLDER=Media ; *** DSL Advisor User Interface Configuration ; DSL Advisor Title that is displayed in bottom task bar Title="" ; DSL Advisor will store test results in this Filename LogFileName="" ; *** DSL Advisor FTP Download Test Configuration ; FTP Download test control ; 0 = DSL Advisor will not perform the data download test ; 1 = DSL Advisor will perform the data download test FtpTestEnabled=0 ; Domain Name used in FTP download test. Domain="" ; Maximum time in milliseconds for the FTP file to download DownloadTime=0 ; FTP address where test file to download is located. FtpSite="" ; Password used to access FTP site. - ConfigEdit will generate an encrypted value based on this one. Password="" ; Phone number used to connect to WAN server during FTP download test PhoneNumber="" ; Filename located on FTP server that will be downloaded for the FTP test. SourceFileName="" ; User name that is used to access FTP site. UserName="" NumberWiringCombos=2 ; ******* Wan ADSL Configuration [WAN] ; Set the description displayed by Windows Device Manager and the applications. DeviceDesc=Michelangelo USB ADSL WAN Adapter ; Set the description displayed in Windows Add/Remove Programs. ProductName=Michelangelo USB ADSL WAN Adapter ; Set Head End (Values are in hexadecimal format). AdslHeadEnd=0 ; Set the Design environment of the DSLAM. ; 0 = Non-Specific ; 1 = No Line Driver (BNA) AdslHeadEndEnvironment=0 ; Set the modulation handshake mode. ; 0 = Try G.HS then ANSI ; 1 = Try ANSI then G.HS ; 2 = G.HS ; 3 = ANSI ; 4 = G.hs, G.dmt Only ; 5 = G.hs, G.lite Only ModulationMode=0 ; Set Autosense Wiring Pair Selection ; 0 = Automatic ; 1 = Line Tip/Ring ; 2 = Line A/A1 ; 3 = Aux Tip/Ring ; 4 = Aux A/A1 AutoSenseWiringSelection=1 ; Set the encapsulation mode. ; 0 = PPP over ATM VXMUX - WAN Only (RFC 2364) ; 1 = PPP over ATM LLC - WAN Only (RFC 2364) ; 2 = Bridged IP over ATM LLCSNAP - LAN Only (RFC 1483) ; 3 = Routed IP over ATM LLCSNAP - LAN Only (RFC 1483) ; 4 = Bridged IP over ATM VCMUX - LAN Only (RFC 1483) ; 5 = Routed IP over ATM VCMUX - LAN Only (RFC 1483) ; 6 = Classical IP over ATM - LAN Only (RFC 1577) ; 7 = Native ATM - WAN or LAN ; 8 = PPP over Ethernet VCMUX (RFC 2516) ; 9 = PPP over Ethernet LLCSNAP (RFC 2516) RfcEncapsulation=0 ; Set Number of seconds that a WAN call disconnect indication to the O/S will be delayed after the ; ADSL line is deactivated. ; Valid values are 0 to 65535 VcDisconnectDelay=30000 ; Set the Windows 9x RAS options. (Values are in hexadecimal). Win9xRasEntryNetProtocols=7 Win9xRasEntryOptions=2218 ; Set the Windows 2000 and Windows XP RAS options. (Values are in hexadecimal). Win2kRasEntryNetProtocols=7 Win2kRasEntryOptions=5010318 ; Enable Persistent Autodial ; 0 = Disabled ; 1 = Enabled PersistentAutodialEnableOnInstall=0 ; Set the VPI and VCI ; The format of VcList = uu vvvv wwww xx yyyy zzzz ; where uu is Vpi(0) 8 bits, stored as hex, delimited by a space ; where vvvv is Vci(0) 16 bits, stored as hex, delimited by a space ; where wwww is Pcr(0) 16 bits, stored as hex, delimited by a space ; xx yyyy zzzz are not used VcList=8 23 0 8 2B 0 ; Maximum Transmission Unit size ; Setting these values to the smallest MTU of your data path will prevent fragmentation from ; occurring. ; Data range: 1 - 1500 (default is 1500). Disabled = -1. IPMTU=-1 ; ADSL Data Pump operation ; These values are obtained from Conexant Systems Inc. AdslOption1=128 AdslOption2=0 AdslOption3=10 AdslOption4=12 AdslOption5=2 AdslOption6=3 AdslOption7=0 AdslOption8=0 AdslOption9=0 AdslOption10=384 AdslOption11=0 AdslOption12=0 AdslOption13=0 AdslOption14=0 AdslOption15=0 AdslOption16=0 AdslOption17=0 AdslOption18=0 AdslOption19=0 AdslOption20=0 ; CRC Error Counter ; If the far-end CRC Error threshold is crossed, then the "far-end CRC Errors" accumulator is ; incremented by this amount. ; For each second where the far-end CRC Error threshold is not crossed, the "far-end CRC Errors" ; accumulator is decremented by one but will never decrement to less than zero. ; Valid values 0 - 100 AdslCRCIncrementFar=0 ; CRC Error Retrain Threshold ; The number of seconds for which the internal "far-end CRC Errors" accumulator is > 0 prior to ; initiation of retrain. A value of 0 disables retrain due to far-end CRCs. ; Valid values 0 - 100 AdslCRCRetrainThresholdFar=0 ; Far End CRC Threshold ; Defines the number of far-end physical layer CRC errors which can occur during a one-second period ; before the "far-end CRC Errors" accumulator is incremented by the value of AdslCRCIncrementFar. ; Valid values 0 - 100 AdslCRCThresholdFar=0 ; Near End CRC Threshold ; Defines the number of near-end physical layer CRC errors that can occur before the Severely ; Errored Second accumulator is incremented. ; Refer to Annex M.1.1.7 of T1.413 for more details. ; Valid values 0 - 100 AdslCRCThresholdNear=14 ; Number of Severly Errored Seconds before Retrain ; Defines the threshold of near-end consecutive Severely Errored Seconds detected prior to the ; initiation of a retrain. ; Refer to Annex M.1.1.7 of T1.413 for more details. ; Valid values 0 - 100 AdslSESRetrainThresholdNear=5 ; Number of SNR Margin Errors before Retrain ; Defines the threshold of consecutive near-end "SNR Margin Errors" detected prior to the initiation ; of a retrain. If equal to 0, no SNR Margin retrain is initiated. ; Valid values 0 - 100 AdslSNRMarRetrainThresholdNear=0 ; SNR Margin Errors ; Defines the threshold of near-end SNR Margin used to detect and accumulate "SNR Margin Errors". ; Each second, the SNR Margin is compared to the threshold value. ; If the SNR Margin is less than the threshold value, then the "SNR Margin Errors" accumulator is ; incremented. If the SNR Margin is equal to or greater than this threshold, the "SNR Margin ; Errors" accumulator is reset to 0. ; Valid values 0 - 63 AdslSNRMarThresholdNear=0 ; Telco ID ; For engineering use only. Do not modify. AdslTelcoId=0 ; AutoSense tone timeout ; Specifies the number of seconds AutoSense will listen for tone on the first iteration. ; Valid values: ; 0 = The AutoSense timeout will default to two seconds ; 1 - 65535 = Number of seconds for AutoSense timeout AutoSenseInitialTimeout=0 ; Enable/Disable of display of extended physical layer statistics in the control panel ; 0 = Disabled ; 1 = Enabled DisplayExtPhysLayerStats=0 ; OAMFaultManagementControl ; Controls behavior of OAM Fault Management processing: ; Bit0: Respond to AIS Cells with RDI (0 = Disable, 1 = Enable) ; Bit1: Respond to CC Cells (0 = Disable, 1 = Enable) OAMFaultManagementControl=3 ; ******* Lan ADSL Configuration [LAN] ; Set the description displayed by Windows Device Manager and the applications. DeviceDesc=Michelangelo USB ADSL LAN Adapter ; Set the description displayed in Windows Add/Remove Programs. ProductName=Michelangelo USB ADSL LAN Adapter ; Enable / Disable of DHCP Proxy function ; 0 = Do not answer first DHCP request if the DSL is not in ShowTime ; 1 = Answer first DHCP request if the DSL is not in ShowTime DhcpProxy=0 ; Enable/Disable of auto DHCP release/renew (Win9x only) ; 0 = Do not request DHCP lease (IP address) to be renewed at showtime ; 1 = Request DHCP lease (IP address) to be renewed at showtime DhcpRenewRequest=0 ; Set Head End (Values are in hexadecimal format). AdslHeadEnd=0 ; Set the Design environment of the DSLAM. ; 0 = Non-Specific ; 1 = No Line Driver (BNA) AdslHeadEndEnvironment=0 ; Set the modulation handshake mode. ; 0 = Try G.HS then ANSI ; 1 = Try ANSI then G.HS ; 2 = G.HS ; 3 = ANSI ; 4 = G.hs, G.dmt Only ; 5 = G.hs, G.lite Only ModulationMode=0 ; Set Autosense Wiring Pair Selection ; 0 = Automatic ; 1 = Line Tip/Ring ; 2 = Line A/A1 ; 3 = Aux Tip/Ring ; 4 = Aux A/A1 AutoSenseWiringSelection=1 ; Set the encapsulation mode. ; 0 = PPP over ATM VXMUX - WAN Only (RFC 2364) ; 1 = PPP over ATM LLC - WAN Only (RFC 2364) ; 2 = Bridged IP over ATM LLCSNAP - LAN Only (RFC 1483) ; 3 = Routed IP over ATM LLCSNAP - LAN Only (RFC 1483) ; 4 = Bridged IP over ATM VCMUX - LAN Only (RFC 1483) ; 5 = Routed IP over ATM VCMUX - LAN Only (RFC 1483) ; 6 = Classical IP over ATM - LAN Only (RFC 1577) ; 7 = Native ATM - WAN or LAN ; 8 = PPP over Ethernet VCMUX (RFC 2516) ; 9 = PPP over Ethernet LLCSNAP (RFC 2516) RfcEncapsulation=2 ; Number of milliseconds that a LAN connect indication to the O/S will be delayed after the ADSL line ; activate indication is received. ; Valid values are 0 to 65535. VcConnectDelay=2000 ; Set the VPI and VCI ; The format of VcList = uu vvvv wwww xx yyyy zzzz ; where uu is Vpi(0) 8 bits, stored as hex, delimited by a space ; where vvvv is Vci(0) 16 bits, stored as hex, delimited by a space ; where wwww is Pcr(0) 16 bits, stored as hex, delimited by a space ; xx yyyy zzzz are not used VcList=8 23 0 8 2B 0 ; ADSL Data Pump operation ; These values are obtained from Conexant Systems Inc. AdslOption1=128 AdslOption2=0 AdslOption3=10 AdslOption4=12 AdslOption5=2 AdslOption6=3 AdslOption7=0 AdslOption8=0 AdslOption9=0 AdslOption10=384 AdslOption11=0 AdslOption12=0 AdslOption13=0 AdslOption14=0 AdslOption15=0 AdslOption16=0 AdslOption17=0 AdslOption18=0 AdslOption19=0 AdslOption20=0 ; CRC Error Counter ; If the far-end CRC Error threshold is crossed, then the "far-end CRC Errors" accumulator is ; incremented by this amount. ; For each second where the far-end CRC Error threshold is not crossed, the "far-end CRC Errors" ; accumulator is decremented by one but will never decrement to less than zero. ; Valid values 0 - 100 AdslCRCIncrementFar=0 ; CRC Error Retrain Threshold ; The number of seconds for which the internal "far-end CRC Errors" accumulator is > 0 prior to ; initiation of retrain. A value of 0 disables retrain due to far-end CRCs. ; Valid values 0 - 100 AdslCRCRetrainThresholdFar=0 ; Far End CRC Threshold ; Defines the number of far-end physical layer CRC errors which can occur during a one-second period ; before the "far-end CRC Errors" accumulator is incremented by the value of AdslCRCIncrementFar. ; Valid values 0 - 100 AdslCRCThresholdFar=0 ; Near End CRC Threshold ; Defines the number of near-end physical layer CRC errors that can occur before the Severely ; Errored Second accumulator is incremented. ; Refer to Annex M.1.1.7 of T1.413 for more details. ; Valid values 0 - 100 AdslCRCThresholdNear=14 ; Number of Severly Errored Seconds before Retrain ; Defines the threshold of near-end consecutive Severely Errored Seconds detected prior to the ; initiation of a retrain. ; Refer to Annex M.1.1.7 of T1.413 for more details. ; Valid values 0 - 100 AdslSESRetrainThresholdNear=5 ; Number of SNR Margin Errors before Retrain ; Defines the threshold of consecutive near-end "SNR Margin Errors" detected prior to the initiation ; of a retrain. If equal to 0, no SNR Margin retrain is initiated. ; Valid values 0 - 100 AdslSNRMarRetrainThresholdNear=0 ; SNR Margin Errors ; Defines the threshold of near-end SNR Margin used to detect and accumulate "SNR Margin Errors". ; Each second, the SNR Margin is compared to the threshold value. ; If the SNR Margin is less than the threshold value, then the "SNR Margin Errors" accumulator is ; incremented. If the SNR Margin is equal to or greater than this threshold, the "SNR Margin ; Errors" accumulator is reset to 0. ; Valid values 0 - 63 AdslSNRMarThresholdNear=0 ; Telco ID ; For engineering use only. Do not modify. AdslTelcoId=0 ; AutoSense tone timeout ; Specifies the number of seconds AutoSense will listen for tone on the first iteration. ; Valid values: ; 0 = The AutoSense timeout will default to two seconds ; 1 - 65535 = Number of seconds for AutoSense timeout AutoSenseInitialTimeout=0 ; Enable/Disable of display of extended physical layer statistics in the control panel ; 0 = Disabled ; 1 = Enabled DisplayExtPhysLayerStats=0 ; OAMFaultManagementControl ; Controls behavior of OAM Fault Management processing: ; Bit0: Respond to AIS Cells with RDI (0 = Disable, 1 = Enable) ; Bit1: Respond to CC Cells (0 = Disable, 1 = Enable) OAMFaultManagementControl=3 ; ******* Arbitrator 1 (PCI or USB Device #1) Configuration [ARB1] ; Set SubVendor and SubSystem ID element of the PCI ID for PCI devices (Last 8 digits only) or the ; Vendor and Product ID element of the USB ID. DeviceId=USB\VID_0572&PID_CB00 ; Set the description displayed by Windows Device Manager DeviceDesc=Michelangelo USB ADSL Interface ; Set the description displayed by Windows Device Manager ChildDesc=Michelangelo USB ADSL Network Device ; ******* Arbitrator 2 (PCI Device #2) Configuration [ARB2] ; Set SubVendor and SubSystem ID element of the PCI ID for PCI devices (Last 8 digits only) or the ; Vendor and Product ID element of the USB ID. DeviceId="" ; Set the description displayed by Windows Device Manager DeviceDesc="" ; Set the description displayed by Windows Device Manager ChildDesc="" ; ******* PCI Device 3 Configuration [PciDevice3] ; Set SubVendor and SubSystem ID element of the PCI ID for PCI devices (Last 8 digits only) or the ; Vendor and Product ID element of the USB ID. DeviceId="" ; Set the description displayed by Windows Device Manager DeviceDesc="" ; ******* Class Installer Configuration [ClassInstall] ; Set the description displayed by Windows Device Manager for the PCI Device ID (Last 8 digits only) DeviceDesc0="" ; Set the description displayed by Windows Device Manager for the PCI Device ID (Last 8 digits only) DeviceDesc1="" ; Set the description displayed by Windows Device Manager for the PCI Device ID (Last 8 digits only) DeviceDesc2=""Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.