Instructions for MT5634ZPW-MTS version 4.15 driver disk ***Note: Installation of this modem requires opening your PC and installing an ISA card. Please unplug your computer and ground yourself before touching anything inside. Initial installation in Windows 95 Environment: 1. Shutdown Windows 95, then turn off and unplug your PC. 2. Remove the cover of the PC, then install and secure the MT5634ZPW in an empty ISA slot in the PC. 3. Attach speaker and microphone cables to speaker and microphone jack on mounting plate of the card. The speaker and microphone are not necessary for operation of the modem, but are necessary to fully use the voice modem software capabilities. 4. Attach telephone line from wall to line jack on mounting plate marked "line". You may also connect a telephone to the jack on the mounting plate marked "phone" if you want to, but it is not necessary. 5. Put the cover back on the PC, plug in PC power cord, and when satisfied that all connections are in order, power up. 6. As Windows 95 starts, a "New Hardware Detected" popup will appear. 7. The MT5634ZPW will be detected, and Windows 95 will ask for a driver disk. Insert the MT5634ZPW driver disk in the floppy drive and click "OK". 8. Windows 95 will copy the necessary files for the modem and serial wave device over to the hard drive. 9. When the installation completes, you may look in Control Panel/Modems/Diagnostics and click on the "More Info" button to verify communication with the modem. Driver upgrade: Note: This upgrade is for a PC with a MT5634ZPW driver version earlier than 4.15. Windows 95: 1. In Windows 95 only, go to /Control Panel/Systems/ Device Manager. Click on the + sign next to the Modems folder, and the MT5634ZPW should be listed. 2. Double-click on the icon for the MT5634ZPW, and the Multitech System's MT5634ZPW Properties window will open. 3. Click on the Drivers tab, then click on the Update Driver button in that screen. Insert MT5634ZPW driver disk into the floppy drive. 4. Allow Windows 95 to search for the driver by clicking next. Windows 95 should find the updated driver on the floppy drive. Click the Finish Button. 5. The Insert Disk popup will now occur, click "OK". The driver files will now be copied over to your hard drive. 6. The Wave driver update wizard will launch after the modem driver files are done copying. Windows 95 once again look to the floppy drive, and this time find the Voice Modem Serial Wave Device driver. Click Finish, and the driver will be updated. 7. At this time you will be dropped back to the Properties window. If you click on the Driver File Details tab, you can verify that the version is now 4.15. 8. Close the various Windows which are open. Shutdown Windows 95, and reboot in order for the driver files update to take effect.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.