ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex RL100TX/10base PCI Fast Ethernet Adapter º º (C) Copyright PDS, 1997. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ INTRODUCTION ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ The packet driver RL100PD.COM for DOS conforms to the Packet Driver Specification v1.09 developed by FTP Software Inc. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ RL100PD Syntax ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ RL100PD [-d] [-n] [-w] [-u] [-h] <PD_INT_NO> where: [-d] The "-d" option does not start LAN card until this driver is called by the higher layer programs first. [-n] Your NOVELL server uses NOVELL ISO-like packets. Your NOVELL workstation uses NOVELL 8137 packets. You can use this option to convert NOVELL 8137 packets into NOVELL ISO-like packets. [-w] Steve Wallace added a hack to let the packet drivers run under Windows. This is not to be construed with the proper solution, which is to write a TCP/IP package for Windows. This hack is enabled only when you use the '-w' switch. [-u] This option unloads the Packet Driver. [-h] This option displays the on-line help. <PD_INT_NO> This specifies the software interrupt (IRQ) where you'll load the packet driver. It must be in the range 0x60 to 0x80. Notice !! The PC/TCP kernel, by default, is loaded at interrupt 0x61 (so don't load the packet driver there!) Example: The following command line loads the Compex RL100TX/10Base PCI Fast Ethernet adapters Packet Driver at software interrupt 60h. RL100PD 0x60 Note: The default transmission speed is auto-detection. Note: The placement of 0x prior to the parameters. After the Packet Driver is loaded, you can run the PC/TCP kernel ETHDRV.EXE. The PC is then ready for PC/TCP communications. To run PC/TCP applications, You need to load PC/TCP Kernel ("ETHDRV.EXE"). a. Refer to PC/TCP manual, Command Reference section, Chapter 2.3. b. The following example will load the Kernel and allocate 8 packet buffers. Increasing the # of packet buffers (from the default of 5) prevents dropping packets due to a buffer shortage. ETHDRV -p 8 <Enter> c. At this point, you are ready to run PC/TCP applications (e.g., 'ftp', 'telnet'). example ftp 130.172.24.101 , 130.172.24.101 is host address. Regard to host address , you must know its address.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.