#
| README file for
|
| ELSA Wireless LAN products/accessories
|
| ELSA AirLancer MC-2 Driver & Firmware Upload
|
| Copyright (c) 2001 ELSA AG, Aachen (Germany)
|
| ELSA AG makes no representation or warranties for software
| not developed or manufactured by ELSA and which is sold
| under any name other than ELSA, especially with regard to
| shareware and other third-party software. This applies in
| particular to the "Year-2000 compatibility" of the software.
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11
| D-52070 Aachen
| Germany
|
| ELSA Inc. Internet : http://www.elsa.com
| 1630 Zanker Road
| San Jose, CA 95112
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec.5
| Nanking East Road
| Taipei 105
| Taiwan
|
| ELSA Japan Inc. Internet : http://www.elsa.com
| Mita Suzuki Building 3F
| 5-20-14 Shiba, Minato-ku
| Tokyo 108-0014
| Japan
|
| 03/07/2001, OSchilpe
Table of Contents
1. Overview
2. Contents
3. Installation
--------------------------------------------------------------------
1. Overview
This .zip file contains software to install
AirLancer MC-2 under Windows 2000
and to update the card-firmware.
--------------------------------------------------------------------
2. Contents
The file contains the following folders:
LIESMICH.TXT this file in german
README.TXT this file
FIRMWARE.206\ contains card-firmware 2.06 as
.bin-file and as upload file for
updating the card via an
ELSA Wireless Access Point.
Update-W9x_only\ Update-tool for updating
the card under W95/98/Me using a laptop/pc.
Driver.w2k\ Driver for Windows 2000, Version 2.07
--------------------------------------------------------------------
3. Installation
3.1. Uploading the card-firmware
First, load the card-firmware into your AirLancer MC-2.
Alas, there is no upload tool for Windows 2000.
There are 2 possibilities to achieve the upload:
1.) Connect your Access Point
(LANCOM Wireless L-2, IL-2, L-11, IL-11)by ethernet cable
to your laptop or pc.
Plug the AirLancer MC-2 that hast to be updated into
the Access Point.
Then upload via LANconfig, Telnet or Webconfig the file
LC_AL2_U.206, situated in folder FIRMWARE.206
Please wait for some seconds until the Access Point has
flashed the card (5-10 seconds).
Turn the Access Point off and take out the AirLancer MC-2.
2.) Flash the firmware using a laptop or pc (equipped with
an ISA adapter), running under Windows 95,98 or Me.
Herefore, the drivers for AirLancer MC-2 have to be installed.
The drivers provided with this file, situated in the folder
DRIVER.W2K can be used also for these operating systems.
AirLancer MC-2 must be plugged into the laptop and being
cativated.
Then start the file WLU.exe from the folder UPDATE-W9x_only.
Klick on 'update'.
Insert the path to the file FIRMWARE206.bin in folder
FIRMWARE.206 .
The tool now uploads the firmware into the card.
3.2. Installation of the drivers for Windows 2000.
Plug the updated AirLancer MC-2 into your laptop or pc
(equipped with an ISA adapter) running under Windows 2000.
During the plug&play hardware installation insert the path to
ELSAAL2.inf in folder DRIVER.w2k.
Afterwards, your AirLancer MC-2 is ready for running under
Windows 2000.
--------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.