230k.txt Driver File Contents (zoltrix.ZIP)

                    230,400bps Driver for K56 Internal Modem
                    -------------------------------

A. Installation Instructions

1.  Double click on "Modems" in the Control Panel
2.  Click on the "ADD" button
3.  Click on the box located next to "Don't detect my modem, I will select
    it from a list"
4.  Click on the "Next" button
5.  Click on the "Have Disk" button
6.  Insert the diskette containing the driver into Drive A:
7.  Click on the "OK" button
8.  Highlight the correct model by clicking on it
9.  Click on the "Next" button
10. Highlight the correct port that you modem is set to.
11. Click on the "Next" button
12. The Wave device for Voice modems should now be detected. 
    Select the driver from the driver diskette if prompted. 
13. You will be instructed that the modem has been setup successfully.
14. Click on the "Finish" button
15. Click on the "Close" button

NOTE: When Windows copying the SERIAL.VXD file, it may report the driver
being overwrote is an newer version. Please ignore this warning and
always overwrite the file with the one from this driver set.


                          WARRANTY DISCLAIMER
                          ===================

ZOLTRIX PROVIDES THIS WINDOWS 95 DRIVER SET "AS IS" AND WITHOUT ANY
WARRANTY. TO THE EXTENT PERMITTED UNDER APPLICABLE LAW, ZOLTRIX
DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. SPECIFICALLY, ZOLTRIX MAKES NO REPRESENTATION OR WARRANTY THAT
THE DRIVER SET IS FIT FOR ANY PARTICULAR PURPOSE.

ZOLTRIX SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM THE USE OF
THIS DRIVER, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFIT, DATA OR USE
OF THE SOFTWARE, OR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR OTHER SIMILAR CLAIMS, EVEN IF ZOLTRIX HAS BEEN SPECIFICALLY
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

FURTHER, ZOLTRIX RESERVES THE RIGHT TO REVISE THIS DRIVER SET AND TO MAKE
CHANGES TO IT FROM TIME TO TIME WITHOUT OBLIGATION TO NOTIFY ANY PERSONS
OR ORGANIZATION OF SUCH REVISION OR CHANGE.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.95