Readme1.txt Driver File Contents (Cv90604w.exe)

Jaton Communicator/Explorer 56/plus/V.90 Flash Upgrade

File List:

604_0211.BIN ... Firmware Binary Code (.BIN File) Version 6.04
EXP98.INF ...... Modem Device Driver Installation File Ver. 1.40
WAVE98.INF ..... Serial Wave Device Driver Installation File Ver. 1.60
EXP98INF.TXT.... Windows 95/98/NT4.0 Modem Driver Installation Guide
FLASHV90.EXE ... Flash Utility Version 1.63
README1.TXT .... This file.


1. Go to Windows 95/98 "Control Panel" -> Double-click on "Modems" ->     Click on "Diagnostics" -> select the COM Port for the modem -> 
   Click on "More Info...". Write down the Com Port used by the modem.
   If the modem information is not displayed after a couple of minutes,
   or an error message come up, stop and reinstall your modem drivers.

2. Double click on FLASHV90.EXE to install the flash utility.

3. Click Start->Program->FlashV90 to Run the utility.

4. Select the COM port and the modem.

5. Enter the path and the .BIN file name of the firmware code.

6. Follow on-screen instructions to finish.

Warning: Do not interrupt the flashing process, eventhough you could 
         run the flash again. The modem memory may need be physically          flashed in case the software flash fail. 

7. Go back to step 1 to verify the modem after the Windows restart.

8. If the modem drivers are not up to date, you will see an error
   message "Can't Open Port", reinstall the modem drivers.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.09