oemsetup.inf Driver File Contents (VT86c100a.zip)

;
;  Purpose:   Netcard setup information file for Windows NT 3.51 / NT 4.0
;
;  Author:    Tevin Chen
;
;  Date:      May, 2001
;

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    ; VT3043/VT3065 based Fast Ethernet Adapter (Controller)
    FET

[PropertiesFET]
    Property_1 = "ConnectionType", +
                 "Connection Type", +
                 "0,1,2,3,4", +
                 "Auto-Negotiation,100BaseTx Half Duplex,100BaseTx Full Duplex,10BaseT   Half Duplex,10BaseT   Full Duplex", +
                 "enum"
    Property_2 = "ValidatePacketLen", +
                 "Validate Packet Length", +
                 "0,1", +
                 "Disabled,Enabled", +
                 "enum"
    Property_3 = "NetworkAddress", +
                 "Network Address", +
                 "", +
                 "", +
                 "edit"
    Property_4 = "TransmitBuffers", +
                 "Transmit Buffers", +
                 "4,128", +
                 "", +
                 "int"
    Property_5 = "ReceiveBuffers", +
                 "Receive Buffers", +
                 "4,128", +
                 "", +
                 "int"

;============================================================================

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "VIA Technologies, Inc."

; Driver Version info
; VERSION.... 2.64
ProductMajorVersion     = "2"
ProductMinorVersion     = "64"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358

ProductSoftwareName     = "FETNDIS"
ProductSoftwareTitle    = "PCI 10/100Mb Fast Ethernet Adapter Driver"
NT4Driver = "fetnd4.sys"
NT351Driver = "fetnd3.sys"
ProductSoftwareImagePathNT4 = "\SystemRoot\System32\drivers\"$(NT4Driver)
ProductSoftwareImagePathNT351 = "\SystemRoot\System32\drivers\"$(NT351Driver)
NetRuleSoftwareType     = "FETSys ndisDriver FETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """FETSys"" yes no container"
NetRuleSoftwareClass    = {"FETDriver basic"}
NetRuleSoftwareSWBindable = {"FETDriver FETAdapter non exclusive 100"}

HelpFileName = "fetndh.hlp"
ProductHardwareName = "FETNDIS"

ProductHardwareFETVT3065Title = "VIA PCI 10/100Mb Fast Ethernet Adapter"
ProductHardwareFETVT3043Title = "VIA VT86C100A Fast Ethernet Adapter"
ProductHardwareFETDescription = "PCI 10/100Mb Fast Ethernet Adapter"

NetRuleHardwareFETType  = "FET FETAdapter"
NetRuleHardwareFETClass = {"FETAdapter basic"}
AdapterFETType = 5   ;; PCI board
HelpFETId = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638

; VT3065 (0x30651106 == 811929862)
VT3065CFID = 811929862

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;============================================================================
[GeneralConstants]
Sub = ""
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

NT351Version = "3.51"
NT40Version = "4.0"

;============================================================================
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
;============================================================================
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
;============================================================================
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    ifstr(i) $($1) == ""
       goto returnoptions
    endif
    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) in $(PlatformList)
       goto returnoptions
    else
       set Status = STATUS_NOTSUPPORTED
       goto finish_ReturnOptions
    endif
    else
    set Status = STATUS_NOLANGUAGE
    goto finish_ReturnOptions
    endif
;----------------------------------------------------------------------------
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
;----------------------------------------------------------------------------
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
;============================================================================
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
    Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
;----------------------------------------------------------------------------
Begin = +
    ; Get the version of NT from registry (for NT3.51/NT4.0)
    set CurrentVersionValue = ""
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyNt
    ifstr(i) $(KeyNt) != ""
        GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
        CloseRegKey $(KeyNt)
    endif

    set TargetVersion = *($(CurrentVersionValue),4)
    set TargetOS = ""
    ifstr $(TargetVersion) == $(NT351Version)
        set TargetOS = "NT351"
    else-ifstr $(TargetVersion) == $(NT40Version)
        set TargetOS = "NT4"
    else
        set Error = "This driver does not support Windows NT version "*($(CurrentVersionValue),4)" !"
        goto fatal
    endif

    Ifstr(i) $(!NTN_InstallMode) == deinstall
    set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
    set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
    set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
      Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
           Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
           endif
           set Error = $($R0)
           set from = end
           set to = end
           goto nonfatalinfo
      else
           set StartLabel = configureadapter
      endif
   else
    set StartLabel = installadapter
    set OEM_ABANDON_OPTIONS = {}
    set OEM_ABANDON_SOFTWARE = FALSE
    set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
;----------------------------------------------------------------------------
installadapter = +
    install "Install-UTIL"

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
    CloseRegKey $(KeyProduct)
    ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
       Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
           $(ProductVersion)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif
       goto end
    else
       Shell $(UtilityInf), CardExistedDlg
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
          goto ShellCodeError
       endif
       ifstr(i) $($R1) != "OK"
           set CommonStatus = STATUS_USERCANCEL
           goto end
       endif
       set OldVersionExisted = $(TRUE)
    endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
        endif
        set Error = $($R0)
           Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
           Goto successful
    Endif
    Set SrcDir = $($R1)
    ; HELP....
    ;install "Install-Hlp"
    endif
    Goto installproduct
;----------------------------------------------------------------------------
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) == $(KeyNull)
        Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       Goto fatalregistry
    Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
    Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "AdapterSubID"
            set AdapterSub = $(ValueData)
        endif
    EndForListDo

    set CurrKeyValueList = {}
    ForListDo $(PropertyKeyList)
        set KeyName = $($)

        ForListDo $(ValueList)
            set ValueName = *($($), 1)
            set ValueData = *($($), 4)
            ifstr $(ValueName) == $(KeyName)
                set CurrKeyValueList = >($(CurrKeyValueList), $(ValueData))
            endif
        EndForListDo
    EndForListDo

;----------------------------------------------------------------------------
adapteroptions = +
    set from = adapteroptions    

    LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" PropHandle
    LibraryProcedure SetResult, $(PropHandle), ShowProp, $(PropertyList), +
                                                         $(CurrKeyValueList), +
                                                         $(KeyValueList), +
                                                         $(ComboValueList), +
                                                         $(ValueTypeList), +
                                                         $(HelpFileName)
    FreeLibrary $(PropHandle)

    ifstr $(SetResult) == "PROPERTY_UI_USER_CANCEL"
        set CommonStatus = STATUS_USERCANCEL
        goto end
    endif
    ifstr $(SetResult) == $(CurrKeyValueList)
        set CommonStatus = STATUS_USERCANCEL
        goto end
    endif


    ifstr(i) $(!NTN_InstallMode) == configure
        goto updateparameters
    endif
;----------------------------------------------------------------------------

installproduct =+
    StartWait
    ; DEVICE_ID....
    ; 65535

    ; search device ID for 3043 and 3065
    set AdapterList65 = {}
    set AdapterList43 = {}

    set-div DeviceID = $(VT3043CFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif

    LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" LibHandle

    ifstr(i) $($R0) == {}
         set-div DeviceID = $(VT3065CFID) 65535
         Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

         ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
         endif

         ifstr(i) $($R0) == {}
              set Error = $(CANNOT_FIND_ANY_CARD)
              set CommonStatus = USER_CANCEL
              set from = end
              goto nonfatal
         else
              set AdapterList65 = $($R0)              
         endif
    else
         set AdapterList43 = $($R0)

         set-div DeviceID = $(VT3065CFID) 65535
         Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

         ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
         endif

         Ifstr(i) $($R0) != {}
            set AdapterList65 = $($R0)
        Endif

    endif

    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
            Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Goto ShellCodeError
            Else-Ifstr(i) $($R0) == STATUS_FAILED
                Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set Error = $($R0)
                Goto fatal
            Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                Goto successful
            Endif
            Set SrcDir = $($R1)
        Endif
        ; install help file. In attended mode, system will execute the installation from
        ; "installproduct" , so, I add another install help here (AJ 3/25/1999)
        ;install "Install-Hlp"

        install "Install-Option"

        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        endif

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                                                    $(ProductSoftwareName), +
                                                    $(ProductSoftwareName), +
                                                    $(ProductSoftwareTitle), +
                                                    $(STF_CONTEXTINFNAME), +
                                                    $(ProductSoftwareImagePath$(TargetOS)), +
                                                    "kernel", +
                                                    "NDIS", +
                                                    {}, +
                                                    "", +
                                                    $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif

        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                    {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                    {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif

    endif

;----------------------------------------------------------------------------
    ifstr(i) $(AdapterList65) == {}
        goto InstallAdapter43
    endif

    ForListDo $(AdapterList65)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3065"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
                                                       $(STF_CONTEXTINFNAME), +
                                                       $(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                ;    set ConnectionIndex = $(Combo1Out)
                ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                ;    set CommonStatus = STATUS_USERCANCEL
                ;    ui pop 1
                ;    goto end
                ;else
                ;    ui pop 1
                ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3065CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3065 registery
            set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                                {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),32},+
                                {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+
                                {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
                                {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                                {ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0}}

            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

    FreeLibrary $(LibHandle)

    ifstr(i) $(AdapterList43) == {}
            goto InstallAdapterOK
    endif

;----------------------------------------------------------------------------
InstallAdapter43 =+

    ForListDo $(AdapterList43)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3043"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                    ;    set ConnectionIndex = $(Combo1Out)
                    ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                    ;    set CommonStatus = STATUS_USERCANCEL
                    ;    ui pop 1
                    ;    goto end
                ;else
                    ;    ui pop 1
                    ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3043CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3043 registery
            set NewValueList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                                {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+
                                {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),32},+
                                {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+
                                {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                                {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                                {ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0}}

            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

;----------------------------------------------------------------------------
InstallAdapterOK =+
    EndWait
    goto successful
;----------------------------------------------------------------------------
updateparameters =+

    ForListDo $(PropertyKeyList)
        set KeyName = $($)
        set PropIndex = ~($(PropertyKeyList), $(KeyName))

        ifstr *($(SetResult), $(PropIndex)) != *($(CurrKeyValueList), $(PropIndex))
            set NewRegValue = *($(SetResult), $(PropIndex))

            Ifstr $(KeyName) == "NetworkAddress"
                set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_SZ),$(NewRegValue)}}
            Else
                set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_DWORD),$(NewRegValue)}}
            Endif

            shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            Endif
        endif
    EndForListDo

    goto successful
;----------------------------------------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), +
                                                        $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end
;----------------------------------------------------------------------------
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set !UG_Filename = $($R0)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
     else
        goto fatalregistry
     endif
     goto end
;----------------------------------------------------------------------------
successful = +
    goto end
;----------------------------------------------------------------------------

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
;----------------------------------------------------------------------------
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
    goto $(from)
    else
    goto "end"
    endif
;----------------------------------------------------------------------------
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatalmsg = +
    ifstr(i) $(Error) == ""
    Set Severity = NONFATAL
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
;----------------------------------------------------------------------------
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;----------------------------------------------------------------------------
fatal = +
    ifstr(i) $(Error) == ""
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    goto setfailed
;----------------------------------------------------------------------------
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
;----------------------------------------------------------------------------
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
    set OEM_ABANDON_ON = FALSE
    goto abandon
    endif
    goto end
;----------------------------------------------------------------------------
end = +
    goto term
;----------------------------------------------------------------------------
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
    AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
;----------------------------------------------------------------------------
[Install-Update]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"

    ; HELP....
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Install-UTIL]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "ALWAYS"

    AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
    CopyFilesInCopyList
    ClearCopyList
    exit
[Source Media Descriptions]
    1  = "PCI 10/100Mb Fast Ethernet Adapter Driver"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
;============================================================================
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-FET-NT4]
1, fetnd4.sys  , SIZE=999
[Files-FET-NT351]
1, fetnd3.sys  , SIZE=999
[Files-SubID]
1, pcienum.sys , SIZE=999
[Files-PropUI]
1, ntutil.dll  , SIZE=999
1, fetndh.hlp  , SIZE=999
;============================================================================
[LanguagesSupported]
    ENG
[OptionsTextENG]
    FET  = "VIA PCI 10/100Mb Fast Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
           "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "PCI 10/100Mb Fast Ethernet Adapter Driver"
FunctionFETTitle = "PCI 10/100Mb Fast Ethernet Adapter Setup"

ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

; Add for New UI ****************
PropertyKeyList = ^(Properties$(Option), 1)
PropertyList    = ^(Properties$(Option), 2)
KeyValueList    = ^(Properties$(Option), 3)
ComboValueList  = ^(Properties$(Option), 4)
ValueTypeList   = ^(Properties$(Option), 5)

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.82