NTSTACFG.INI Driver File Contents (wnt471e.exe)

;                      NTSTACFG.INI
;This file defines the actions taken by NTSTACFG.EXE.
;
;
;Description of tokens:
;
;The descriptions below show the format of various tokens NTSTACFG
;recognizes.  To add a new token, use the format shown, except add
;a unique number to for each '#' in the token name.
;
;
;SVC#=exename, service name, display name, dependency, action
;	Stops, or Installs and/or Starts a service
;  By default, the Display Name is the Service Name specified. So the 
;  display name can be left as a blank seperated by commas.
;  If the start of this service is dependent on the start of any other
;  service/service-group, give that service/group name in the dependency.
;
;ICON#=cmd line, description, group, common flag
;	Adds and icon to a program group
;	
;INI#=inifilename,section name,key,value,[special]
;This will set "key"="value" in this "section" of the ini "filename" . "special" is optional, and it
;can be set to CONCAT or LIST only. CONCAT will concatenate the specified string in the present value string.
;LIST - This is like the 'device=c:\ldclient\vuser.386' type entries, where the same key can be repeated.
;If no option is specified, then it will not concatenate or list. It will simply overwrite the present value.
;
;FILE#=filename, [SYS]  
;	Copies a file (SYS means copy to SYSTEM32 directory)
;
;For all filenames in the tokens above (such as 'exename' in the 
;service token), NTSTACFG will add the path to where the files
;are copied, unless the filename already has a full path.  For
;example, if NTSTACFG sees the token:
;
;FILE1=WUSER32.EXE, WUSER32.EXE
;
;NTSTACFG will add to the filename 'c:\novell\zenrc' (or whatever the default
;path is) before actually creating the icon.
;
;NTSTACFG identifies the following macros in this ini file:- %ROOT%, %DEST%, %SYSTEM%, %SVCSYSTEM%, 
;and replaces them with the destination root, CLIENTDIR, windows diretory, and windows system directory, respectively. 
;
;Order of Section Execution:
;[Pre Copy]
;[Common Files]
;[Post Copy]
;
;This is the default share name/directory.  NTSTACFG will first look
;for the share name, and then the directory name on the first
;local drive.
[Directories]
CLIENTDIR=NOVELL\ZENRC

[Component Order]
C1=Remote Control

;**** Begin of Remote Control component ****
[Remote Control Help]
L0=Installs the Novell WUser Agent service.  This service allows a remote console to remote control the target computer.
L1=This component also install KBSTUFF, a keyboard driver, and IDIS_NT.DLL, a Windows NT 3.51 display driver.  The display driver is not installed on Windows NT 4.0 or greater.

[Remote Control Pre Copy]
SVC1=wuser32.exe, Intel WUser Agent, , , stop
SVC2=wuser32.exe, Intel WUser Agent, , , remove
SVC3=wuser32.exe, Novell WUser Agent, , , stop

[Remote Control Files]
(OLDUI)FILE41=idis_nt.dll, idis_nt.dll, SYS
FILE42=kbstuff.sys, kbstuff.sys, DRIVERS
FILE43=multprot.dll, multprot.dll
FILE44=queuebuf.dll, queuebuf.dll
FILE47=wuser32.exe, wuser32.exe
FILE48=loc32vc.dll, loc32vc.dll
FILE50=ctl3d32.dll, ctl3d32.dll, SYS
FILE51=wusermsg.dll, wusermsg.dll, LANG
FILE52=cmlwp32.dll, cmlwp32.dll
FILE53=lwpacc32.dll, lwpacc32.dll
FILE54=zenpol32.dll, zenpol32.dll
FILE55=yukti.dll, yukti.dll, SYS
FILE56=drishti.dll, drishti.dll, SYS
FILE57=diagnt.dll, diagnt.dll
FILE58=zentray.exe, zentray.exe, SYS
FILE59=lwput32.dll, lwput32.dll
FILE60=sftplg32.dll, sftplg32.dll, LANG
FILE61=srvftp32.acc, srvftp32.acc
FILE62=srvftp32.exe, srvftp32.exe
FILE63=utillg32.dll, utillg32.dll
FILE64=wtalk32.exe, wtalk32.exe
FILE65=talklg32.dll, talklg32.dll, LANG
FILE66=rcagent.hlp, rcagent.hlp, LANG
FILE67=rcagent.cnt, rcagent.cnt, LANG
FILE68=lwppro.ini, ..\lwppro.ini, SYS
FILE69=wsr32.dll, wsr32.dll, LANG

[Remote Control Post Copy]
; KBSTUFF driver for Wuser32
REG0=HKEY_LOCAL_MACHINE, SYSTEM\CurrentControlSet\Services\KBSTUFF\Type, 1, , DWORD
REG1=HKEY_LOCAL_MACHINE, SYSTEM\CurrentControlSet\Services\KBSTUFF\Start, 2, , DWORD
REG2=HKEY_LOCAL_MACHINE, SYSTEM\CurrentControlSet\Services\KBSTUFF\Group, Extended Base, ,
REG3=HKEY_LOCAL_MACHINE, SYSTEM\CurrentControlSet\Services\KBSTUFF\ErrorControl, 1, ,DWORD
REG4=HKEY_LOCAL_MACHINE, SOFTWARE\Microsoft\Windows\CurrentVersion\Run\ZENRC Tray Icon, zentray.exe, ,

(OLDUI)VIDEO0=idis_nt, EVERYOTHER
BADVIDEO1=s3virge
BADVIDEO2=stbvirge
BADVIDEO3=glint
VIDEO1=drishti, EVERYOTHER

INI1=lwppro.ini, LWPAccess, SRVFTP32AccessFile, %DEST%\srvftp32.acc, 


SVC2=wuser32.exe, Novell WUser Agent, Remote management, WM, install + start + interactive
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.35