;***********************************************************************
;
; OEMSETUP.INF
;
; Novell NetWare Client base installation INF
;
;
;***********************************************************************
;
; The following is the version info for Novell
;
;VeRsIoN=v4.71 Novell Client Install for Windows NT (980305)
;CoPyRiGhT=copyright 1992-2000, by Novell, INC. All rights reserved.
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetProvider
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
NWFS
NDPS
CPROXY
NTTSA
WM
NALNTSRV
NetWareIP
; WUA
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG, ENGLISH
[OptionNWFS]
INF = "OEMNPRNW.INF"
INSTALL = YES
OPTIONAL = NO
CONFIGDLL = WIZCFG.DLL
[OptionNDPS]
INF = "OEMNSVNP.INF"
INSTALL = YES
OPTIONAL = YES
[OptionCPROXY]
INF = "OEMNXPGW.INF"
INSTALL = NO
OPTIONAL = YES
[OptionNTTSA]
INF = "OEMNSVTS.INF"
INSTALL = NO
OPTIONAL = YES
[OptionWM]
INF = "OEMNSVWM.INF"
INSTALL = NO
OPTIONAL = YES
CONFIGDLL = WIZCFG.DLL
[OptionNALNTSRV]
INF = "OEMNSVNS.INF"
INSTALL = NO
OPTIONAL = YES
[OptionWUA]
INF = "OEMNSVWA.INF"
INSTALL = NO
OPTIONAL = YES
[OptionNetWareIP]
INF = "OEMNSVIP.INF"
INSTALL = NO
OPTIONAL = NO
[InitBaseVars]
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
KeyInfo = {}
RegistryErrorIndex = NO_ERROR
NoTitle = 0
CurrentControlSet = "SYSTEM\CurrentControlSet"
ServicesBaseName = $(CurrentControlSet)"\Services"
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
NwSubsInf = "NWSUBS.INF"
NwSetupDll = "nwlangid.dll"
NwOemSetupInf = "oemnprnw.inf"
SoftwareType = "service"
Exit_Code = 0
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
[date]
;
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
;
Now = {} ? $(!LIBHANDLE) GetSystemDate
[DetectSystemMemory]
SystemMemory = "" ? $(!LIBHANDLE) GetMemorySize
[ProcessorDetect]
!STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
Set !G:DebugOutputControl = 0
Debug-Output "OEMSETUP.INF: ************************** Identify ***********************"
set NTLanguage = $(!STF_LANGUAGE)
Debug-Output "OEMSETUP.INF: Identify, NTLanguage = "$(NTLanguage)
Debug-Output "OEMSETUP.INF: Identify, Current Directory = "$(!STF_CWDDIR)
Debug-Output "OEMSETUP.INF: Identify, Source Directory = "$(!STF_SRCDIR)
Debug-Output "OEMSETUP.INF: Identify, OemSetupFilePath = "$(!P:OemSetupFilePath)
Debug-Output "OEMSETUP.INF: Identify, OptDisketteSrc = "$(!P:OptDisketteSrc)
set SourceDir = $(!P:OptDisketteSrc)
set !NW_SourceDir = $(SourceDir)
detect ProcessorDetect
ifstr(i) $(!STF_PROCESSOR) == "I386"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I486"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I586"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "R4000"
set !STF_PLATFORM = "Mips"
else
set !STF_PLATFORM = "Alpha"
endif
StartWait
read-syms Identification
read-syms FileConstants
;
; Check if we are already installed, if so fail this request
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\NetWareWorkStation" $(MAXIMUM_ALLOWED) KeyProduct
ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
set CommonStatus = STATUS_FAILED
goto end
endif
Ifstr(i) $(SourceDir) == ""
Debug-Output "OEMSETUP.INF: SourceDir is blank, not first time install"
set Status = STATUS_FAILED
set Identifier = {}
set Media = {}
goto identify_exit
Endif
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SourceDir)
Ifstr(i) $(STATUS) != "ERROR"
set SourceDir = $(STATUS)
Endif
;
; Get the language name
;
Shell "" GetLanguageName $(SourceDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set LanguageName = $($R0)
set LangOemsetupInf = $(SourceDir)"NLS\"$(LanguageName)"\"$(NwOemSetupInf)
FlushInf $(LangOemsetupInf)
;
; Get the Media Descriptions from the language specific oemsetup
;
shell $(LangOemsetupInf) Identify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set Status = $($R0)
Set Identifier = $($R1)
Set Media = $($R2)
identify_exit = +
Debug-Output "Status = "$(Status)
Debug-Output "Identifier = "$(Identifier)
Debug-Output "Media = "$(Media)
goto end
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error "$(TWM_ShellErrorTitle)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
set CommonStatus = STATUS_FAILED
goto end
end = +
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS:
; STATUS_SUCCESSFUL | STATUS_NOLANGUAGE | STATUS_FAILED
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
Set !G:DebugOutputControl = 0
Debug-Output "OEMSETUP.INF: ****************************** ReturnOptions ************************"
set NTLanguage = $($0)
Debug-Output "OEMSETUP.INF: ReturnOptions, NTLanguage = "$(NTLanguage)
Debug-Output "OEMSETUP.INF: ReturnOptions, OemSetupFilePath = "$(!P:OemSetupFilePath)
Debug-Output "OEMSETUP.INF: ReturnOptions, OptDisketteSrc = "$(!P:OptDisketteSrc)
StartWait
read-syms FileConstants
detect ProcessorDetect
ifstr(i) $(!STF_PROCESSOR) == "I386"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I486"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I586"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "R4000"
set !STF_PLATFORM = "Mips"
else
set !STF_PLATFORM = "Alpha"
endif
StartWait
Ifstr(i) $(!NW_SourceDir) == ""
set !NW_SourceDir = $(!STF_SRCDIR)
Debug-Output "OEMSETUP.INF: NW_SourceDir set to "$(!NW_SourceDir)
Endif
set SourceDir = $(!NW_SourceDir)
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SourceDir)
Ifstr(i) $(STATUS) != "ERROR"
set SourceDir = $(STATUS)
Endif
;
; Get the language name
;
Shell "" GetLanguageName $(SourceDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set LanguageName = $($R0)
ForListDo ^(Options, 1)
read-syms Option$($)
set LangOemsetupInf = $(SourceDir)"NLS\"$(LanguageName)"\"$(INF)
;
; Get the option text from the language specific oemsetup
;
Shell $(LangOemsetupInf) ReturnOptions $(NTLanguage)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Status = $($R0)
ForListDo $($R1)
set OptionList = >($(OptionList), $($))
EndForListDo
ForListDo $($R2)
set OptionTextList = >($(OptionTextList), $($))
EndForListDo
EndForListDo
Debug-Output "Status = "$(Status)
Debug-Output "OptionList = "$(OptionList)
Debug-Output "OptionTextList = "$(OptionTextList)
EndWait
goto end
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error "$(TWM_ShellErrorTitle)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
set CommonStatus = STATUS_FAILED
goto end
end = +
Return $(Status) $(OptionList) $(OptionTextList)
;----------InstallOption-------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS:
; STATUS_SUCCESSFUL | STATUS_NOLANGUAGE | STATUS_USERCANCEL | STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
Set !G:DebugOutputControl = 0
Debug-Output "OEMSETUP.INF: ******************* InstallOption *******************"
StartWait
read-syms FileConstants
;
; extract parameters
;
set NTLanguage = $($0)
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set SourceDir = $($2)
detect ProcessorDetect
ifstr(i) $(!STF_PROCESSOR) == "I386"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I486"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "I586"
set !STF_PLATFORM = "I386"
else-ifstr(i) $(!STF_PROCESSOR) == "R4000"
set !STF_PLATFORM = "Mips"
else
set !STF_PLATFORM = "Alpha"
endif
StartWait
Debug-Output "InstallOption: SourceDir = "$(SourceDir)
LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SourceDir)
Ifstr(i) $(STATUS) != "ERROR"
set SourceDir = $(STATUS)
Endif
;
; Get the language name
;
Shell "" GetLanguageName $(SourceDir)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set LanguageName = $($R0)
Debug-Output "OEMSETUP.INF: Using "$(LanguageName)
read-syms Option$(Option)
set LangOemsetupInf = $(SourceDir)"NLS\"$(LanguageName)"\"$(INF)
Shell $(LangOemsetupInf) InstallOption $(NTLanguage) $(Option) $(SrcDir) $(AddCopy) $(DoCopy) $(DoConfig) $(LanguageName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
else
set CommonStatus = $($R0)
goto end
endif
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error "$(TWM_ShellErrorTitle)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
set CommonStatus = STATUS_FAILED
goto end
end = +
EndWait
Return $(CommonStatus)
;----------GetLanguageName-------------------------------------------------
;
; GetLanguageName:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To get the intalled language name.
;
; INPUT: $($0): Language Install passed in to use (ENG always, broken)
;
; OUTPUT: $($R0): Language Name "ENGLISH", "SPANISH", etc
;
;------------------------------------------------------------------------
[GetLanguageName]
set SourceDir = $($0)
read-syms FileConstants
;
; Get the language ID for this machine from NT
;
LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SourceDir)
Ifstr(i) $(STATUS) != "ERROR"
set SourceDir = $(STATUS)
Endif
Ifstr(i) $(SourceDir) == ""
set NWSetupPath = $(NwSetupDll)
Else
set NWSetupPath = $(SourceDir)$(NwSetupDll)
Endif
LoadLibrary "" $(NWSetupPath) NwLibHandle
LibraryProcedure LanguageName $(NwLibHandle) NWGetLanguageName $(SourceDir) "OEMSETUP.INF"
FreeLibrary $(NwLibHandle)
Return $(LanguageName)
;/////////////////////////////////////////////////////////////////////////////
;/////////////////////////////////////////////////////////////////////////////
;/////////////////////////////////////////////////////////////////////////////
;/////////////////////////////////////////////////////////////////////////////
;/////////////////////////////////////////////////////////////////////////////
;/////////////////////////////////////////////////////////////////////////////
;
; Functionality to replace that found in NCPASHEL.INF
;
;
[StfVariableDetect]
STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
STF_PLATFORM = "I386"
STF_LANGUAGE = "" ? $(!LIBHANDLE) GetLanguage
LanguageList = ^(LanguageID, 1)
STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir
STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
STF_NTPATH = $(!STF_WINDOWSPATH)
STF_COMPUTERNAME = "" ? $(!LIBHANDLE) GetMyComputerName
STF_BUSTYPE = "" ? $(!LIBHANDLE) GetMyBusType
STF_BUSTYPELIST = "" ? $(!LIBHANDLE) GetMyBusTypeList
[StfVariableSyms]
ProcessorID_I386 = I386
ProcessorID_I486 = I486
ProcessorID_I586 = I586
ProcessorID_R4000 = R4000
ProcessorID_Alpha = Alpha_AXP
ProcessorID_PPC601 = PPC601
ProcessorID_PPC603 = PPC603
ProcessorID_PPC604 = PPC604
ProcessorID_PPC620 = PPC620
PlatformID_I386 = I386
PlatformID_Mips = Mips
PlatformID_Alpha = Alpha
PlatformID_PPC = ppc
STF_PRODUCT = WINNT
STF_USERNAME = ""
STF_INSTALL_MODE = "CUSTOM"
STF_UPDGRADE = NO
STF_NCDETECT = NO
STF_NCOPTION = ""
STF_NCDETCARD = 99999
STF_NCDETINFO = {}
STF_NC_PARAMS = {}
STF_NC_PNAMES = {}
STF_SRCDIR_KEYED = ""
STF_SRCDIR_USED = ""
STF_SRCDIR_OVERRIDE = ""
STF_SRCDIR_WINNT = ""
STF_TEMPLATE_CRITERR = "CRITERR2"
STF_TEMPLATE_NONCRITERR = "NONCRITERR2"
STF_INSTALLED_OS = {} ? $(!LIBHANDLE) GetInstalledOSNames
FatalErrorIndex = 1
!Exit_Code = 0
[DoAskOemsetupSource]
read-syms DoAskUpgradeSrcDlgText$(!STF_LANGUAGE)
shell "subroutn.inf" DoAskSourceEx $($0) $(DlgText)
Return $($R0) $($R1) $($R2) $($R3)
[Shell Commands]
set-title "Windows NT Setup"
Set !G:DebugOutputControl = 0
LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
Set !NCPA_HANDLE = ""
Ifstr(i) $(NTN_InfSection) != OemSoftwareInstall
LoadLibrary "y" $(!STF_CWDDIR)ncpa.cpl !NCPA_HANDLE
Endif
Shell "subroutn.inf" ReadSetupHelpIds
SetHelpFile "setupnt.hlp" $(!MinimumID) $(!MaximumID)
set-subst LF = "\n"
StartWait
read-syms StfVariableSyms
read-syms StfVariableDetect
detect StfVariableDetect
Set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Control\ProductOptions" 33554432 KeyProductOption
ifstr(i) $(KeyProductOption) != ""
GetRegValue $(KeyProductOption) "ProductType" ProductTypeList
set TempProductType = *($(ProductTypeList),4)
ifstr(i) $(TempProductType) == "winnt"
set !STF_PRODUCT = WINNT
else-ifstr(i) $(TempProductType) == "lanmannt"
set !STF_PRODUCT = LANMANNT
else-ifstr(i) $(TempProductType) == "servernt"
set !STF_PRODUCT = SERVERNT
endif
CloseRegKey $(KeyProductOptions)
endif
Debug-Output "NCPASHEL.INF: STF_SRCDIR is "$(!STF_SRCDIR)
Debug-Output "NCPASHEL.INF: NTN_SRCPATH is "$(!NTN_SRCPATH)
Ifstr(i) $(!NTN_SRCPATH) != ""
Set !STF_ORIGINAL_SRCDIR = $(!STF_SRCDIR)
Set !STF_SRCDIR = $(!NTN_SRCPATH)
Debug-Output "NCPASHEL.INF: Reset STF_SRCDIR to:"$(!STF_SRCDIR)
Endif
Ifstr(i) $(!STF_SRCDIR) == ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "SourcePath" SourcePathValue
Set !STF_SRCDIR = *($(SourcePathValue),4)
Debug-Output "NCPASHEL.INF: SourcePath retrieved is "$(!STF_SRCDIR)
CloseRegKey $(KeyNt)
Endif
Ifstr(i) $(!STF_SRCDIR) == ""
Set !STF_SRCDIR = "A:\"
Endif
EndIf
Set SetupInp = 0
Set !NTN_InstallPhase = secondary
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\Setup" $(!REG_KEY_READ) KeySetup
Ifstr(i) $(KeySetup) != ""
GetRegValue $(KeySetup) "SystemSetupInProgress" SetupInpValue
Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
Set SetupInp = *($(SetupInpValue),4)
Debug-Output "NCPASHEL.INF: SetupInp = "$(SetupInp)
Endif
Ifint $(SetupInp) == 1
Set !NTN_InstallPhase = primary
GetRegValue $(KeySetup) "WinntPath" SetupPathValue
Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
Set !STF_SRCDIR_WINNT = *($(SetupPathValue),4)
Debug-Output "NCPASHEL.INF: STF_SRCDIR_WINNT = "$(!STF_SRCDIR_WINNT)
Endif
Endif
CloseRegKey $(KeySetup)
Endif
Debug-Output "NCPASHEL.INF: Setup phase = "$(!NTN_InstallPhase)
Ifstr(i) $(NTN_InfSection) == BindingsReview
Goto skipdetection
Endif
Ifstr(i) $(NTN_InstallMode) == install
Goto startdetection
Endif
Ifstr(i) $(NTN_InstallMode) == configure
Goto startdetection
Endif
Goto skipdetection
startdetection = +
Ifstr(i) $(!NCPA_HANDLE) != ""
Debug-Output "NCPASHEL.INF: Enable netcard detection from NCPA.CPL"
Shell "NCPARAM.INF" Param_ControlDetection DTSTART
Endif
skipdetection = +
ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I386)
set STF_PLATFORM = $(PlatformID_I386)
set SYS = $(ProcessorID_I386)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I486)
set STF_PLATFORM = $(PlatformID_I386)
set SYS = $(ProcessorID_I386)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I586)
set STF_PLATFORM = $(PlatformID_I386)
set SYS = $(ProcessorID_I386)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_R4000)
set STF_PLATFORM = $(PlatformID_Mips)
set SYS = $(ProcessorID_R4000)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_Alpha)
set STF_PLATFORM = $(PlatformID_Alpha)
set SYS = $(ProcessorID_Alpha)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_PPC601)
set STF_PLATFORM = $(PlatformID_PPC)
set SYS = $(ProcessorID_PPC601)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_PPC603)
set STF_PLATFORM = $(PlatformID_PPC)
set SYS = $(ProcessorID_PPC603)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_PPC604)
set STF_PLATFORM = $(PlatformID_PPC)
set SYS = $(ProcessorID_PPC604)
else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_PPC620)
set STF_PLATFORM = $(PlatformID_PPC)
set SYS = $(ProcessorID_PPC620)
else
set STF_PLATFORM = $(PlatformID_I386)
set SYS = $(ProcessorID_I386)
endif
Ifstr(i) $(!STF_LANGUAGE) != "ENG"
Debug-Output "NCPASHEL: Language not set to English; resetting"
!STF_LANGUAGE = "ENG"
Endif
read-syms ProgressCopy$(!STF_LANGUAGE)
Ifstr(i) $(!NTN_RegBase) == ""
set !NTN_RegBase = ""
Endif
set !NTN_ServiceBase = "SYSTEM\CurrentControlSet\SERVICES"
Ifstr(i) $(!NTN_InstallMode) == ""
Debug-Output "NCPASHEL:!NTN_InstallMode was not defined!"
set !NTN_InstallMode = "configure"
Endif
Ifstr(i) $(!NTN_SoftwareBase) == ""
set !NTN_SoftwareBase = "SOFTWARE"
Endif
set !NTN_Origination = "ncpa"
Ifstr(i) $(!NTN_Infname) == ""
goto fatalnoinfname
Endif
Ifstr(i) $(!NTN_InfSection) == ""
Set !NTN_InfSection = "InstallOption"
Endif
ifstr(i) $(!NTN_InstallMode) == "Update"
; Debug-Output "NCPASHEL.INF: Upgrade mode"
; Shell "" DoAskOemsetupSource $(!STF_SRCDIR)
; Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
; goto shellerror
; Endif
; ifstr(i) $($R0) == STATUS_SUCCESSFUL
; set !STF_SRCDIR = $($R1)
; else-ifstr(i) $($R0) == STATUS_USERCANCEL
; set Exit_Code = 1
; goto end
; else
; set Exit_Code = 2
; goto end
; endif
Set !NTN_Infname = $(!STF_SRCDIR)oemsetup.inf
endif
Ifstr(i) $(!NTN_InstallMode) == install
set AddCopy = YES
set DoCopy = YES
set DoConfig = YES
Else-ifstr(i) $(!NTN_InstallMode) == "Update"
set AddCopy = YES
set DoCopy = YES
set DoConfig = NO
Debug-Output "NCPASHEL.INF: Shell to "$(!NTN_Infname)
Shell $(!NTN_Infname) ReturnOptions $(!STF_LANGUAGE)
Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP--NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
goto shellerror
Endif
Ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
IfContains(i) $(!NTN_InfOption) in $($R1)
goto ContinueUpgrade
endif
endif
read-syms IncorrectOemsetupDisk$(!STF_LANGUAGE)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(ErrorText)
set Exit_Code = 1
goto end
ContinueUpgrade = +
Endif
ifstr(i) $(!NTN_SRCPATH) != ""
Set !STF_SRCDIR_OVERRIDE = $(!STF_SRCDIR)
Endif
Shell $(!NTN_Infname) $(!NTN_InfSection) +
$(!STF_LANGUAGE) $(!NTN_InfOption) +
$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)
Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
goto shellerror
Endif
Debug-Output "NCPASHEL: INF return: "$($R0)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
set Exit_Code = 0
else-ifstr(i) $($R0) == STATUS_USERCANCEL
set Exit_Code = 1
else-ifstr(i) $($R0) == STATUS_NO_EFFECT
set Exit_Code = 3
else-ifstr(i) $($R0) == STATUS_REBIND
set Exit_Code = 4
else-ifstr(i) $($R0) == STATUS_REBOOT
set Exit_Code = 5
else
set Exit_Code = 2
Endif
EndWait
goto end
shellerror = +
read-syms ShellError$(!$ShellCode)$(!STF_LANGUAGE)
Debug-Output "NCPASHEL: SHELL ERROR: "$(Error)
goto fatal
fatalnoinfname = +
set FatalErrorIndex = 2
goto fatalmsg
fatalmsg = +
read-syms FatalError$(FatalErrorIndex)$(!STF_LANGUAGE)
Debug-Output "NCPASHEL: FATAL ERROR: "$(Error)
goto fatal
fatal = +
read-syms FatalDlg$(!STF_LANGUAGE)
ui start "FatalError"
goto end
end = +
Ifstr(i) $(!LIBHANDLE) != ""
LibraryProcedure DontCare, $(!LIBHANDLE), DeleteAllConnections
Endif
Debug-Output "NCPASHEL: NCPASHEL: returning to NCPA"
goto term
term = +
Debug-Output "NCPASHEL: Bye."
exit
[Source Media Descriptions]
1 = "Windows NT Workstation CD-ROM" , TAGFILE = cdrom.w
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[LanguageID]
ENG
[LanguageTextENG]
"English (United States)"
[ProgressCopyENG]
ProCaption = "Windows NT Networking Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correctly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
PlatformID_I386 = I386
PlatformID_Mips = Mips
PlatformID_PPC = ppc
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"
DlgType = "MessageBox"
STF_MB_TEXT = $(Error)
STF_MB_TYPE = 1
STF_MB_ICON = 3
STF_MB_DEF = 1
[FatalError1ENG]
Error = "Initialization failed"
[FatalError2ENG]
Error = "No INF file name given (NTN_Infname)"
[FatalError3ENG]
Error = "Invocation of INF file "$(!NTN_Infname)" failed"
[ShellError1ENG]
Error = "INF file "$(!NTN_Infname)" does not exist"
[ShellError2ENG]
Error = "INF file "$(!NTN_Infname)" does not have a section named "$(!NTN_InfSection)
[ShellError3ENG]
Error = "INF file "$(!NTN_Infname)", section "$(!NTN_InfSection)" has syntax errors"
[DoAskUpgradeSrcDlgTextENG]
DlgText = "Please enter the full path for the upgrade/update "+
"OEMSETUP.INF file. Then choose Continue."
[IncorrectOemsetupDiskENG]
ErrorText = "Update aborted. The OEMSETUP.INF does not support upgrade for the specified component."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.