;\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ;\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ; ; ; OEMNSVWM.INF ; ; Novell Workstation Manager ; ; ;\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ;\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ; ; The following is the version info for Novell ; ;VeRsIoN=v4.71 Novell Workstation Manager for Windows NT (980305) ;CoPyRiGhT=copyright 1992-2000, by Novell, INC. All rights reserved. [Identification] OptionType = NetService [Options] WM [FileConstants] ; ; File names, etc. ; UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" NwSubsInf = "NWSUBS.INF" NwLangIdDll = "NWLANGID.DLL" NwSetupDll = "nwsetup.dll" SoftwareType = "service" Exit_Code = 0 ; ; Product Info ; Manufacturer = "Novell" UserModeRoot = "%SystemRoot%" System32Root = $(UserModeRoot)"\System32" SoftwareBinHome = $(System32Root)"\NetWare\" DriverBinHome = $(System32Root)"\Drivers\" NetWareEventFile = $(System32Root)"\nls\"$(NLSDirName)"\nwevents.dll" ; ; WM: Workstation Manager Service ; ProductWMControl = component ProductWMHidden = 0 ProductWMInstrumentation = TRUE ProductWMName = "WM" ProductWMImagePath = $(System32Root)\wm.exe ProductWMSvcType = "serviceauto" ProductWMGroup = "" ProductWMDependList = {"NetWareWorkstation"} ProductWMEventFile = $(NetWareEventFile) ; ; Registry key names ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductWMName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductWMName)"\Parameters" ServiceNameList = ^(ServiceNames, 1) UpdateServiceNameList = ^(UpdateServiceNames, 1) [ServiceNames] ; ; referenced by ServiceNameList ; SVC_1 = "WM" [UpdateServiceNames] ; ; referenced by UpdateRoutine ; SVC_1 = "WM" [GeneralConstants] ; ; Program Flow control variables ; from = "" to = "" ; ; Return Codes ; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" DriverPath = $(!STF_NTPATH)\drivers ; ; Product Info ; Manufacturer = "Novell" ProductMajorVersion = 4 ProductMinorVersion = 71 ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ;------------------------------------------------------------------------------ ; 1. Identify To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; Input: none ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette Description ;------------------------------------------------------------------------------ [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------------ ; 2. ReturnOptions To return the option list supported by this INF and ; the localized text list representing the options. ; Input: $($0): Lang. used (ENG | FRN | ....) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; $($R1): Option List ; $($R2): Option Text List ; ;------------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto returnoptions else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------------ ; 2. InstallOption This section is shelled to by main installation processing ; ; Function: To copy files representing Options ; To configure the installed option ; To update the Registry for the installed option ; ; Input: $($0): Lang. to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy ( YES | NO ) ; $($4): DoCopy ( YES | NO ) ; $($5): DoConfig ( YES | NO ) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; ;------------------------------------------------------------------------------ [InstallOption] Set !G:DebugOutputControl = 0 ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set OriginalAddCopy = $($3) set OriginalDoCopy = $($4) set OriginalDoConfig = $($5) Debug-OutPut "OEMNSVWM.INF: Option = "$($Option) Debug-OutPut "OEMNSVWM.INF: SrcDir = "$($SrcDir) Debug-OutPut "OEMNSVWM.INF: AddCopy = "$($AddCopy) Debug-OutPut "OEMNSVWM.INF: DoCopy = "$($DoCopy) Debug-OutPut "OEMNSVWM.INF: DoConfig = "$($DoConfig) set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms FileConstants$(!STF_LANGUAGE) read-syms InstallOption$(!STF_LANGUAGE) detect date ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto installoption else Debug-OutPut "OEMNSVWM.INF: Language not supported" set Status = STATUS_NOLANGUAGE goto end endif installoption = + ; ; This call checks the STF_ variables and sets the NWU variables. ; Shell "" UnattendedInstallOption ; ; Get the data from the Unattended file. ; ifstr(i) $(!NWUnattendedFile) != "" ifstr(i) $(!NWUnattendedSection) != "" Shell $(!NWUnattendedFile) ReadDefaultData, $(!NWUnattendedSection) ifstr(i) $($R0) != "STATUS_SUCCESSFUL" Debug-Output "Shell to read the NW Parameter values from an Unattend.txt file Failed." Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "Warning", $(UnattendFileReadFailed) ifstr(i) $($R1) == "CANCEL" set CommonStatus = STATUS_USERCANCEL goto end endif endif endif endif ifstr(i) $(!NWUnattendedFile) != "" ifstr(i) $(!NWWizard) != YES Debug-OutPut "OEMNSVWM.INF: !DoRemove = "$(!DoRemove) ifstr(i) $(!DoRemove) == YES set !NTN_InstallMode = deinstall else-Ifstr(i) $(!DoInstall) == NO Debug-OutPut "OEMNSVWM.INF: !DoInstall = "$(!DoInstall) set CommonStatus = STATUS_SUCCESSFUL goto end endif endif endif ; ; Must have the client installed first ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\NetWareWorkStation" $(MAXIMUM_ALLOWED) KeyProduct ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(NetWareClientNotInstalledMessage) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set CommonStatus = STATUS_USERCANCEL goto end endif CloseRegKey $(KeyProduct) ; ; Find what NLS directory is being used ; set NovellParameters = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Parameters" Debug-OutPut "OEMNSVWM.INF: NovellParameters is "$(NovellParameters) OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NLSDirName = *($(LanguageList), 4) else goto fatalregistry endif CloseRegKey $(KeyNovellParameters) else goto fatalregistry Endif ; ; Get NT version ; set CurrentVersion = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(CurrentVersion) $(MAXIMUM_ALLOWED) CurrentVersionKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(CurrentVersionKey) "CurrentVersion" VersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set VersionListData = *($(VersionList), 4) Split-string $(VersionListData) "." SplitVersionList Set NTMajorVersion = *($(SplitVersionList), 1) Set NTMinorVersion = *($(SplitVersionList), 3) Debug-OutPut "OEMNSVWM.INF: Windows NT current version is "$(VersionListData) Debug-OutPut "OEMNSVWM.INF: Windows NT Major version is "$(NTMajorVersion) Debug-OutPut "OEMNSVWM.INF: Windows NT Minor version is "$(NTMinorVersion) else Debug-Output "OEMNSVWM.INF: Error getting NT version" endif CloseRegKey $(CurrentVersionKey) else Debug-Output "OEMNSVWM.INF: Error opening "$(CurrentVersion) endif ; ; Is this an Advanced Server ; Debug-Output "OEMNSVWM.INF: Checking to see if advanced server" set AdvancedServer = "NO" Set TempKeyName = "SYSTEM\CurrentControlSet\Control\ProductOptions" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueName = "ProductType" GetRegValue $(TempKey) $(ValueName) ValueList Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set ValueListData = *($(ValueList), 4) set AdvancedServer = "YES" ifstr(i) $(ValueListData) == "WinNT" set AdvancedServer = "NO" Debug-Output "OEMNSVWM.INF: AdvancedServer is "$(AdvancedServer) endif else Debug-Output "OEMNSVWM.INF: Failed to get ProductType" endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVWM.INF: Failed to open ProductOptions key" endif ; ifstr(i) $(AdvancedServer) == "YES" ; set DlgType = "MessageBox" ; set STF_MB_TITLE = $(ErrorMessageTitle) ; set STF_MB_TEXT = $(NetWareWMOnASMessageText) ; set STF_MB_TYPE = 1 ; set STF_MB_ICON = 3 ; set STF_MB_DEF = 1 ; ui start "NetWareWMOnAS" ; ; set CommonStatus = STATUS_USERCANCEL ; goto end ; endif set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Debug-Output "OEMNSVWM.INF: Begin Install Mode = "$(!NTN_InstallMode) Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removewm else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = updatewm else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindwm else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configurewm else set StartLabel = installwm set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE ; ; Turn on all the options. ; ForListDo $(ServiceNameList) Set Do$($) = TRUE EndForListDo endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) ;****************************************** ; ; Install the Novell Workstation Manager ; ;****************************************** installwm = + Debug-Output "OEMNSVWM.INF: Installing WM" set AddCopy = "YES" set DoCopy = "YES" Ifstr(i) $(DoCopy) == "YES" AskSourceAgain = + ; ; Get source location ; Shell "", DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto end Endif Set SrcDir = $($R1) LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SrcDir) ifstr(i) $(STATUS) != "ERROR" set SrcDir = $(STATUS) Endif LibraryProcedure Status1, $(!LIBHANDLE), CheckFileExistance, $(SrcDir)nls\$(NLSDirName)"\oemnsvwm.inf" ifstr(i) $(Status1) != "YES" goto AskSourceAgain endif Endif ifstr(i) $(!Workstation_Manager_Tree) == "" Set !Workstation_Manager_Tree = $(!Workstation_Manager_Trusted_Trees) ; Temp until setupnw changes endif ifstr(i) $(!Workstation_Manager_Tree) == "" set TempKeyName = "SOFTWARE\Novell\Workstation Manager\Identification" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey) "Tree" TempTree Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set !Workstation_Manager_Tree = *($(TempTree), 4) Endif CloseRegKey $(TempKey) Endif endif ; ifstr(i) $(!Workstation_Manager_Tree) == "" ; set TempKeyName = "SYSTEM\CurrentControlSet\Services\NetWareWorkstation\Parameters" ; OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ; Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; GetRegValue $(TempKey) "Preferred Tree" TempTree ; Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; set EditTextIn = *($(TempTree), 4) ; Endif ; CloseRegKey $(TempKey) ; Endif ; ; LoadLibrary $(LoadDisk3Text) $(SrcDir)"nls\"$(NLSDirName)"\nwsetupr.dll" ResLibHandle ; SetHelpFile $(SrcDir)"nls\"$(NLSDirName)"\setupnw.hlp" $(!MinimumID) $(!MaximumID) ; read-syms WMTree$(!STF_LANGUAGE) ; ui start "WMTREE" $(ResLibHandle) ; ui pop 1 ; FreeLibrary $(ResLibHandle) ; ; ifstr(i) $(DLGEVENT) == "CONTINUE" ; set !Workstation_Manager_Tree = *($(EditTextOut),1) ; else ; Debug-Output "OEMNPRNW.INF: WM Tree CANCEL" ; endif ; endif set OEM_ABANDON_ON = TRUE StartWait ; ; Create file directories ; install "Install-Dirs" ; ; Copy all files to destination ; install "Install-Files" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif set AddCopy = $(OriginalAddCopy) set DoCopy = $(OriginalDoCopy) StartWait ; ; Install all enabled services mentioned in the ServiceNameList ; InstallEnabledServices = + ForListDo $(ServiceNameList) Set SvcOpt = $($) Set SoftwareOnly = FALSE ; ; Check to see if the product to be installed is already installed ; Set TempProductKeyName = $(!NTN_ServiceBase)"\"$(Product$(SvcOpt)Name) OpenRegKey $(!REG_H_LOCAL) "" $(TempProductKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: "$(SvcOpt)" is already installed" Set Do$(SvcOpt) = FALSE Endif Ifstr(i) $(SvcOpt) == "WM" Ifstr(i) $(Do$(SvcOpt)) == FALSE OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductWMName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Set Do$(SvcOpt) = TRUE Set SoftwareOnly = TRUE endif endif else CloseRegKey $(TempKey) endif Ifstr(i) $(Do$(SvcOpt)) == TRUE Ifstr(i) $(Product$(SvcOpt)Control) == component Ifstr(i) $(SoftwareOnly) == FALSE Debug-Output "OEMNSVWM.INF: install component: "$(SvcOpt) Shell $(UtilityInf), AddSoftwareComponent + $(Manufacturer), + $(Product$(SvcOpt)Name), + $(Product$(SvcOpt)Name), + $(Product$(SvcOpt)DisplayName), + "oemnsvwm.inf", + $(Product$(SvcOpt)ImagePath), + $(Product$(SvcOpt)SvcType), + $(Product$(SvcOpt)Group), + $(Product$(SvcOpt)DependList), "" + $(Product$(SvcOpt)EventFile), "", + $(Product$(SvcOpt)EventLocation), 1 Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: AddSoftwareComponent ShellCode error "$($ShellCode)" installing "$(SvcOpt) EndWait goto ShellCodeError Endif StartWait Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) Debug-Output "OEMNSVWM.INF: Registry error "$(RegistryErrorIndex)" installing "$(SvcOpt) EndWait goto fatalregistry Endif Set SvcVersion = $($R1) Set SvcNetRules = $($R2) Set SvcSvcKey = $($R3) Set SvcParamKey = $($R4) Set SvcLinkKey = $($R5) else Shell $(UtilityInf), InstallSoftwareProduct, $(Manufacturer), $(Product$(SvcOpt)Name), "oemnsvwm.inf" set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) == NO_ERROR set AS_KeyVersion = $($R1) set AS_KeyNetRules = $($R2) Shell $(UtilityInf), LinkToService, $(AS_KeyVersion), $(Product$(SvcOpt)Name), service set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif GetRegValue $(AS_KeyVersion),"RefCount", RefCountInfo Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) SetRegValue $(AS_KeyVersion) {RefCount,$(NoTitle),$(!REG_VT_DWORD),0} endif endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(Product$(SvcOpt)Name)"\CurrentVersion" $(MAXIMUM_ALLOWED) SvcVersion OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(Product$(SvcOpt)Name)"\CurrentVersion\NetRules" $(MAXIMUM_ALLOWED) SvcNetRules OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(Product$(SvcOpt)Name) $(MAXIMUM_ALLOWED) SvcSvcKey OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(Product$(SvcOpt)Name)"\Parameters" $(MAXIMUM_ALLOWED) SvcParamKey OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(Product$(SvcOpt)Name)"\Linkage" $(MAXIMUM_ALLOWED) SvcLinkKey endif ifint $(Product$(SvcOpt)ReviewBindings) == 1 Set ReviewBindingsValue = 1 else Set ReviewBindingsValue = 0 Endif Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(Product$(SvcOpt)SoftType)},+ {Hidden,$(NoTitle),$(!REG_VT_DWORD),$(Product$(SvcOpt)Hidden)},+ {Review,$(NoTitle),$(!REG_VT_DWORD),$(ReviewBindingsValue)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(Product$(SvcOpt)DisplayName)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(Product$(SvcOpt)DisplayName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(Product$(SvcOpt)Name)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SvcVersion), $(NewValueList) StartWait Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: ShellCode error: AddValueList for version info for "$(SvcOpt) EndWait goto ShellCodeError Endif ; ; Add the NetRules info ; Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(SvcOpt)SoftwareType)},+ {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRule$(SvcOpt)SoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRule$(SvcOpt)SoftwareBindable)}, + {use,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(SvcOpt)SoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(SvcOpt)SoftwareBindForm)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(SvcOpt)}} Shell $(UtilityInf), AddValueList, $(SvcNetRules), $(NewValueList) StartWait Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: AddValueList ShellCode error = "$($ShellCode) EndWait Goto ShellCodeError Endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR CloseRegKey $(SvcSvcKey) CloseRegKey $(SvcParamKey) CloseRegKey $(SvcLinkKey) CloseRegKey $(SvcVersion) CloseRegKey $(SvcNetRules) Debug-Output "OEMNSVWM.INF: Registry error adding NetRules to "$(SvcOpt) EndWait goto fatalregistry Endif Else Debug-Output "OEMNSVWM.INF: install service: "$(SvcOpt) Shell $(UtilityInf), CreateService, + $(Product$(SvcOpt)Name), + $(Product$(SvcOpt)DisplayName), + $(Product$(SvcOpt)ImagePath), + $(Product$(SvcOpt)SvcType), + $(Product$(SvcOpt)Group), + $(Product$(SvcOpt)DependList), "" + $(Product$(SvcOpt)EventFile), "", "", 1 StartWait Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: ShellCode error installing "$(SvcOpt) EndWait goto ShellCodeError Endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) Debug-Output "OEMNSVWM.INF: Registry error installing "$(SvcOpt) EndWait goto fatalregistry Endif Set SvcVersion = "" Set SvcNetRules = "" Set SvcSvcKey = $($R1) Set SvcParamKey = $($R2) Set SvcLinkKey = $($R3) Endif ; ; Add the NetWare Instrumentation Level. ; Ifstr(i) $(Product$(SvcOpt)Instrumentation) == TRUE SetRegValue $(SvcParamKey) {"Instrumentation Level",$(NoTitle),$(!REG_VT_SZ),"NONE"} Endif ; ; Call the service-specific installation section ; Shell "" FinishInstalling-$(SvcOpt) + $(SvcSvcKey) $(SvcParamKey) $(SvcLinkKey) + $(SvcVersion) $(SvcNetRules) $(TransportSelected) StartWait Ifstr(i) $(SvcVersion) != "" CloseRegKey $(SvcVersion) Endif Ifstr(i) $(SvcNetRules) != "" CloseRegKey $(SvcNetRules) Endif CloseRegKey $(SvcSvcKey) CloseRegKey $(SvcParamKey) CloseRegKey $(SvcLinkKey) ; ; Add this service to the list of "undoable" things in case of failure ; Set OEM_ABANDON_SERVICES = >($(OEM_ABANDON_SERVICES), $(Product$(SvcOpt)Name)) Endif skipservice = + EndForListDo Ifstr(i) $(CalledFromUpdate) == "YES" goto ReturnToUpdate endif ; ; Install various registry parameters ; Install Install-Parameters ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError else-ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVWM: User Canceled due to a error processing the Unattended Variables." set CommonStatus = STATUS_USERCANCEL goto setfailed endif goto end ;********************************************* ; ; Configure the Novell Workstation Manager ; ;********************************************* configurewm = + Debug-Output "OEMNSVWM.INF: Configuring WM" ; ; Configure WM. ; StartWait LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\nwsetup.dll" NwLibHandle SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\setupnw.hlp" $(!MinimumID) $(!MaximumID) set HelpContext = $(IDH_NETWAREWRKSTATIONPARMS) LibraryProcedure LibResult $(NwLibHandle) NWConfigure $(Option) Debug-Output "OEMNSVWM.INF: NWConfigure returned "$(LibResult) ifstr(i) $(LibResult) != "CONTINUE" set CommonStatus = STATUS_USERCANCEL endif FreeLibrary $(NwLibHandle) goto end ;******************************************************* ; ; Review bindings for the Novell Workstation Manager ; ;******************************************************* bindwm = + Debug-Output "OEMNSVWM.INF: Binding WM" goto end ;****************************************** ; ; Remove the Novell Workstation Manager ; ;****************************************** removewm = + ; ; Remove NALNTSERVICE and Novell WUser Agent dependencies on WM ; Shell "oemnprnw.inf" RemoveServiceDependency "NALNTSERVICE" "WM" Shell "oemnprnw.inf" RemoveServiceDependency "Novell WUser Agent" "WM" Shell "oemnprnw.inf" RemoveServiceDependency "KBSTUFF" "WM" Debug-Output "OEMNSVWM.INF: Removing WM" ForListDo $(ServiceNameList) Set SvcOpt = $($) Ifstr(i) $(Product$(SvcOpt)Control) == component Debug-Output "OEMNSVWM.INF: remove component: "$(SvcOpt) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(Product$(SvcOpt)Name) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode)" installing "$(SvcOpt) EndWait goto ShellCodeError Endif Else Debug-Output "OEMNSVWM.INF: remove service: "$(SvcOpt) Shell $(UtilityInf), RemoveService, $(Product$(SvcOpt)Name), YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: ShellCode error removing "$(SvcOpt) EndWait goto ShellCodeError Endif Endif EndForListDo Set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer) OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Deleting all our WM software" DeleteRegTree $(TempKey) "Workstation Manager" ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to delete Netware WM registry tree" endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVWM.INF: Failed to open software key to delete old software" endif ; set the scheduler icon to off set TempKeyName = "SOFTWARE\Novell\Network Provider\Menu Items" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"Enable Scheduler Icon", $(NoTitle), $(!REG_VT_SZ), "no"} CloseRegKey $(TempKey) Endif LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\"$(NwSetupDll) NwLibHandle Debug-Output "OEMNSVWM.INF: Deleting all our WM files" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wm.exe" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wminv.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmuspol.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmdtpol.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmprtnt.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmcchlpr.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmsched.exe" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmrundll.exe" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmsched.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\wmrasm.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\wmschedr.dll" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\wmsched.hlp" LibraryProcedure GUIResult $(NwLibHandle) NWDeleteFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\wmgr32.hlp" FreeLibrary $(NwLibHandle) goto end ;****************************************** ; ; Update the Novell Workstation Manager ; ;****************************************** updatewm = + ; ; Mark for no upgrade allowed by default ; Set CanUpgrade = "NO" ; ; Check the current version. Allow upgrade if current version is equal ; to or greater than installed version. ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductWMName)"\CurrentVersion" $(MAXIMUM_ALLOWED) WMCurrVer Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(WMCurrVer) "MajorVersion" MajorVersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set WMMajorVersion = *($(MajorVersionList), 4) endif GetRegValue $(WMCurrVer) "MinorVersion" MinorVersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set WMMinorVersion = *($(MinorVersionList), 4) endif Debug-OutPut "Installed WM Major version is "$(WMMajorVersion) Debug-OutPut "Installed WM Minor version is "$(WMMinorVersion) ifint $(ProductMajorVersion) == $(WMMajorVersion) ifint $(ProductMinorVersion) >= $(WMMinorVersion) set CanUpgrade = "YES" endif else ifint $(ProductMajorVersion) > $(WMMajorVersion) set CanUpgrade = "YES" endif endif CloseRegKey $(WMCurrVer) Endif ; ; Check the upgrade flag to see if upgrade allowed. ; ifstr(i) $(CanUpgrade) == "NO" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(UpgradeButtonMessage) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set CommonStatus = STATUS_USERCANCEL goto end endif Debug-Output "OEMNSVWM.INF: Updating WM" set AddCopy = "YES" set DoCopy = "YES" Ifstr(i) $(DoCopy) == "YES" AskSourceAgain = + ; ; Get source location ; set OldSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE) set !STF_SRCDIR_OVERRIDE = $(SrcDir) Shell "", DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto end Endif Set SrcDir = $($R1) LibraryProcedure STATUS, $(!LIBHANDLE), AppendBackSlash $(SrcDir) ifstr(i) $(STATUS) != "ERROR" set SrcDir = $(STATUS) Endif LibraryProcedure Status1, $(!LIBHANDLE), CheckFileExistance, $(SrcDir)nls\$(NLSDirName)"\oemnsvwm.inf" ifstr(i) $(Status1) != "YES" goto AskSourceAgain endif Endif ifstr(i) $(!Workstation_Manager_Tree) == "" Set !Workstation_Manager_Tree = $(!Workstation_Manager_Trusted_Trees) ; Temp until setupnw changes endif ifstr(i) $(!Workstation_Manager_Tree) == "" set TempKeyName = "SOFTWARE\Novell\Workstation Manager\Identification" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey) "Tree" TempTree Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set !Workstation_Manager_Tree = *($(TempTree), 4) Endif CloseRegKey $(TempKey) Endif endif ; ifstr(i) $(!Workstation_Manager_Tree) == "" ; set TempKeyName = "SYSTEM\CurrentControlSet\Services\NetWareWorkstation\Parameters" ; OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ; Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; GetRegValue $(TempKey) "Preferred Tree" TempTree ; Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; set EditTextIn = *($(TempTree), 4) ; Endif ; CloseRegKey $(TempKey) ; Endif ; LoadLibrary $(LoadDisk3Text) $(SrcDir)"nls\"$(NLSDirName)"\nwsetupr.dll" ResLibHandle ; SetHelpFile $(SrcDir)"nls\"$(NLSDirName)"\setupnw.hlp" $(!MinimumID) $(!MaximumID) ; read-syms WMTree$(!STF_LANGUAGE) ; ui start "WMTREE" $(ResLibHandle) ; ui pop 1 ; FreeLibrary $(ResLibHandle) ; ifstr(i) $(DLGEVENT) == "CONTINUE" ; set !Workstation_Manager_Tree = *($(EditTextOut),1) ; else ; Debug-Output "OEMNPRNW.INF: WM Tree CANCEL" ; endif ; endif ; ; Create destination directories ; install "Install-Dirs" ; ; Copy all files to destination ; set AddCopy = "YES" set DoCopy = "YES" Install "Install-Files" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif set AddCopy = $(OriginalAddCopy) set DoCopy = $(OriginalDoCopy) ForListDo $(UpdateServiceNameList) Set UpdateSvcOpt = $($) ; ; Check to see if the product to be fixed is there ; Set ProductKeyName = $(!NTN_ServiceBase)"\"$(Product$(UpdateSvcOpt)Name) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) ProductKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: "$(UpdateSvcOpt)" is installed, fix it up" ; ; Update the product software information ; Set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(Product$(UpdateSvcOpt)Name)"\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; ; Set the new major version number ; SetRegValue $(TempKey) {"MajorVersion", $(NoTitle), $(!REG_VT_DWORD), $(ProductMajorVersion)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set new major version info for "$(UpdateSvcOpt) endif ; ; Set the new minor version number ; SetRegValue $(TempKey) {"MinorVersion", $(NoTitle), $(!REG_VT_DWORD), $(ProductMinorVersion)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set new minor version info for "$(UpdateSvcOpt) endif ; ; Set the new description and title ; SetRegValue $(TempKey) {"Description", $(NoTitle), $(!REG_VT_SZ), $(Product$(UpdateSvcOpt)DisplayName)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to update Description for "$(UpdateSvcOpt) endif SetRegValue $(TempKey) {"Title", $(NoTitle), $(!REG_VT_SZ), $(Product$(UpdateSvcOpt)DisplayName)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to update Title for "$(UpdateSvcOpt) endif ; ; Close the key ; CloseRegKey $(TempKey) else Debug-Output "OEMNSVWM.INF: Failed to open key "$(TempKeyName) endif ; ; Fix the display name ; SetRegValue $(ProductKey) {"DisplayName", $(NoTitle), $(!REG_VT_SZ), $(Product$(UpdateSvcOpt)DisplayName)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to update DisplayName for "$(UpdateSvcOpt) endif ; ; Close the first key ; CloseRegKey $(ProductKey) endif EndForListDo ; ; Set up to install any services that were not part of a previous client. ; ForListDo $(ServiceNameList) Set Do$($) = TRUE EndForListDo set CalledFromUpdate = "YES" goto InstallEnabledServices ReturnToUpdate = + ; ; Install various registry parameters ; Install Install-Parameters ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError else-ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVWM: User Canceled due to a error processing the Unattended Variables." set CommonStatus = STATUS_USERCANCEL goto setfailed endif set !STF_SRCDIR_OVERRIDE = $(OldSTF_SRCDIR_OVERRIDE) goto end ;****************************************** ; ; Common exit section ; ;****************************************** abandon = + Debug-Output "OEMNSVWM.INF: abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: RemoveHardwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVWM.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatal = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) $(DriverToLoad) ;----------------------------------------------------------------------- ; ; ; Additional installation and update processing for services ; ; ;----------------------------------------------------------------------- [FinishInstalling-WM] Debug-Output "FinishInstalling-WM" set KeyWM = $($0) FlushRegKey $(KeyWM) Ifstr(i) $(KeyWM) != "" Debug-Output "Opened Key WM" SetRegValue $(KeyWM) {"TextModeFlags",$(NoTitle),$(!REG_VT_DWORD),1} Endif Endif Return ;----------------------------------------------------------------------- ; ; SECTION: Install-Files ; ; PURPOSE: Called at install or update to copy ; files to the system ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;----------------------------------------------------------------------- [Install-Dirs] Debug-Output "OEMNSVWM.INF: Creating file directories" Exit [Install-Files] Debug-Output "OEMNSVWM.INF: Installing files" set STF_VITAL = "" Ifstr(i) $(AddCopy) == "YES" ; ; Add the files to the copy list ; AddSectionFilesToCopyList Files-Inf-$(NLSDirName) $(SrcDir)nls\$(NLSDirName) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Hlp-Sys32-$(NLSDirName) $(SrcDir)nls\$(NLSDirName) $(!STF_WINDOWSSYSPATH)\nls\$(NLSDirName) AddSectionFilesToCopyList Files-Res-Sys32-$(NLSDirName) $(SrcDir)nls\$(NLSDirName) $(!STF_WINDOWSSYSPATH)\nls\$(NLSDirName) AddSectionFilesToCopyList Files-System32 $(SrcDir)redir $(!STF_WINDOWSSYSPATH) Debug-Output "OEMNSVWM.INF: Files added to list" Endif Ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE set !STF_NETCANCELOVERIDE = "YES" ; this line removes the cancel button CopyFilesInCopyList Debug-Output "OEMNSVWM.INF: Files copied" LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\"$(NwSetupDll) NwLibHandle LibraryProcedure LibResult $(NwLibHandle) NWRenameFile $(!STF_WINDOWSSYSPATH)"\wm.ex~" $(!STF_WINDOWSSYSPATH)"\wm.exe" FreeLibrary $(NwLibHandle) Endif Exit ;****************************************** ; ; File copy information ; ;****************************************** [Source Media Descriptions] 1 = "Novell Client for Windows NT Setup Disk 3", TAGFILE = NWC_3 [Files-Inf-English] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Chineses] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Chineset] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Deutsch] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Espanol] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Francais] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Italiano] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Korean] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Nihongo] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Portugue] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Inf-Russki] 1, oemnsvwm.inf, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-English] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-English] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Chineses] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Chineses] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Chineset] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Chineset] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Deutsch] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Deutsch] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Espanol] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Espanol] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Francais] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Francais] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Italiano] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Italiano] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Korean] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Korean] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Nihongo] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Nihongo] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Portugue] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Portugue] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-Hlp-Sys32-Russki] 1, wmsched.hlp, SIZE=50000, DECOMPRESS 1, wmgr32.hlp, SIZE=50000, DECOMPRESS [Files-Res-Sys32-Russki] 1, wmschedr.dll, SIZE=50000, DECOMPRESS [Files-System32] 1, wm.exe, SIZE=50000, DECOMPRESS, RENAME=wm.ex~ 1, wminv.dll, SIZE=50000, DECOMPRESS 1, wmuspol.dll, SIZE=50000, DECOMPRESS 1, wmdtpol.dll, SIZE=50000, DECOMPRESS 1, wmprtnt.dll, SIZE=50000, DECOMPRESS 1, wmcchlpr.dll, SIZE=50000, DECOMPRESS 1, wmsched.exe, SIZE=50000, DECOMPRESS 1, wmrundll.exe, SIZE=50000, DECOMPRESS 1, wmsched.dll, SIZE=50000, DECOMPRESS 1, wmrasm.dll, SIZE=50000, DECOMPRESS 1, wmpolhlp.dll, SIZE=50000, DECOMPRESS ;----------------------------------------------------------------------- ; ; SECTION: Install-Parameters ; ; PURPOSE: Called at install or update to add ; various parameters to the registry ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;----------------------------------------------------------------------- [Install-Parameters] set SoftwareNovell = $(!NTN_SoftwareBase)"\"$(Manufacturer) OpenRegKey $(!REG_H_LOCAL) "" $(SoftwareNovell) $(MAXIMUM_ALLOWED) KeySoftwareNovell ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNPRNW.INF: Error opening "$(SoftwareNovell) Else set NovellWM = "Workstation Manager" OpenRegKey $(KeySoftwareNovell) "" $(NovellWM) $(MAXIMUM_ALLOWED) KeyNovellWM ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeySoftwareNovell) {$(NovellWM), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNovellWM ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Error creating Software\Novell\Workstation Manager" Endif Endif set NovellParameters = "Identification" OpenRegKey $(KeyNovellWM) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNovellWM) {$(NovellParameters), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNovellParameters ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Error creating Software\Novell\Workstation Manager\Identification" Endif Endif set PredesktopHlprs = "PredesktopHelperDLLs" OpenRegKey $(KeyNovellWM) "" $(PredesktopHlprs) $(MAXIMUM_ALLOWED) KeyPredesktopHlprs ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNovellWM) {$(PredesktopHlprs), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyPredesktopHlprs ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Error creating Software\Novell\Workstation Manager\PredesktopHelperDLLs" Endif Endif Endif Ifstr(i) $(KeyNovellWM) != "" ; set EnableWM = 1 ; Ifstr(i) $(!Workstation_Manager_Tree) == "" ; set EnableWM = 0 ; endif SetRegValue $(KeyNovellWM) {"Enabled", $(NoTitle), $(!REG_VT_DWORD), 1} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WM enabled value" endif Endif Ifstr(i) $(KeyNovellParameters) != "" ifstr(i) $(!Workstation_Manager_Tree) != "" SetRegValue $(KeyNovellParameters) {"Tree", $(NoTitle), $(!REG_VT_SZ), $(!Workstation_Manager_Tree)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WM Tree value" endif Endif CloseRegKey $(KeyNovellParameters) Endif Ifstr(i) $(KeyPredesktopHlprs) != "" SetRegValue $(KeyPredesktopHlprs) {"WMUSPOL.DLL", $(NoTitle), $(!REG_VT_SZ), "WMUSPOL.DLL"} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WMUSPOL.DLL value" endif SetRegValue $(KeyPredesktopHlprs) {"WMPRTNT.DLL", $(NoTitle), $(!REG_VT_SZ), "WMPRTNT.DLL"} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WMPRTNT.DLL value" endif SetRegValue $(KeyPredesktopHlprs) {"WMPOLHLP.DLL", $(NoTitle), $(!REG_VT_SZ), "WMPOLHLP.DLL"} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WMPOLHLP.DLL value" endif SetRegValue $(KeyPredesktopHlprs) {"WMPM.DLL", $(NoTitle), $(!REG_VT_SZ), "WMPM.DLL"} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Failed to set WMPM.DLL value" endif CloseRegKey $(KeyPredesktopHlprs) Endif Ifstr(i) $(!Workstation_Manager_Tree) != "" ;If there is no Preferred Tree, then set it ; to the Trusted Tree. set TempKeyName = "SYSTEM\CurrentControlSet\Services\NetWareWorkstation\Parameters" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey) "Preferred Tree" TempTree Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"Preferred Tree", $(NoTitle), $(!REG_VT_SZ), $(!Workstation_Manager_Tree)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNPRNW.INF: Failed to set Preferred Tree value" endif else Ifstr(i) *($(TempTree),4) == "" SetRegValue $(TempKey) {"Preferred Tree", $(NoTitle), $(!REG_VT_SZ), $(!Workstation_Manager_Tree)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNPRNW.INF: Failed to set Preferred Tree value" endif endif Endif Set TempKeyName2 = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Location Profiles\Services\{1E6CEEA1-FB73-11CF-BD76-00001B27DA23}\Default\Tab1" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName2) $(MAXIMUM_ALLOWED) TempKey2 Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey2) "Tree" TempTree2 Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey) "Preferred Tree" TempTree Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey2) {"Tree", $(NoTitle), $(!REG_VT_SZ), *($(TempTree),4)} Endif else Ifstr(i) *($(TempTree2),4) == "" GetRegValue $(TempKey) "Preferred Tree" TempTree Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey2) {"Tree", $(NoTitle), $(!REG_VT_SZ), *($(TempTree),4)} Endif endif Endif CloseRegKey $(TempKey2) Endif CloseRegKey $(TempKey) Endif Endif Ifstr(i) $(KeyNovellWM) != "" CloseRegKey $(KeyNovellWM) Endif Ifstr(i) $(KeySoftwareNovell) != "" CloseRegKey $(KeySoftwareNovell) Endif ; ; HKEY_LOCAL_MACHINE\Software\Novell\WM\CurrentVersion ; set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\WM\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; ; Set internal versions ; set HaveInternalVersion = YES ifint $(!MajorInternalVersion) == 0 ifint $(!MinorInternalVersion) == 0 set HaveInternalVersion = NO endif endif ifstr(i) $(HaveInternalVersion) == NO DeleteRegValue $(TempKey) "MajorInternalVersion" DeleteRegValue $(TempKey) "MinorInternalVersion" else SetRegValue $(TempKey) {"MajorInternalVersion", $(NoTitle), $(!REG_VT_DWORD), $(!MajorInternalVersion)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Unable to update MajorInternalVersion value in "$(TempKeyName) endif SetRegValue $(TempKey) {"MinorInternalVersion", $(NoTitle), $(!REG_VT_DWORD), $(!MinorInternalVersion)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVWM.INF: Unable to update MinorInternalVersion value in "$(TempKeyName) endif endif CloseRegKey $(TempKey) endif RemoveCommonProgManItem $(NetWareGroup) $(OldSchedIconText) RemoveCommonProgManItem $(NetWareGroup) $(OldSchedIconText2) RemoveCommonProgManItem $(NetWareGroup) $(SchedIconText) CreateCommonProgManItem $(NetWareGroup), $(SchedIconText) "%SystemRoot%\system32\wmsched.exe" "" 0 Exit ;----------------------------------------------------------------------- ; ; SECTION: DoAskSource ; ; PURPOSE: Called at install and update time to ; prompt for the source location ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;----------------------------------------------------------------------- [DoAskSource] read-syms GeneralConstants read-syms FileConstants read-syms FileConstants$(!STF_LANGUAGE) read-syms InstallOption$(!STF_LANGUAGE) read-syms DoAskSource$(!STF_LANGUAGE) Set DAS_CWDDIR = $($0) Set DAS_SRCDIR = $($1) Set DAS_BUILTIN = $($2) Set DAS_Result = STATUS_FAILED Ifstr(i) $(!STF_SRCDIR_OVERRIDE) != "" Set DAS_SRCDIR = $(!STF_SRCDIR_OVERRIDE) Set DAS_Result = STATUS_SUCCESSFUL Goto DAS_exit Endif Ifstr(i) $(DAS_BUILTIN) == YES Ifstr(i) $(!NTN_InstallPhase) == primary Ifstr(i) $(!STF_SRCDIR_WINNT) != "" Set DAS_SRCDIR = $(!STF_SRCDIR_WINNT) Endif Set DAS_Result = STATUS_SUCCESSFUL Goto DAS_exit Endif Else set SourcePathName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(SourcePathName) $(MAXIMUM_ALLOWED) SourcePathKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(SourcePathKey) "SourcePath" SourcePathList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set SourcePath = *($(SourcePathList), 4) ifstr(i) $(DAS_SRCDIR) == $(SourcePath) set NWSourcePathName = $(!NTN_SoftwareBase)"\Novell\NetWareWorkstation\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(NWSourcePathName) $(MAXIMUM_ALLOWED) NWSourcePathKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(NWSourcePathKey) "SourcePath" NWSourcePathList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NWSourcePath = *($(NWSourcePathList), 4) ifstr(i) $(NWSourcePath) != "" set DAS_SRCDIR = $(NWSourcePath) endif endif CloseRegKey $(NWSourcePathKey) endif endif endif CloseRegKey $(SourcePathKey) endif Endif Debug-Output "OEMNXPGW.INF: [DoAskSource] STF_CWDDIR = "$(DAS_CWDDIR)" STF_SRCDIR = "$(DAS_SRCDIR) Ifstr(i) $(DAS_SRCDIR) == "" Set DAS_SRCDIR = "A:\" Endif Ifstr(i) $(DAS_SRCDIR) == $(!STF_SRCDIR_USED) Set DAS_SRCDIR = $(!STF_SRCDIR_KEYED) Endif Shell "subroutn.inf" DoAskSourceEx $(DAS_SRCDIR) $(NetWareDlgText) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNXPGW.INF: shelling SUBROUTN.INF [DoAskSource] failed" goto DAS_exit endif Set DAS_Result = $($R0) Set DAS_SRCDIR = $($R1) Set !STF_SRCDIR_USED = $($R1) Set !STF_SRCDIR_KEYED = $($R3) DAS_exit =+ Read-syms ProgressCopy$(!STF_LANGUAGE) Return $(DAS_Result) $(DAS_SRCDIR) ;----------------------------------------------------------------------- ; ; ; SECTION: UnattendedInstallOption: ; ; PURPOSE: This section is shelled to by the Install Option. It looks at the three MS Unattended variables and then ; sets the Novell specific variable for NWACU and the NWUnattended file. ; Our install for both setup.exe /ACU and Unattended install from MS then uses NWACU and the NWUnattended variables. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;----------------------------------------------------------------------- [UnattendedInstallOption] read-syms GeneralConstants read-syms FileConstants ifstr(i) $(!STF_GUI_UNATTENDED) == "NO" ifstr(i) $(!STF_UNATTENDED) == "YES" set !NWACU = "YES" endif else-ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!NWUnattendedFile) == "" set !NWACU = "YES" set !NWUnattendedFile = $(!STF_UNATTENDED) set !NWUnattendedSection = $(!STF_UNATTENDED_SECTION) else-ifstr(i) $(!STF_UNATTENDED_SECTION) != "" set !NWUnattendedSection = $(!STF_UNATTENDED_SECTION) endif endif Return ;************************************************************************* ;----------Write-Unattended-Variables----------------------------------- ; ; ; SECTION: Write-Unattended-Variables: ; ; PURPOSE: This section writes the unattended variables to the ; registry. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: Called at end of install section and the update section ; ; MODIFIES: None ; ;************************************************************************* [Write-Unattended-Variables] read-syms GeneralConstants read-syms FileConstants read-syms InstallOption$(!STF_LANGUAGE) ; If the /U parameter is passed from Setupnw.exe then call this section to set the defaults. ; Add the values in the unattended file to the registry. set UnattendReturnStatus = STATUS_SUCCESSFUL ifstr(i) $(!NWUnattendedFile) != "" LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\"$(NwSetupDll) NwLibHandle SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(!P:NLSDirName)"\nt4setup.hlp" $(!MinimumID) $(!MaximumID) LibraryProcedure LibResult $(NwLibHandle) NWUnattendedInstall $(!NWUnattendedFile) $(!P:Option) FreeLibrary $(NwLibHandle) endif Return $(UnattendReturnStatus) ;----------------------------------------------------------------------- ; LANGUAGES SUPPORTED ; ------------------- ; ; The languages supported by the OEM INF, For every language supported ; we need to have a separate text section for every displayable text ; section. ; ;----------------------------------------------------------------------- [LanguagesSupported] ENG, ENGLISH [OptionsTextENG] WM = "Novell Workstation Manager" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cance&l" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ; ; Producer Info ; FunctionTitle = "Novell Workstation Manager" ; ; Service Info ; ProductWMDisplayName = "Novell Workstation Manager" ProductWMDescription = "Novell Workstation Manager allows administrators to configure and manage workstations using NDS." ; ; Variables to support thermometer gauge and error dialogs ; ProCaption = "Novell Workstation Manager for Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Novell Workstation Manager for Windows NT is not "+ "correctly installed. Are you sure you want to cancel "+ "copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" [ProgressCopyENG] !p:ProCaption = "Novell Workstation Manager for Windows NT Setup" !p:ProCancel = "Cancel" !p:ProCancelMsg = "Novell Workstation Manager for Windows NT is not "+ "correctly installed. Are you sure you want to cancel "+ "copying files?" !p:ProCancelCap = "Setup Message" !p:ProText1 = "Copying:" !p:ProText2 = "To:" !p:Error = "Unable to determine proper source disk location; copy cannot be performed." [InstallOptionENG] ErrorMessageTitle = "Novell Workstation Manager Install Error" ShellCodeErrorTitle = "Error: Novell Workstation Manager Install" ShellCodeErrorText = "Shell Code Error" LoadDisk3Text = "Please load the Novell Client for Windows NT "+ "disk 3 into drive " NetWareClientNotInstalledMessage = "You must install the Novell Client for Windows NT before this product can be installed." NetWareGroup = "Novell" SchedIconText = "Novell Scheduler" OldSchedIconText = "IntranetWare Scheduler" OldSchedIconText2 = "NetWare Scheduler" NetWareWMOnASMessageText = "Novell Workstation Manager is only supported with the "+ "workstation versions of Microsoft Windows NT. It is NOT supported "+ "with the Advanced Server versions." UnattendFileReadFailed = "Read File Error while trying to read and "+ "initialize either the Novell ACU options and/or the Novell Client parameters "+ "from the Unattended file. The Novell Client parameters will not "+ "be set in the registry, and any ACU installation options will not "+ "install. Press CANCEL to Abort the installation and correct the "+ "syntax errors in the UNATTEND.TXT file. Press OK to manually "+ "complete the install of the Novell NT Client without setting the "+ "Client parameters." UpgradeButtonMessage = "The Workstation Manager version you are installing is older "+ "than the Workstation Manager that is currently installed. You must remove it "+ "and then reboot before installing an older version." [DoAskSourceENG] NetWareDlgText = "Please enter the full path to the Novell "+ "Client for Windows NT distribution files. Then choose Continue." [WMTreeENG] IDH_TRUSTEDTREE = 961 Label1 = "Enter the &Workstation Manager tree:" Caption = "Workstation Manager Setup" OK = "OK" Help = "Help" ; DO NOT LOCALIZE THE FOLLOWING STRINGS DlgType = "Edit" DlgTemplate = "EDIT1" HelpContext = $(IDH_TRUSTEDTREE) EditTextLim = 64 EditFocus = "ALL" RCCtlFocusOn = 581Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.