[info] drivername=OdiLoad symbolfile=odistats.h [languages] 009=English [text] ODI_STATS_009_NAME=NetWare ODI Stats ODI_STATS_009_HELP=Displays statistics about NetWare ODI TOTAL_TX_PACKET_COUNT_009_NAME=Total transmitted packets/sec TOTAL_TX_PACKET_COUNT_009_HELP=Displays the number of packets successfully transmitted onto the media/sec TOTAL_RX_PACKET_COUNT_009_NAME=Total received packets/sec TOTAL_RX_PACKET_COUNT_009_HELP=Displays the number of packets reported as successfully received without errors/sec. This counter is independent of whether the packet is accepted by a host. NO_ECB_AVAILABLE_COUNT_009_NAME=No ECB available count NO_ECB_AVAILABLE_COUNT_009_HELP=Displays the number of times an incoming packet was discarded due to the lack of host receive buffers or the host not wanting the packet. PACKET_TX_TOO_BIG_COUNT_009_NAME=Transmit packet too big count PACKET_TX_TOO_BIG_COUNT_009_HELP=Displays the number of times a send packet was too big for transmission. PACKET_TX_TOO_SMALL_COUNT_009_NAME=Transmit packet too small count PACKET_TX_TOO_SMALL_COUNT_009_HELP=Displays the number of requested packets for transmission that were normally too small to be transmitted. The packets might still have been sent if the MLID does padding. PACKET_RX_OVERFLOW_COUNT_009_NAME=Receive buffer overflow count PACKET_RX_OVERFLOW_COUNT_009_HELP=Displays the number of times the adapter's receive buffer pool was exhausted, which caused subsequent incoming packets to be discarded. PACKET_RX_TOO_BIG_COUNT_009_NAME=Receive packet too big count PACKET_RX_TOO_BIG_COUNT_009_HELP=Displays the number of times a packet was received that was too large to fit into preallocated receive buffers provided by the host or too large for media definitions. PACKET_RX_TOO_SMALL_COUNT_009_NAME=Receive packet too small count PACKET_RX_TOO_SMALL_COUNT_009_HELP=Displays the number of times a packet was received the was too small for media definitions. TOTAL_TX_MISC_COUNT_009_NAME=Total miscellaneous transmit failures TOTAL_TX_MISC_COUNT_009_HELP=Displays the number of times a packet failed to transmit for reasons unknown. TOTAL_RX_MISC_COUNT_009_NAME=Total miscellaneous receive failures TOTAL_RX_MISC_COUNT_009_HELP=Displays the number of times a packet failed to be received for reasons unknown. RETRY_TX_COUNT_009_NAME=Transmit retries RETRY_TX_COUNT_009_HELP=Displays the number of times the MLID retried a transmit operation because of a failure. CHECKSUM_ERROR_COUNT_009_NAME=Corrupt packets count CHECKSUM_ERROR_COUNT_009_HELP=Displays the number of times the MLID received a packet with corrupt data (for example, CRC errors). HARDWARE_RX_MISMATCH_COUNT_009_NAME=Length consistency check failures HARDWARE_RX_MISMATCH_COUNT_009_HELP=Displays the number of times the MLID received a packet that did not pass the length consistency checks. TOTAL_TX_OK_BYTE_COUNT_009_NAME=Number of bytes transmitted/sec TOTAL_TX_OK_BYTE_COUNT_009_HELP=Displays the number of bytes (including low-level headers) the MLID successfully transmitted onto the media/sec. TOTAL_RX_OK_BYTE_COUNT_009_NAME=Number of bytes received/sec TOTAL_RX_OK_BYTE_COUNT_009_HELP=Displays the number of bytes (including low-level headers) the MLID successfully received/sec. TOTAL_GROUP_ADDR_TX_COUNT_009_NAME=Transmitted packets with group destinations/sec TOTAL_GROUP_ADDR_TX_COUNT_009_HELP=Displays the number of packets the MLID transmitted with a group destination address/sec. TOTAL_GROUP_ADDR_RX_COUNT_009_NAME=Received packets with group destinations/sec TOTAL_GROUP_ADDR_RX_COUNT_009_HELP=Displays the number of packets the MLID received with a group destination address/sec. ADAPTER_RESET_COUNT_009_NAME=Number of adapter resets ADAPTER_RESET_COUNT_009_HELP=Displays the number of times the adapter was reset due to an internal failure of a call to the MLID's DriverReset function. ADAPTER_OPR_TIME_STAMP_009_NAME=Time since adapter last changed operational states ADAPTER_OPR_TIME_STAMP_009_HELP=Displays the time (platform dependent clock, such as number of ticks) since the adapter last changed operational state, for example, Loaded, DriverShutdown, or DriverReset, etc. Q_DEPTH_009_NAME=Queued ECB's Q_DEPTH_009_HELP=Displays the number of transmit ECB's that are queued for the adapter.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.