;*********************************************************************** ; ; OEMNSVCM.INF ; ; Novell IPX Compatibility Mode INF file. ; ;*********************************************************************** ; ; The following is the version info for Novell ; ;VeRsIoN=v4.81 Novell Client Install for Windows NT (980316) ;CoPyRiGhT=copyright 1992-2001, by Novell, INC. All rights reserved. [Identification] OptionType = NetService [Options] NWCMD [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" NwSubsInf = "NWSUBS.INF" SoftwareType = "driver" Exit_Code = 0 DriverToLoad = "" ; ; EventLog Message File ; NetEventDLL = "%SystemRoot%\System32\nls\"$(NLSDirName)"\nwevents.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ; ; Software ; ProductSoftwareName = "NWCMD" ProductSoftwareTitle = "Novell IPX Compatibility Mode" ProductSoftwareImagePath = "\SystemRoot\system32\drivers\nwcmd.sys" NetRuleSoftwareType = "NWCMDSys NWCMDDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """NWCMDSys"" yes no container" NetRuleSoftwareClass = {"NWCMDDriver basic"} NetRuleSoftwareBindable = {"NWCMDDriver NWCMDAdapter non exclusive 100"} ; ; NWCMDH ; ProductNWCMDHControl = service ProductNWCMDHHidden = 0 ProductNWCMDHInstrumentation = FALSE ProductNWCMDHName = "NWCMDH" ProductNWCMDHImagePath = "\SystemRoot\system32\drivers\nwcmd2.sys" ProductNWCMDHSvcType = "kernelautostart" ProductNWCMDHGroup = "" ProductNWCMDHDependList = {} ProductNWCMDHEventFile = "" ; ; Hardware ; ProductHardwareName = "NWCMD" ProductHardwareTitle = "Novell IPX Compatibility Adapter" NetRuleHardwareType = "NWCMD NWCMDAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"NWCMDAdapter basic"} ; ; Registry Key ; ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] ; ; Program Flow control variables ; from = "" to = "" ; ; Return Codes; Exit_Code is set to one of these ; ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" DriverPath = $(!STF_NTPATH)\drivers ; ; Product Info ; Manufacturer = "Novell" ProductMajorVersion = 4 ProductMinorVersion = 81 ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ;------------------------------------------------------------------------------ ; 1. Identify To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; Input: none ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette Description ;------------------------------------------------------------------------------ [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------------ ; 2. ReturnOptions To return the option list supported by this INF and ; the localized text list representing the options. ; Input: $($0): Lang. used (ENG | FRN | ....) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; $($R1): Option List ; $($R2): Option Text List ; ;------------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto returnoptions else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------------ ; 2. InstallOption This section is shelled to by main installation processing ; ; Function: To copy files representing Options ; To configure the installed option ; To update the Registry for the installed option ; ; Input: $($0): Lang. to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy ( YES | NO ) ; $($4): DoCopy ( YES | NO ) ; $($5): DoConfig ( YES | NO ) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; ;------------------------------------------------------------------------------ [InstallOption] ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) set !SrcDir = $($2) set !AddCopy = $($3) set !DoCopy = $($4) set !DoConfig = $($5) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto installoption else set Status = STATUS_NOLANGUAGE goto finish_InstallOption endif installoption = + Shell "" UnattendedInstallOption ; ; Get the data from the Unattended file. ; ifstr(i) $(!NWUnattendedFile) != "" ifstr(i) $(!NWUnattendedSection) != "" Shell $(!NWUnattendedFile) ReadDefaultData, "IPXCompatibilityModeParameters" ifstr(i) $($R0) != "STATUS_SUCCESSFUL" Debug-Output "Shell to read the NW Parameter values from an Unattend.txt file Failed." Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "Warning", $(UnattendFileReadFailed) ifstr(i) $($R1) == "CANCEL" set CommonStatus = STATUS_USERCANCEL goto end endif endif endif endif ifstr(i) $(!NWUnattendedFile) != "" ifstr(i) $(!NWWizard) != YES Debug-OutPut "OEMNSVCM.INF: !DoRemove = "$(!DoRemove) ifstr(i) $(!DoRemove) == YES set !NTN_InstallMode = deinstall else-Ifstr(i) $(!DoInstall) == NO Debug-OutPut "OEMNSVCM.INF: !DoInstall = "$(!DoInstall) set CommonStatus = STATUS_SUCCESSFUL goto end endif endif endif ; ; Call the CommonSection ; shell "" CommonSection $(Option) set Status = $($R0) ifstr(i) $($R1) != "" set DriverToLoad = { $($R1) } else set DriverToLoad = "" endif Return $(Status) $(DriverToLoad) [CommonSection] StartWait set Option = $($0) read-syms GeneralConstants ; ; Find what NLS directory is being used ; set NovellParameters = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Parameters" Debug-OutPut "NovellParameters is "$(NovellParameters) OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NLSDirName = *($(LanguageList), 4) else goto fatalregistry endif CloseRegKey $(KeyNovellParameters) else goto fatalregistry Endif ; ; Get NT version ; set CurrentVersion = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(CurrentVersion) $(MAXIMUM_ALLOWED) CurrentVersionKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(CurrentVersionKey) "CurrentVersion" VersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set VersionListData = *($(VersionList), 4) Split-string $(VersionListData) "." SplitVersionList Set NTMajorVersion = *($(SplitVersionList), 1) Set NTMinorVersion = *($(SplitVersionList), 3) Debug-OutPut "OEMNSVCM.INF: Windows NT current version is "$(VersionListData) Debug-OutPut "OEMNSVCM.INF: Windows NT Major version is "$(NTMajorVersion) Debug-OutPut "OEMNSVCM.INF: Windows NT Minor version is "$(NTMinorVersion) else Debug-Output "OEMNSVCM.INF: Error getting NT version" endif CloseRegKey $(CurrentVersionKey) else Debug-Output "OEMNSVCM.INF: Error opening "$(CurrentVersion) endif set-subst LF = "\n" read-syms FileConstants read-syms FileConstants$(!STF_LANGUAGE) read-syms InstallOption$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait set CurrentVersion = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(CurrentVersion) $(MAXIMUM_ALLOWED) CurrentVersionKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(CurrentVersionKey) "CurrentVersion" VersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set VersionListData = *($(VersionList), 4) Split-string $(VersionListData) "." SplitVersionList Set NTMajorVersion = *($(SplitVersionList), 1) Set NTMinorVersion = *($(SplitVersionList), 3) Debug-OutPut "Windows NT current version is "$(VersionListData) Debug-OutPut "Windows NT Major version is "$(NTMajorVersion) Debug-OutPut "Windows NT Minor version is "$(NTMinorVersion) else Debug-Output "OEMNSVCM.INF: Error getting NT version" endif CloseRegKey $(CurrentVersionKey) else Debug-Output "OEMNSVCM.INF: Error opening "$(CurrentVersion) endif Begin = + Set !G:DebugOutputControl = 0 Debug-Output "OEMNSVCM.INF: Begin Install Mode = "$(!NTN_InstallMode) Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = updateadapter else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "OEMNSVCM.INF: Can't configure the Novell CM software." Shell $(UtilityInf), RegistryErrorString, CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: ShellCode error: can't get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto Warning endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "OEMNSVCM.INF: Installing IPX Compatibility Mode adapter" ; ; Start the adapter install stuff ; ; ; Check whether NWIP is installed ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\NetWareIP" $(MAXIMUM_ALLOWED) KeyProduct ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set DeleteFlagVal = 0 GetRegValue $(KeyProduct) "DeleteFlag" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set DeleteFlagVal = *($(ValueData), 4) endif CloseRegKey $(KeyProduct) Ifint $(DeleteFlagVal) != 1 ; ; Cannot install NWCMD while NWIP is installed. ; Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(NWIPInstalledMessage) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set CommonStatus = STATUS_USERCANCEL goto end endif endif ; ; Is this an Advanced Server ; Debug-Output "OEMNSVCM.INF: Checking to see if advanced server" set AdvancedServer = "NO" Set TempKeyName = "SYSTEM\CurrentControlSet\Control\ProductOptions" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueName = "ProductType" GetRegValue $(TempKey) $(ValueName) ValueList Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set ValueListData = *($(ValueList), 4) set AdvancedServer = "YES" ifstr(i) $(ValueListData) == "WinNT" set AdvancedServer = "NO" Debug-Output "OEMNSVCM.INF: AdvancedServer is "$(AdvancedServer) endif else Debug-Output "OEMNSVCM.INF: Failed to get ProductType" endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Failed to open ProductOptions key" endif set RasProtocolsKeyName = $(!NTN_SoftwareBase)"\Microsoft\RAS\PROTOCOLS" OpenRegKey $(!REG_H_LOCAL) "" $(RasProtocolsKeyName) $(MAXIMUM_ALLOWED) KeyRasProtocols ifstr $(KeyRasProtocols) != "" GetRegValue $(KeyRasProtocols) "fIpxSelected" IpxSelectedValue ifint $(RegLastError) == 0 set IpxSelectedVal = *($(IpxSelectedValue), 4) Debug-Output "OEMNSVCM.INF: IpxSelectedVal is "$(IpxSelectedVal) ifint $(IpxSelectedVal) == 1 ; ; RAS and NWCMD are not compatible. ; CloseRegKey $(KeyRasProtocols) Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(IPOnlyMessageText) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set CommonStatus = STATUS_USERCANCEL goto end Endif Endif GetRegValue $(KeyRasProtocols) "fIpxAllowed" IpxAllowedValue ifint $(RegLastError) == 0 set IpxAllowedVal = *($(IpxAllowedValue), 4) ifint $(IpxAllowedVal) == 1 ; ; RAS and NWCMD are not compatible. ; CloseRegKey $(KeyRasProtocols) Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(IPOnlyMessageText) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set CommonStatus = STATUS_USERCANCEL goto end Endif Endif CloseRegKey $(KeyRasProtocols) Endif Shell "" Install-NWLINK ; ; Add the software component ; ifint $(NTMajorVersion) == "4" set GroupToJoin = "NDIS" else set GroupToJoin = "" endif Debug-Output "OEMNSVCM.INF: AddSoftwareComponent" Shell $(UtilityInf), AddSoftwareComponent + $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), + $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), + "kernelautostart", + $(GroupToJoin), + "", + "", + $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNSVCM.INF: AddSoftwareComponent Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {Hidden,$(NoTitle),$(!REG_VT_DWORD),1},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {Review,$(NoTitle),$(!REG_VT_DWORD),1},+ {PathName,$(NoTitle),$(!REG_VT_SZ),$(!STF_CWDDIR)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNSVCM.INF: AddValueList Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)} } Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNSVCM.INF: AddValueList Registry error "$(RegistryErrorIndex) goto fatalregistry endif Debug-Output "OEMNSVCM.INF: install service: NWCMDH." Shell $(UtilityInf), CreateService, + $(ProductNWCMDHName), + $(ProductNWCMDHDisplayName), + $(ProductNWCMDHImagePath), + $(ProductNWCMDHSvcType), + $(ProductNWCMDHGroup), + $(ProductNWCMDHDependList), "", + $(ProductNWCMDHEventFile), + $(ProductNWCMDHTypeSupported), + $(ProductNWCMDHEventLogLocation), 1 Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: ShellCode error installing NWCMDH." goto ShellCodeError Endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) Debug-Output "OEMNSVCM.INF: Registry error installing NWCMDH." goto fatalregistry Endif Set SvcSvcKey = $($R1) Set SvcParamKey = $($R2) Set SvcLinkKey = $($R3) CloseRegKey $(SvcSvcKey) CloseRegKey $(SvcParamKey) CloseRegKey $(SvcLinkKey) ; ; Add the hardware component at board two or later ; ; ; If on NT 4.00 machine and not an advanced server, add the board five times ; Otherwise, add it once ; set Count = 0 set endCount = 1 ifint $(NTMajorVersion) == "4" ifstr(i) $(AdvancedServer) != "YES" set endCount = 15 endif endif StartHardwareInstallation = + ifint $(Count) < $(endCount) ifint $(Count) > 0 set HideIt = 1 else set HideIt = 0 endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName),"","","2" ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddHardwareComponent Shell error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNSVCM.INF: AddHardwareComponent Registry error "$(RegistryErrorIndex) CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Hidden,$(NoTitle),$(!REG_VT_DWORD),$(HideIt)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNSVCM.INF: AddValueList Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) set-add Count = $(Count), 1 goto StartHardwareInstallation endif Ifstr(i) $(CalledFromUpdate) == "YES" goto ReturnToUpdate endif ; ; By default depend on TCPIP ; set DependOnList = {"Tcpip"} set TempKeyName = $(!NTN_ServiceBase)"\NWCMD\Linkage" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"OtherDependencies", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DependOnList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't set Compatibility Mode linkage key" goto fatalregistry endif FlushRegKey $(TempKey) CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Can't open Compatibility Mode linkage key" goto fatalregistry endif ; ; Add NwlnkIpx binding for Compatibility Mode Driver. ; Remove binding for ndisDriver ; Shell "" Install-Bindings ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: Install-Bindings ShellCode error "$($ShellCode) goto ShellCodeError else Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM.INF: Install-Bindings returned error" goto fatalregistry endif endif ; ; Install various registry parameters ; Debug-Output "OEMNSVCM.INF: Install-Parameters" Install Install-Parameters ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError else-ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM: User Canceled due to a error processing the Unattended Variables." set CommonStatus = STATUS_USERCANCEL goto setfailed endif goto end configureadapter = + Debug-Output "OEMNSVCM.INF: Configuring Compatibility Mode adapter" StartWait LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\nwsetup.dll" NwLibHandle SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nt4setup.hlp" $(!MinimumID) $(!MaximumID) ifint $(NTMajorVersion) < "4" SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nt3setup.hlp" $(!MinimumID) $(!MaximumID) endif set HelpContext = $(IDH_NETWAREWRKSTATIONPARMS) LibraryProcedure LibResult $(NwLibHandle) NWConfigure $(Option) Debug-Output "OEMNSVCM.INF: dialog returned "$(LibResult) ifstr(i) $(LibResult) != "CONTINUE" set CommonStatus = STATUS_USERCANCEL endif FreeLibrary $(NwLibHandle) ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables goto end bindadapter =+ Debug-Output "OEMNSVCM.INF: Binding Compatibility Mode adapter" ; ; First make sure tcpip was not removed out from under us. ; If it was, pop message warning user. ; set NoTCPIP = 0 set TempKeyName = $(!NTN_ServiceBase)"\tcpip" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(TempKey) "DeleteFlag" ValueData ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NoTCPIP = 1 endif else set NoTCPIP = 1 Debug-Output "OEMNSVCM.INF: Failed to open key "$(TempKeyName) endif ifint $(NoTCPIP) == 1 ; ; Pop up message warning user that TCPIP is not installed and ; that Compatibility Mode will not function correctly. ; set DlgType = "MessageBox" set STF_MB_TITLE = $(ErrorMessageTitle) set STF_MB_TEXT = $(NoTcpipMessageText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "NoTcpipError" endif ; ; By default depend on TCPIP ; set DependOnList = {"Tcpip"} set TempKeyName = $(!NTN_ServiceBase)"\NWCMD" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"DependOnService", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DependOnList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't set Compatibility Mode linkage key" goto fatalregistry endif FlushRegKey $(TempKey) CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Can't open Compatibility Mode linkage key" goto fatalregistry endif set TempKeyName = $(!NTN_ServiceBase)"\NWCMD\Linkage" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"OtherDependencies", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DependOnList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't set Compatibility Mode linkage key" goto fatalregistry endif FlushRegKey $(TempKey) CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Can't open Compatibility Mode linkage key" goto fatalregistry endif ; ; Check to see if Microsoft Client is installed. If so, remove its bindings to NWLink. ; Debug-Output "OEMNSVCM.INF: Check to see if Microsoft Client (Workstation) is installed" OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\LanmanWorkstation\Linkage" $(MAXIMUM_ALLOWED) KeyLanman Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\LanmanWorkstation\Linkage\Disabled" $(MAXIMUM_ALLOWED) KeyLanmanDisabled GetRegValue $(KeyLanman) "Bind" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList1 = {} Set DisabledList = {} Set FindValue = "\Device\NwlnkIpx" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList1 = >($(NewList1), $($)) Debug-Output "OEMNSVCM.INF: Bind (WS): NewList1 set" else Debug-Output "OEMNSVCM.INF: Bind (WS): Setting DisabledList to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Bind (WS): NewList1 is "$(NewList1) Ifstr(i) $(NewList1) != {} Set ValueList = $(NewList1) Endif Set NewList2 = {} Set FindValue = "\Device\NwlnkNb" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList2 = >($(NewList2), $($)) Debug-Output "OEMNSVCM.INF: Bind (WS): NewList2 set" else Set DisabledList = >($(DisabledList), $($)) Debug-Output "OEMNSVCM.INF: Bind (WS): Setting DisabledList to "$($) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Bind (WS): NewList2 is "$(NewList2) Ifstr(i) $(NewList2) != {} Debug-Output "OEMNSVCM.INF: Bind (WS): Setting Reg value to Newlist2: "$(NewList2) SetRegValue $(KeyLanman) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList2)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Bind value for LanmanWS" Endif else-Ifstr(i) $(NewList1) != {} Debug-Output "OEMNSVCM.INF: Bind (WS): Setting Reg value to Newlist1: "$(NewList1) SetRegValue $(KeyLanman) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList1)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Bind value for LanmanWS" Endif Endif Debug-Output "OEMNSVCM.INF: DisabledList (Bind) equals: "$(DisabledList) Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif GetRegValue $(KeyLanman) "Export" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList1 = {} Set DisabledList = {} Set FindValue = "\Device\LanmanWorkstation\NwlnkIpx" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Debug-Output "OEMNSVCM.INF: Export (WS): NewList1 set" Set NewList1 = >($(NewList1), $($)) else Debug-Output "OEMNSVCM.INF: Export (WS): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Export (WS): NewList1 is "$(NewList1) Ifstr(i) $(NewList1) != {} Set ValueList = $(NewList1) Endif Set NewList2 = {} Set FindValue = "\Device\LanmanWorkstation\NwlnkNb" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Debug-Output "OEMNSVCM.INF: Export (WS): NewList2 set" Set NewList2 = >($(NewList2), $($)) else Debug-Output "OEMNSVCM.INF: Export (WS): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Export (WS): NewList2 is "$(NewList2) Ifstr(i) $(NewList2) != {} SetRegValue $(KeyLanman) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList2)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Export value for LanmanWS" Endif else-Ifstr(i) $(NewList1) != {} SetRegValue $(KeyLanman) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList1)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Export value for LanmanWS" Endif Endif Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif GetRegValue $(KeyLanman) "Route" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList = {} Set DisabledList = {} Set FindValue = """NwlnkNb"" ""NwlnkIpx""" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList = >($(NewList), $($)) Debug-Output "OEMNSVCM.INF: Route (WS): NewList set" else Debug-Output "OEMNSVCM.INF: Route (WS): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Debug-Output "OEMNSVCM.INF: Route (WS): NewList is "$(NewList) SetRegValue $(KeyLanman) {"Route", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Route value for LanmanWS" Endif Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Route", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif Endif CloseRegKey $(KeyLanman) CloseRegKey $(KeyLanmanDisabled) Endif Debug-Output "OEMNSVCM.INF: Check to see if Microsoft Client (Server) is installed" OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\LanmanServer\Linkage" $(MAXIMUM_ALLOWED) KeyLanman Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\LanmanServer\Linkage\Disabled" $(MAXIMUM_ALLOWED) KeyLanmanDisabled GetRegValue $(KeyLanman) "Bind" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList1 = {} Set DisabledList = {} Set FindValue = "\Device\NwlnkIpx" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Debug-Output "OEMNSVCM.INF: Bind (SV): NewList1 set" Set NewList1 = >($(NewList1), $($)) else Debug-Output "OEMNSVCM.INF: Bind (SV): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Bind (SV): NewList1 is "$(NewList1) Ifstr(i) $(NewList1) != {} Set ValueList = $(NewList1) Endif Set NewList2 = {} Set FindValue = "\Device\NwlnkNb" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Debug-Output "OEMNSVCM.INF: Bind (SV): NewList2 set" Set NewList2 = >($(NewList2), $($)) else Debug-Output "OEMNSVCM.INF: Bind (SV): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Bind (SV): NewList2 is "$(NewList2) Ifstr(i) $(NewList2) != {} SetRegValue $(KeyLanman) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList2)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Bind value for LanmanSV" Endif else-Ifstr(i) $(NewList1) != {} SetRegValue $(KeyLanman) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList1)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Bind value for LanmanSV" Endif Endif Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif GetRegValue $(KeyLanman) "Export" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList1 = {} Set DisabledList = {} Set FindValue = "\Device\LanmanServer\NwlnkIpx" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList1 = >($(NewList1), $($)) Debug-Output "OEMNSVCM.INF: Export (SV): NewList1 set" else Set DisabledList = >($(DisabledList), $($)) Debug-Output "OEMNSVCM.INF: Export (SV): Setting Disabled to "$($) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Export (SV): NewList1 is "$(NewList1) Ifstr(i) $(NewList1) != {} Set ValueList = $(NewList1) Endif Set NewList2 = {} Set FindValue = "\Device\LanmanServer\NwlnkNb" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList2 = >($(NewList2), $($)) Debug-Output "OEMNSVCM.INF: Export (SV): NewList2 set" else Debug-Output "OEMNSVCM.INF: Export (SV): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Endif Debug-Output "OEMNSVCM.INF: Export (SV): NewList2 is "$(NewList2) Ifstr(i) $(NewList2) != {} SetRegValue $(KeyLanman) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList2)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Export value for LanmanSV" Endif else-Ifstr(i) $(NewList1) != {} SetRegValue $(KeyLanman) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList1)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Export value for LanmanSV" Endif Endif Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif GetRegValue $(KeyLanman) "Route" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList = {} Set DisabledList = {} Set FindValue = """NwlnkNb"" ""NwlnkIpx""" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList = >($(NewList), $($)) Debug-Output "OEMNSVCM.INF: Route (SV): NewList set" else Debug-Output "OEMNSVCM.INF: Route (SV): Setting Disabled to "$($) Set DisabledList = >($(DisabledList), $($)) Endif EndForListDo Debug-Output "OEMNSVCM.INF: Route (SV): NewList is "$(NewList) SetRegValue $(KeyLanman) {"Route", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Route value for LanmanSV" Endif Ifstr(i) $(DisabledList) != {} SetRegValue $(KeyLanmanDisabled) {"Route", $(NoTitle), $(!REG_VT_MULTI_SZ), $(DisabledList)} Endif Endif Endif CloseRegKey $(KeyLanman) CloseRegKey $(KeyLanmanDisabled) Endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Microsoft\NwlnkIpx\CurrentVersion\NetRules" $(MAXIMUM_ALLOWED) KeyNwlnkIpx Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(KeyNwlnkIpx) "Bindable" ValueData Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ValueList = *($(ValueData), 4) Set NewList = {} Set FindValue = "lanmanServer ipxTransport non non 100" Ifcontains(i) $(FindValue) in $(ValueList) ForListDo $(ValueList) Ifstr(i) $($) != $(FindValue) Set NewList = >($(NewList), $($)) Endif EndForListDo SetRegValue $(KeyNwlnkIpx) {"Bindable", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Bindable value for NwlnkIpx" Endif Endif Endif CloseRegKey $(KeyNwlnkIpx) Endif goto end removeadapter = + Debug-Output "OEMNSVCM.INF: Removing Compatibility Mode adapter" ; ; Remove adapter ; ; ; Find the Compatibility Mode adapters ; Shell $(NwSubsInf) GetTotalAdapterList Set OdiProductNameList = $($R0) Set OdiTitleList = $($R1) Set OdiCardList = $($R2) Set NumberOdiAdapters = $($R3) Set NdisProductNameList = $($R4) Set NdisTitleList = $($R5) Set NdisCardList = $($R6) Set NumberNdisAdapters = $($R7) Set ODINSUPCardNumber = $($R8) Set NWCMDCardNumList = $($R11) Set NumberNWCMDAdapters = $($R12) Debug-Output "OEMNSVCM.INF: NWCMDCardNumList is "$(NWCMDCardNumList) ForListDo $(NWCMDCardNumList) set !NTN_RegBase = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($) Debug-Output "OEMNSVCM.INF: !NTN_RegBase is "$(!NTN_RegBase) Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "OEMNSVCM.INF: RemoveSoftwareComponent" Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Debug-Output "OEMNSVCM.INF: RemoveHardwareComponent" Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: RemoveHardwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif EndForListDo Debug-Output "OEMNSVCM.INF: remove service: NWCMDH." Shell $(UtilityInf), RemoveService, $(ProductNWCMDHName), NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: ShellCode error removing NWCMDH." goto ShellCodeError Endif ; ; Remove NwlnkIpx binding to NWCMDDriver. ; Add back binding to ndisDriver ; Shell "" Remove-Bindings ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: Remove-Bindings ShellCode error "$($ShellCode) goto ShellCodeError else Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM.INF: Remove-Bindings returned error" goto fatalregistry endif endif ; ; Remove the class factory GUID ; Set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\CLSID" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) DeleteRegTree $(TempKey) "{9A19E5B5-3B30-11d1-84D3-00A0C9249033}" ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Failed to delete NWCMD CLSID registry key" endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Failed to open CLSID key to delete NWCMD" endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards" $(MAXIMUM_ALLOWED) KeyNetcards Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) EnumRegKey $(KeyNetcards) NetcardsList ForListDo $(NetcardsList) set KeyName = *($($),1) OpenRegKey $(KeyNetcards) "" $(KeyName) $(MAXIMUM_ALLOWED) Card Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(Card), "ServiceName" ServiceNameInfo Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set CardServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(MAXIMUM_ALLOWED) ServiceKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) DeleteRegTree $(ServiceKey) $(CardServiceName)"\Parameters\Nwcmd" CloseRegKey $(ServiceKey) endif endif CloseRegKey $(Card) else Debug-Output "OEMNSVIP.INF: Error opening Netcard: "$(KeyName) endif EndForListDo CloseRegKey $(KeyNetcards) Endif goto end updateadapter = + Debug-Output "OEMNSVCM.INF: Updating Compatibility Mode adapter" set TempKeyName = $(!NTN_ServiceBase)"\NWCMDH" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: install service: NWCMDH." Shell $(UtilityInf), CreateService, + $(ProductNWCMDHName), + $(ProductNWCMDHDisplayName), + $(ProductNWCMDHImagePath), + $(ProductNWCMDHSvcType), + $(ProductNWCMDHGroup), + $(ProductNWCMDHDependList), "", + $(ProductNWCMDHEventFile), + $(ProductNWCMDHTypeSupported), + $(ProductNWCMDHEventLogLocation), 1 Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: ShellCode error installing NWCMDH." goto ShellCodeError Endif Set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) Debug-Output "OEMNSVCM.INF: Registry error installing NWCMDH." goto fatalregistry Endif Set SvcSvcKey = $($R1) Set SvcParamKey = $($R2) Set SvcLinkKey = $($R3) CloseRegKey $(SvcSvcKey) CloseRegKey $(SvcParamKey) CloseRegKey $(SvcLinkKey) else CloseRegKey $(TempKey) endif ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError else-ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM: User Canceled due to a error processing the Unattended Variables." set CommonStatus = STATUS_USERCANCEL goto setfailed endif goto end ; ; this is the old update code ; Shell "" Install-NWLINK ; ; Remove the old NWCMD way of preventing NwlnkIpx from binding ; to anything but NWCMD. Go straight to the disabled key and ; remove the stuff that the old NWCMD install put there. ; Shell "" Remove-Oldstyle-Bindings ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: Remove-Oldstyle-Bindings ShellCode error "$($ShellCode) goto ShellCodeError else Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM.INF: Remove-Oldstyle-Bindings returned error" goto fatalregistry endif endif ; ; Install the new bindings method by changing one of NwlnkIpx's bindable ; rules so that NwlnkIpx will only bind to NWCMD ; Shell "" Install-Bindings ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: Install-Bindings ShellCode error "$($ShellCode) goto ShellCodeError else Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM.INF: Install-Bindings returned error" goto fatalregistry endif endif ; ; Hide the software driver for Novell Compatibility Mode ; Set TempKeyName = $(!NTN_SoftwareBase)"\Novell\NWCMD\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Hiding the Compatibility Mode software driver" SetRegValue $(TempKey) {"Hidden", $(NoTitle), $(!REG_VT_DWORD), 1} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Cant update Winsock Transports value" Endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Failed to update the Hidden value for "$(TempKeyName) endif ; ; Get a count of NWCMD adapters. Add up to 5 adapters for NT 4.00 ; Shell $(NwSubsInf) GetTotalAdapterList Set OdiProductNameList = $($R0) Set OdiTitleList = $($R1) Set OdiCardList = $($R2) Set NumberOdiAdapters = $($R3) Set NdisProductNameList = $($R4) Set NdisTitleList = $($R5) Set NdisCardList = $($R6) Set NumberNdisAdapters = $($R7) Set ODINSUPCardNumber = $($R8) Set NWCMDCardNumList = $($R9) Set NumberNWCMDAdapters = $($R10) ifint $(NTMajorVersion) == "4" set Count = $(NumberNWCMDAdapters) set endCount = 15 else set Count = 1 set endCount = 1 endif set CalledFromUpdate = "YES" goto StartHardwareInstallation ReturnToUpdate = + ; ; Install various registry parameters ; Debug-Output "OEMNSVCM.INF: Install-Parameters" Install Install-Parameters ; ; Write out the unattended variables to registry ; shell "" Write-Unattended-Variables ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError else-ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNSVCM: User Canceled due to a error processing the Unattended Variables." set CommonStatus = STATUS_USERCANCEL goto setfailed endif goto end abandon = + Debug-Output "OEMNSVCM.INF: abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: RemoveHardwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNSVCM.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatal = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) $(DriverToLoad) [Install-Option] set STF_VITAL = "" ifstr(i) $(!AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-EXE $(!STF_SRCDIR)redir $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(!DoCopy) == "YES" CopyFilesInCopyList endif ifstr(i) $(!DoConfig) == "YES" endif Exit [Install-Update] Debug-Output "OEMNSVCM.INF: Install-Update" set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-EXE $(!STF_SRCDIR)redir $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH) CopyFilesInCopyList exit ;************************************************************************* ; ; SECTION: Install-Bindings ; ; PURPOSE: Called at install time and update time to install the ; NwlnkIpx bindings. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;************************************************************************* [Install-Bindings] StartWait Read-syms GeneralConstants Set status = STATUS_SUCCESSFUL ; ; Open NwlnkIpx keys ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Microsoft\NwlnkIpx\CurrentVersion\NetRules" $(MAXIMUM_ALLOWED) RulesKey Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't open NwlnkIpx NetRules key" set status = STATUS_FAILED Goto IB_Return Endif ; ; Set up bindings for NwlnkIpx ; Set ValueName = "Bindable" GetRegValue $(RulesKey) $(ValueName) ValueList Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CloseRegKey $(RulesKey) Debug-Output "OEMNSVCM.INF: Can't get bindable value for NwlnkIpx" set status = STATUS_FAILED Goto IB_Return endif Set OldList = *($(ValueList), 4) Set NewList = {} Debug-Output "OEMNSVCM.INF: OldList for NwlnkIpx bind is "$(OldList) ForListDo $(OldList) Set Item = $($) Ifstr(i) $(Item) != "ipxTransport ndisDriver non non 100" Set NewList = >($(NewList), $(Item)) else Set NewList = >($(NewList), "ipxTransport NWCMDDriver non non 100") endif EndForListDo Debug-Output "OEMNSVCM.INF: NewList for NwlnkIpx bind is "$(NewList) SetRegValue $(RulesKey) {$(ValueName), $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Ouput "OEMNSVCM.INF: Can't update Bindable value for NwlnkIpx" set status = STATUS_FAILED goto IB_Return Endif ; ; Close keys ; CloseRegKey $(RulesKey) IB_Return = + Return $(status) ;************************************************************************* ; ; SECTION: Remove-Bindings ; ; PURPOSE: Called at remove time to remove the NwlnkIpx bindings. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;************************************************************************* [Remove-bindings] StartWait Read-syms GeneralConstants Set status = STATUS_SUCCESSFUL ; ; Open NwlnkIpx keys ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Microsoft\NwlnkIpx\CurrentVersion\NetRules" $(MAXIMUM_ALLOWED) RulesKey Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't open NwlnkIpx NetRules key" set status = STATUS_FAILED Goto RB_Return Endif ; ; Restore bindings for NwlnkIpx ; Set ValueName = "Bindable" GetRegValue $(RulesKey) $(ValueName) ValueList Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CloseRegKey $(RulesKey) Debug-Output "OEMNSVCM.INF: Can't get bindable value for NwlnkIpx" set status = STATUS_FAILED Goto RB_Return endif Set OldList = *($(ValueList), 4) Set NewList = {} Debug-Output "OEMNSVCM.INF: OldList for NwlnkIpx bind is "$(OldList) ForListDo $(OldList) Set Item = $($) Ifstr(i) $(Item) != "ipxTransport NWCMDDriver non non 100" Set NewList = >($(NewList), $(Item)) else Set NewList = >($(NewList), "ipxTransport ndisDriver non non 100") endif EndForListDo Debug-Output "OEMNSVCM.INF: NewList for NwlnkIpx bind is "$(NewList) SetRegValue $(RulesKey) {$(ValueName), $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Ouput "OEMNSVCM.INF: Can't update Bindable value for NwlnkIpx" set status = STATUS_FAILED goto RB_Return Endif ; ; Close keys ; CloseRegKey $(RulesKey) RB_Return = + Return $(status) [Remove-Oldstyle-bindings] StartWait Read-syms GeneralConstants Set Status = STATUS_SUCCESSFUL ; ; Open NwlnkIpx key and remove disabled bindings ; set TempKeyName = $(!NTN_ServiceBase)"\NwlnkIpx\Linkage\Disabled" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) DisabledKey Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(DisabledKey) {"Bind", $(NoTitle), $(!REG_VT_MULTI_SZ), {}} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't update bind value for NwlnkIpx Disabled key" CloseRegKey $(DisabledKey) set Status = STATUS_FAILED Goto ROB_Return endif SetRegValue $(DisabledKey) {"Export", $(NoTitle), $(!REG_VT_MULTI_SZ), {}} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't update export value for NwlnkIpx Disabled key" CloseRegKey $(DisabledKey) set Status = STATUS_FAILED Goto ROB_Return endif SetRegValue $(DisabledKey) {"Route", $(NoTitle), $(!REG_VT_MULTI_SZ), {}} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't update route value for NwlnkIpx Disabled key" CloseRegKey $(DisabledKey) set Status = STATUS_FAILED Goto ROB_Return endif CloseRegKey $(DisabledKey) else Debug-Output "OEMNSVCM.INF: Can't open NwlnkIpx Disabled key" set Status = STATUS_FAILED Goto ROB_Return endif ; ; Open NWCMD keys to remove one of the bindable rules that was set ; by previous installs of NWCMD. The bindable rule was set under ; NWCMD and now I want it to replace a rule under NwlnkIpx ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\Novell\NWCMD\CurrentVersion\NetRules" $(MAXIMUM_ALLOWED) RulesKey Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Can't open Compatibility Mode NetRules key" set status = STATUS_FAILED Goto ROB_Return Endif ; ; Set up bindings for Compatibility Mode ; Set ValueName = "Bindable" GetRegValue $(RulesKey) $(ValueName) ValueList Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CloseRegKey $(RulesKey) Debug-Output "OEMNSVCM.INF: Can't get bindable value for Compatibility Mode" set status = STATUS_FAILED Goto ROB_Return endif Set OldList = *($(ValueList), 4) Set NewList = {} Debug-Output "OEMNSVCM.INF: OldList for Compatibility Mode bind is "$(OldList) ForListDo $(OldList) Set Item = $($) Ifstr(i) $(Item) != "ipxTransport NWCMDDriver non non 100" Set NewList = >($(NewList), $(Item)) endif EndForListDo Debug-Output "OEMNSVCM.INF: NewList for Compatibility Mode bind is "$(NewList) SetRegValue $(RulesKey) {$(ValueName), $(NoTitle), $(!REG_VT_MULTI_SZ), $(NewList)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Ouput "OEMNSVCM.INF: Can't update Bindable value for Compatibility Mode" set status = STATUS_FAILED goto ROB_Return Endif ; ; Close keys ; CloseRegKey $(RulesKey) ROB_Return = + Return $(Status) ;************************************************************************* ; ; SECTION: Install-NWLINK ; ; PURPOSE: Called at install time and update time to install the ; NWLINKIPX compatible transport. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;************************************************************************* [Install-NWLINK] read-syms GeneralConstants read-syms FileConstants read-syms InstallOption$(!STF_LANGUAGE) ; ; Assume all is well until we find out otherwise ; set CommonStatus = STATUS_SUCCESSFUL OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\NwLnkIpx" $(MAXIMUM_ALLOWED) KeyNWLINK ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNPRNW.INF: Installing NWLINK" Set OldInstallMode = $(!NTN_InstallMode) Set !NTN_InstallMode = install Set OldSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE) set !STF_SRCDIR_OVERRIDE = "" Shell "oemnxpip.inf" InstallOption $(!STF_LANGUAGE) "NWLNKIPX" "" YES YES YES Set !STF_SRCDIR_OVERRIDE = $(OldSTF_SRCDIR_OVERRIDE) Set !NTN_InstallMode = $(OldInstallMode) ifint $($ShellCode) != $(!SHELL_CODE_OK) set CommonStatus = STATUS_FAILED goto terminate Endif set CommonStatus = $($R0) Ifstr(i) $(CommonStatus) != STATUS_SUCCESSFUL Debug-Output "OEMNPRNW.INF: Install of NWLINK returned "$(CommonStatus) goto terminate Endif Else CloseRegKey $(KeyNWLINK) Endif terminate = + Return $(CommonStatus) ;************************************************************************* ; ; SECTION: Install-Parameters ; ; PURPOSE: Called at install or update to add ; various parameters to the registry ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;************************************************************************* [Install-Parameters] ; ; Add the class factory GUID ; set SoftwareNovell = $(!NTN_SoftwareBase)"\"$(Manufacturer) OpenRegKey $(!REG_H_LOCAL) "" $(SoftwareNovell) $(MAXIMUM_ALLOWED) KeySoftwareNovell ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error opening "$(SoftwareNovell) Else set NovellCLSID = "CLSID" OpenRegKey $(KeySoftwareNovell) "" $(NovellCLSID) $(MAXIMUM_ALLOWED) KeyNovellCLSID ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeySoftwareNovell) {$(NovellCLSID), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNovellCLSID ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error creating Software\Novell\CLSID" Endif Endif Endif Ifstr(i) $(KeyNovellCLSID) != "" CreateRegKey $(KeyNovellCLSID) {"{9A19E5B5-3B30-11d1-84D3-00A0C9249033}", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNewCLSID ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyNewCLSID) {"",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)} CreateRegKey $(KeyNewCLSID) {"LocalServer32", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNewSubCLSID ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyNewSubCLSID) {"",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)} Endif Endif CloseRegKey $(KeyNovellCLSID) Endif Ifstr(i) $(KeySoftwareNovell) != "" CloseRegKey $(KeySoftwareNovell) Endif set SoftwareNovell = $(!NTN_SoftwareBase)"\"$(Manufacturer) OpenRegKey $(!REG_H_LOCAL) "" $(SoftwareNovell) $(MAXIMUM_ALLOWED) KeySoftwareNovell ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error opening "$(SoftwareNovell) Else set NovellNWCMD = "NWCMD" OpenRegKey $(KeySoftwareNovell) "" $(NovellNWCMD) $(MAXIMUM_ALLOWED) KeyNovellNWCMD ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error opening "$(NovellNWCMD) CreateRegKey $(KeySoftwareNovell) {$(NovellNWCMD), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNovellNWCMD ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error creating Software\Novell\NWCMD" Endif Else Debug-Output "OEMNSVCM.INF: OPENED "$(NovellNWCMD) Endif Endif Ifstr(i) $(KeyNovellNWCMD) != "" CreateRegKey $(KeyNovellNWCMD) {"Address Resolution", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyAddrRes ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyAddrRes) {"Configured", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyAddrResConfig ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyAddrResConfig) {"11",$(NoTitle),$(!REG_VT_SZ),"{AD518629-02B4-11d1-8FF9-00A0C925D248}"} SetRegValue $(KeyAddrResConfig) {"12",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F70-2087-11d1-9004-00A0C925D248}"} Else Debug-Output "OEMNSVCM.INF: FAILED TO CREATE Configured") Endif Else Debug-Output "OEMNSVCM.INF: FAILED TO CREATE ADDR-RES" Endif Endif Ifstr(i) $(KeySoftwareNovell) != "" CloseRegKey $(KeySoftwareNovell) Endif Ifstr(i) $(KeyNovellNWCMD) != "" CloseRegKey $(KeyNovellNWCMD) Endif Ifstr(i) $(KeyAddrRes) != "" CloseRegKey $(KeyAddrRes) Endif Ifstr(i) $(KeyAddrResConfig) != "" CloseRegKey $(KeyAddrResConfig) Endif ; ; HKEY_LOCAL_MACHINE\Software\Novell\NWCMD\CurrentVersion ; set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\NWCMD\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; ; Set internal versions ; set HaveInternalVersion = YES ifint $(!MajorInternalVersion) == 0 ifint $(!MinorInternalVersion) == 0 set HaveInternalVersion = NO endif endif ifstr(i) $(HaveInternalVersion) == NO DeleteRegValue $(TempKey) "MajorInternalVersion" DeleteRegValue $(TempKey) "MinorInternalVersion" else SetRegValue $(TempKey) {"MajorInternalVersion", $(NoTitle), $(!REG_VT_DWORD), $(!MajorInternalVersion)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Unable to update MajorInternalVersion value in "$(TempKeyName) endif SetRegValue $(TempKey) {"MinorInternalVersion", $(NoTitle), $(!REG_VT_DWORD), $(!MinorInternalVersion)} Ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Unable to update MinorInternalVersion value in "$(TempKeyName) endif endif CloseRegKey $(TempKey) endif ifstr(i) $(!NWWizard) != YES set ProtocolsListData = "" set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Parameters" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(TempKey) {"Protocols", $(NoTitle), $(!REG_VT_SZ), "IP"} SetRegValue $(TempKey) {"Remove IPX", $(NoTitle), $(!REG_VT_DWORD), 0} CloseRegKey $(TempKey) endif set DO_TCPIP = YES set DO_NWLINK = YES set InstallCompatMode = YES ; ; HKEY_LOCAL_MACHINE\Software\Novell\NetWareWorkstation\Policies\Network ; set SoftwareNovell = $(!NTN_SoftwareBase)"\"$(Manufacturer) OpenRegKey $(!REG_H_LOCAL) "" $(SoftwareNovell) $(MAXIMUM_ALLOWED) KeySoftwareNovell ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error opening "$(SoftwareNovell) Else set SoftwareNovellNW = "NetWareWorkstation" OpenRegKey $(KeySoftwareNovell) "" $(SoftwareNovellNW) $(MAXIMUM_ALLOWED) KeySoftwareNovellNW ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error opening "$(SoftwareNovellNW) Else set NovellNWPolicies = "Policies" OpenRegKey $(KeySoftwareNovellNW) "" $(NovellNWPolicies) $(MAXIMUM_ALLOWED) KeyNovellNWPolicies ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeySoftwareNovellNW) {$(NovellNWPolicies), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNovellNWPolicies ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error creating Software\Novell\NetWareWorkstation\Policies" Endif Endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NetworkPolicies = "Network" OpenRegKey $(KeyNovellNWPolicies) "" $(NetworkPolicies) $(MAXIMUM_ALLOWED) KeyNetworkPolicies ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNovellNWPolicies) {$(NetworkPolicies), $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNetworkPolicies ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Error creating Software\Novell\NetWareWorkstation\Policies\Network" Endif Endif Endif Endif Endif Ifstr(i) $(KeyNetworkPolicies) != "" ifstr(i) $(DO_TCPIP) == "YES" GetRegValue $(KeyNetworkPolicies) "Preferred" PreferredList ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) SetRegValue $(KeyNetworkPolicies) {"Preferred",$(NoTitle),$(!REG_VT_DWORD),"2"} endif Endif OpenRegKey $(KeyNetworkPolicies) "" "Available" $(MAXIMUM_ALLOWED) KeyAvailable ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNetworkPolicies) {"Available", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyAvailable endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyAvailable) {"2",$(NoTitle),$(!REG_VT_SZ),"IP"} SetRegValue $(KeyAvailable) {"6",$(NoTitle),$(!REG_VT_SZ),"IPX"} CloseRegKey $(KeyAvailable) Endif OpenRegKey $(KeyNetworkPolicies) "" "Configured" $(MAXIMUM_ALLOWED) KeyConfigured ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNetworkPolicies) {"Configured", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyConfigured endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Configured DO_TCPIP = "$(DO_TCPIP) ifstr(i) $(DO_TCPIP) == "YES" SetRegValue $(KeyConfigured) {"2",$(NoTitle),$(!REG_VT_SZ),"IP"} else DeleteRegValue $(KeyConfigured) "2" Endif Debug-Output "OEMNSVCM.INF: Configured DO_NWLINK = "$(DO_NWLINK) ifstr(i) $(DO_NWLINK) == "YES" SetRegValue $(KeyConfigured) {"6",$(NoTitle),$(!REG_VT_SZ),"IPX"} else DeleteRegValue $(KeyConfigured) "6" Endif CloseRegKey $(KeyConfigured) Endif OpenRegKey $(KeyNetworkPolicies) "" "IP" $(MAXIMUM_ALLOWED) KeyIP ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNetworkPolicies) {"IP", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIP endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(KeyIP) "" "Address Resolution Providers" $(MAXIMUM_ALLOWED) KeyIPARP ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIP) {"Address Resolution Providers", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPARP endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(KeyIPARP) "" "Available" $(MAXIMUM_ALLOWED) KeyIPARPAvail ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPARP) {"Available", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPARPAvail endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyIPARPAvail) {"2",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F6F-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPARPAvail) {"11",$(NoTitle),$(!REG_VT_SZ),"{AD518629-02B4-11d1-8FF9-00A0C925D248}"} SetRegValue $(KeyIPARPAvail) {"5",$(NoTitle),$(!REG_VT_SZ),"{A18C57F8-17DA-11d1-8FFF-00A0C925D248}"} SetRegValue $(KeyIPARPAvail) {"12",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F70-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPARPAvail) {"6",$(NoTitle),$(!REG_VT_SZ),"{FA85E061-FFBB-11d1-85E0-00A0C9249033}"} CloseRegKey $(KeyIPARPAvail) Endif OpenRegKey $(KeyIPARP) "" "Configured" $(MAXIMUM_ALLOWED) KeyIPARPConfig ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPARP) {"Configured", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPARPConfig endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: IP Configured DO_TCPIP = "$(DO_TCPIP) ifstr(i) $(DO_TCPIP) == "YES" SetRegValue $(KeyIPARPConfig) {"2",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F6F-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPARPConfig) {"11",$(NoTitle),$(!REG_VT_SZ),"{AD518629-02B4-11d1-8FF9-00A0C925D248}"} SetRegValue $(KeyIPARPConfig) {"5",$(NoTitle),$(!REG_VT_SZ),"{A18C57F8-17DA-11d1-8FFF-00A0C925D248}"} SetRegValue $(KeyIPARPConfig) {"12",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F70-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPARPConfig) {"6",$(NoTitle),$(!REG_VT_SZ),"{FA85E061-FFBB-11d1-85E0-00A0C9249033}"} else DeleteRegValue $(KeyIPARPConfig) "2" DeleteRegValue $(KeyIPARPConfig) "11" DeleteRegValue $(KeyIPARPConfig) "5" DeleteRegValue $(KeyIPARPConfig) "12" DeleteRegValue $(KeyIPARPConfig) "6" Endif CloseRegKey $(KeyIPARPConfig) Endif CloseRegKey $(KeyIPARP) Endif CloseRegKey $(KeyIP) Endif OpenRegKey $(KeyNetworkPolicies) "" "IPX" $(MAXIMUM_ALLOWED) KeyIPX ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyNetworkPolicies) {"IPX", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPX endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(KeyIPX) "" "Address Resolution Providers" $(MAXIMUM_ALLOWED) KeyIPXARP ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPX) {"Address Resolution Providers", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPXARP endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) OpenRegKey $(KeyIPXARP) "" "Available" $(MAXIMUM_ALLOWED) KeyIPXARPAvail ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPXARP) {"Available", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPXARPAvail endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) SetRegValue $(KeyIPXARPAvail) {"2",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F6F-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPXARPAvail) {"4",$(NoTitle),$(!REG_VT_SZ),"{A18C57F7-17DA-11d1-8FFF-00A0C925D248}"} SetRegValue $(KeyIPXARPAvail) {"1",$(NoTitle),$(!REG_VT_SZ),"{2399601D-BCBA-11d0-8FD7-00A0C925D248}"} CloseRegKey $(KeyIPXARPAvail) Endif OpenRegKey $(KeyIPXARP) "" "Configured" $(MAXIMUM_ALLOWED) KeyIPXARPConfig ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPXARP) {"Configured", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyIPXARPConfig endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: IPX Configured DO_NWLINK = "$(DO_NWLINK) ifstr(i) $(DO_NWLINK) == "YES" SetRegValue $(KeyIPXARPConfig) {"2",$(NoTitle),$(!REG_VT_SZ),"{CCBB7F6F-2087-11d1-9004-00A0C925D248}"} SetRegValue $(KeyIPXARPConfig) {"4",$(NoTitle),$(!REG_VT_SZ),"{A18C57F7-17DA-11d1-8FFF-00A0C925D248}"} SetRegValue $(KeyIPXARPConfig) {"1",$(NoTitle),$(!REG_VT_SZ),"{2399601D-BCBA-11d0-8FD7-00A0C925D248}"} else DeleteRegValue $(KeyIPXARPConfig) "2" DeleteRegValue $(KeyIPXARPConfig) "4" DeleteRegValue $(KeyIPXARPConfig) "1" Endif CloseRegKey $(KeyIPXARPConfig) Endif OpenRegKey $(KeyIPXARP) "" "LimitSAP" $(MAXIMUM_ALLOWED) KeyLimitSAP ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) CreateRegKey $(KeyIPXARP) {"LimitSAP", $(NoTitle), GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyLimitSAP endif ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) DeleteRegValue $(KeyLimitSAP) "Level" ifstr(i) $(DO_NWLINK) == "YES" ifstr(i) $(DO_TCPIP) == "YES" ifstr(i) $(!InstallCompatMode) != "YES" SetRegValue $(KeyLimitSAP) {"Level",$(NoTitle),$(!REG_VT_DWORD),0} Endif Endif Endif CloseRegKey $(KeyLimitSAP) Endif CloseRegKey $(KeyIPXARP) Endif CloseRegKey $(KeyIPX) Endif CloseRegKey $(KeyNetworkPolicies) Endif Ifstr(i) $(KeyNovellNWPolicies) != "" CloseRegKey $(KeyNovellNWPolicies) Endif ; ; Set bindings based on the protocols ; set NetRuleNWFSSoftwareBindable = {} ifstr(i) $(DO_NWLINK) != "NO" ; if doing IPX/SPX then bind to it set NetRuleNWFSSoftwareBindable = >($(NetRuleNWFSSoftwareBindable),"nwFileSys ipxTransport non non 100") endif ifstr(i) $(DO_TCPIP) != "NO" ; if doing TCP/IP then bind to it set NetRuleNWFSSoftwareBindable = >($(NetRuleNWFSSoftwareBindable),"nwFileSys tcpipTransport non non 100") endif Debug-Output "****OEMNSVCM.INF: NetRuleNWFSSoftwareBindable is: "$(NetRuleNWFSSoftwareBindable) Set TempKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\NetWareWorkstation\CurrentVersion\NetRules" OpenRegKey $(!REG_H_LOCAL) "" $(TempKeyName) $(MAXIMUM_ALLOWED) TempKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) ; ; Fix up the bindable value so we will show up in the bindings ; SetRegValue $(TempKey) {"Bindable", $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleNWFSSoftwareBindable)} ifint $(RegLastError) != $(!REG_ERROR_SUCCESS) Debug-Output "OEMNSVCM.INF: Failed to update Bindable" endif CloseRegKey $(TempKey) else Debug-Output "OEMNSVCM.INF: Failed to open key "$(TempKeyName) endif endif Exit ;----------------------------------------------------------------------- ; ; ; SECTION: UnattendedInstallOption: ; ; PURPOSE: This section is shelled to by the Install Option. It looks at the three MS Unattended variables and then ; sets the Novell specific variable for NWACU and the NWUnattended file. ; Our install for both setup.exe /ACU and Unattended install from MS then uses NWACU and the NWUnattended variables. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: None ; ; MODIFIES: None ; ;----------------------------------------------------------------------- [UnattendedInstallOption] read-syms GeneralConstants read-syms FileConstants ifstr(i) $(!STF_GUI_UNATTENDED) == "NO" ifstr(i) $(!STF_UNATTENDED) == "YES" set !NWACU = "YES" endif else-ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!NWUnattendedFile) == "" set !NWACU = "YES" set !NWUnattendedFile = $(!STF_UNATTENDED) set !NWUnattendedSection = $(!STF_UNATTENDED_SECTION) else-ifstr(i) $(!STF_UNATTENDED_SECTION) != "" set !NWUnattendedSection = $(!STF_UNATTENDED_SECTION) endif endif Return ;************************************************************************* ;----------Write-Unattended-Variables----------------------------------- ; ; ; SECTION: Write-Unattended-Variables: ; ; PURPOSE: This section writes the unattended variables to the ; registry. ; ; ARGUMENTS: None ; ; RETURNS: None ; ; REFERENCES: Called at end of install section and the update section ; ; MODIFIES: None ; ;************************************************************************* [Write-Unattended-Variables] read-syms GeneralConstants read-syms FileConstants read-syms InstallOption$(!STF_LANGUAGE) ; If the /U parameter is passed from Setupnw.exe then call this section to set the defaults. ; Add the values in the unattended file to the registry. set UnattendReturnStatus = STATUS_SUCCESSFUL ifstr(i) $(!NWUnattendedFile) != "" LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\nwsetup.dll" NwLibHandle ; LoadLibrary $(LoadDisk3Text) $(!STF_WINDOWSSYSPATH)"\"$(NwSetupDll) NwLibHandle SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(!P:NLSDirName)"\setupnw.hlp" $(!MinimumID) $(!MaximumID) LibraryProcedure LibResult $(NwLibHandle) NWUnattendedInstall $(!NWUnattendedFile) $(!P:Option) FreeLibrary $(NwLibHandle) endif Return $(UnattendReturnStatus) ;----------------------------------------------------------------------- ; LANGUAGES SUPPORTED ; ------------------- ; ; The languages supported by the OEM INF, For every language supported ; we need to have a separate text section for every displayable text ; section. ; ;----------------------------------------------------------------------- [LanguagesSupported] ENG, ENGLISH [OptionsTextENG] NWCMD = "Novell IPX Compatibility Mode" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cance&l" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ; ; Producer Info ; FunctionTitle = "Novell Compatibility Mode Setup" ; ; Software ; ProductSoftwareDescription = "Novell Compatibility Mode Driver" ProductNWCMDHDisplayName = "Novell IPX Compatibility Helper" ; ; Hardware ; ProductHardwareDescription = "This virtual adapter allows IPX applications "+ "to communicate over an IP network." [InstallOptionENG] ErrorMessageTitle = "IPX Compatibility Mode Error" NoTcpipMessageText = "TCPIP Protocol is NOT installed. IPX Compatibility Mode will "+ "not function correctly unless the TCPIP Protocol is reinstalled." ShellCodeErrorTitle = "Error: Novell IPX Compatibility Mode Adapter" ShellCodeErrorText = "Shell Code Error" LoadDisk3Text = "Please load the Novell Client for Windows NT "+ "disk 3 into drive " IPOnlyMessageText = "You currently have IPX Dial-Up Networking installed. It is "+ "not compatible with the IP-only version of the Novell Client. You must disable "+ "IPX Dial-Up Networking before installing the IP-only version of the Novell Client." NWIPInstalledMessage = "Cannot install IPX Compatibility Mode while NetWare/IP is installed." [Source Media Descriptions] 1 = "NetWare for Windows NT Setup Disk", TAGFILE = NWCMD.SYS [Files-Inf] 1, oemnsvcm.inf, SIZE=50000, DECOMPRESS [Files-NWCMD] 1, nwcmd.sys, SIZE=50000, DECOMPRESS 1, nwcmd2.sys, SIZE=50000, DECOMPRESS [Files-EXE] 1, cmdinfo.exe, SIZE=50000, DECOMPRESSDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.