;*********************************************************************** ; ; ODINSUP.INF ; ; Novell Ndis to ODI network logical adapter SETUP INF file. ; ;*********************************************************************** ; ; The following is the version info for Novell ; ;VeRsIoN=v4.51 Novell Client Install for Windows NT (970414) ;CoPyRiGhT=copyright 1992-1998, by Novell, INC. All rights reserved. [Identification] OptionType = NetAdapter [PlatformsSupported] ISA MCA EISA PCI "Jazz-Internal Bus" [Options] ODINSUP [IRQChoices] IRQ_1 = "2",2 IRQ_2 = "3",3 IRQ_3 = "4",4 IRQ_4 = "5",5 [IOBaseAddrChoices] IOBase_1 = "0x300",768 IOBase_2 = "0x320",800 IOBase_3 = "0x340",832 IOBase_4 = "0x360",864 [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" NwSubsInf = "NWSUBS.INF" SoftwareType = "driver" Exit_Code = 0 DriverToLoad = "" ODINetWareEventFile = "%SystemRoot%\System32\nls\"$(NLSDirName)"\odintmsg.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ProductSoftwareName = "ODINSUP" ProductSoftwareImagePath = "\SystemRoot\system32\drivers\odinsup.sys" NetRuleSoftwareType = "odinsupSys ndisDriver odinsupDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """OdinsupSys"" yes no container" NetRuleSoftwareClass = {"odinsupDriver basic"} NetRuleSoftwareBindable = {"odinsupDriver odinsupAdapter non exclusive 100"} ProductHardwareName = "ODINSUP" NetRuleHardwareType = "odinsup odinsupAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"odinsupAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers ProductSoftwareDescription = "Novell NetWare ODI Support for NDIS Protocols Driver" ProductHardwareODINSUPDescription = "Novell NetWare ODI Support for NDIS Protocols Adapter" IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) Manufacturer = "Novell" ProductMajorVersion = 4 ProductMinorVersion = 00 ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) [date] Now = {} ? $(!LIBHANDLE) GetSystemDate ;------------------------------------------------------------------------------ ; 1. Identify To verify that this INF deals with the smae type of options ; as we are choosing currently. ; ; Input: none ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette Description ;------------------------------------------------------------------------------ [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------------ ; 2. ReturnOptions To return the option list supported by this INF and ; the localized text list representing the options. ; Input: $($0): Lang. used (ENG | FRN | ....) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; $($R1): Option List ; $($R2): Option Text List ; ;------------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------------ ; 2. InstallOption This section is shelled to by main installation processing ; ; Function: To copy files representing Options ; To configure the installed option ; To update the Registry for the installed option ; ; Input: $($0): Lang. to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy ( YES | NO ) ; $($4): DoCopy ( YES | NO ) ; $($5): DoConfig ( YES | NO ) ; ; Output: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED | ; STATUS_NOTSUPPORTED ; ;------------------------------------------------------------------------------ [InstallOption] set Status = STATUS_FAILED set Option = $($1) set !SrcDir = $($2) set !AddCopy = $($3) set !DoCopy = $($4) set !DoConfig = $($5) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto installoption else set Status = STATUS_NOLANGUAGE goto finish_InstallOption endif installoption = + ; ; Tell the common code that we're being called from "main install" ; ifstr(i) $(!NTN_Origination) != "NCPA" set !NTN_Origination = "install" endif ; ; Call the CommonSection ; shell "" CommonSection $(Option) set Status = $($R0) ifstr(i) $($R1) != "" set DriverToLoad = { $($R1) } else set DriverToLoad = "" endif Return $(Status) $(DriverToLoad) [NcpaInvocation] set Option = $(!NTN_InfOption) set !SrcDir = $(!STF_SRCDIR) Ifstr(i) $(!NTN_InstallMode) == install set !AddCopy = YES set !DoCopy = YES set !DoConfig = YES Else set !AddCopy = NO set !DoCopy = NO set !DoConfig = NO Endif shell "" CommonSection $(Option) set Status = $($R0) Return $(Status) [CommonSection] StartWait set Option = $($0) set-subst LF = "\n" read-syms GeneralConstants ; ; Find what NLS directory is being used ; set NovellParameters = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Parameters" Debug-OutPut "NovellParameters is "$(NovellParameters) OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set NLSDirName = *($(LanguageList), 4) endif CloseRegKey $(KeyNovellParameters) Endif ; ; Get NT version ; set CurrentVersion = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion" OpenRegKey $(!REG_H_LOCAL) "" $(CurrentVersion) $(MAXIMUM_ALLOWED) CurrentVersionKey ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) GetRegValue $(CurrentVersionKey) "CurrentVersion" VersionList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set VersionListData = *($(VersionList), 4) Split-string $(VersionListData) "." SplitVersionList Set NTMajorVersion = *($(SplitVersionList), 1) Set NTMinorVersion = *($(SplitVersionList), 3) Debug-OutPut "ODINSUP.INF: Windows NT current version is "$(VersionListData) Debug-OutPut "ODINSUP.INF: Windows NT Major version is "$(NTMajorVersion) Debug-OutPut "ODINSUP.INF: Windows NT Minor version is "$(NTMinorVersion) else Debug-Output "ODINSUP.INF: Error getting NT version" endif CloseRegKey $(CurrentVersionKey) else Debug-Output "ODINSUP.INF: Error opening "$(CurrentVersion) endif read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE) read-syms InstallOption$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Debug-Output "ODINSUP.INF: Begin Install Mode = "$(!NTN_InstallMode) Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "ODINSUP.INF: Cannot configure the Novell ODINSUP driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto Warning endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set IRQValue = *($(IRQList), 2) set IOBaseAddrValue = *($(IOBaseAddrList), 1) set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "ODINSUP.INF: installadapter "$(ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) $(!NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output $(!STF_ONTEXTINFNAME)": ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif goto adapteroptions configureadapter = + Debug-Output "ODINSUP.INF: configureadapter" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "ODINSUP.INF: Cannot find component product key "$(!NTN_RegBase) goto fatalregistry Endif Endif Debug-Output "ODINSUP.INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: FindService shell failure "$($ShellCode) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "ODINSUP.INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "ODINSUP.INF: Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} Set OdiCurBindCardName = "" EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "Bind" Set OdiCurBindCardName = $(ValueData) Debug-Output "ODINSUP is Currently bound to "$(OdiCurBindCardName) endif EndForListDo set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex))) ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQList), 2) endif set IOBaseAddrValue = *($(IOBaseAddrList), + ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif goto adapteroptions adapteroptions = + Debug-Output "ODINSUP.INF: adapteroptions, NTN_RegBase = "$(!NTN_RegBase) set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) ; ; In this block we will determine which installed ODI adapter to bind ; ODINSUP too. If multiple ODI adapters are install the user will be ; allowed to select from a dialog box which adapter to bind too. ; set NetworkCardsKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards" OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKeyName) $(MAXIMUM_ALLOWED) NetCardsKey Ifstr(i) $(NetCardsKey) == "" Debug-Output "Can't Open Registry key "$(NetworkCardsKeyName) set CommonStatus = STATUS_USERCANCEL Else ; ; Get a list of all installed network cards ; EnumRegKey $(NetCardsKey) NetCardsList ForListDo $(NetCardsList) Set CardNumber = *($($), 1) Ifstr(i) $(CardNumber) != "" Ifstr(i) $(FirstTime) == 1 set CardList = $(CardNumber) Set FirstTime = 0 Else set CardList = >($(CardList), $(CardNumber)) Endif Endif EndForListDo Set FirstTime = 0 ; ; Run though the list of installed adapters and create a list of installed ; ODI Adapters. ; ForListDo $(CardList) Set Card = $($) OpenRegKey $(NetCardsKey) "" $(Card) $(MAXIMUM_ALLOWED) CardKey Ifstr(i) $(CardKey) == "" Debug-Output "ODINSUP.INF: Can't open card "$(Card) Else GetRegValue $(CardKey) "OdiAdapter" OdiValueList Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set OdiAdapter = *($(OdiValueList), 4) Ifstr(i) $(OdiAdapter) == "1" GetRegValue $(CardKey) "Title" OdiTitleValues Set OdiTitle = *($(OdiTitleValues), 4) GetRegValue $(CardKey) "ProductName" OdiNameValues Set OdiName = *($(OdiNameValues), 4) Ifstr(i) $(FirstTime) == 1 Set OdiOnlyList = $(Card) Set OdiTitleList = $(OdiTitle) Set OdiCardList = $(OdiName) set FirstTime = 0 Else set OdiOnlyList = >($(OdiOnlyList), $(Card)) Set OdiTitleList = >($(OdiTitleList), $(OdiTitle)) Set OdiCardList = >($(OdiCardList), $(OdiName)) Set FirstTime = 2 Endif Endif Endif CloseRegKey $(CardKey) Endif EndForListDo Debug-Output "OdiCardList = "$(OdiCardList) CloseRegKey $(NetCardsKey) Endif ; ; If there is only one ODI Adapter installed bind to that adapter otherwise ; allow the user to select. ; Ifstr(i) $(FirstTime) == 1 Debug-Output "ODINSUP.INF NO ODI Adapters installed." set DlgType = "MessageBox" set STF_MB_TITLE = $(NoODIAdapterInstalledTitle) set STF_MB_TEXT = $(NoODIAdapterInstalledText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "NoODIAdapter" goto end Endif Ifstr(i) $(FirstTime) == 0 Set OdiBindToAdapter = "" Debug-Output "ODINSUP.INF: Only ONE ODI Adapter Installed "$(OdiBindToAdapter) Else ; ; allow the user the select the adapter to bind too. ; Debug-Output "ODINSUP.INF More than one ODI Adapter "$(OdiCardList) LoadLibrary $(LoadDisk2Text) $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwsetupr.dll" NwLibHandle Ifstr(i) $(OdiCurBindCardName) != "" Debug-Output "OdiCurBindCardName = "$(OdiCurBindCardName) Set DefaultOdiTitle = *($(OdiTitleList), ~($(OdiCardList), $(OdiCurBindCardName))) Endif Ifstr(i) $(DefaultOdiTitle) == "" Set DefaultOdiTitle = *($(OdiTitleList), 1) Endif Debug-Output "DefaultOdiTitle = "$(DefaultOdiTitle) SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\setupnw.hlp" $(!MinimumID) $(!MaximumID) read-syms OdinsupDlg$(!STF_LANGUAGE) ui start "ODINSUP" $(NwLibHandle) ui pop 1 ifstr(i) $(DLGEVENT) == "BACK" set AdapterSelected = "" else Set AdapterSelected = *($(DefaultOdiTitle), 1) endif Debug-Output "AdapterSelected = "$(AdapterSelected) Ifstr(i) $(AdapterSelected) == "" Debug-Output "ODINSUP.INF: Cancel Selected" goto end Else Set OdiBindToAdapter = *($(OdiCardList), ~($(OdiTitleList), $(AdapterSelected))) Endif FreeLibrary $(NwLibHandle) Endif set IRQValueIndex = "3" set IOBaseAddrIndex = "300" goto nextstep nextstep = + ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait installproduct = + ifint $(OldVersionExisted) == $(FALSE) Debug-Output "ODINSUP.INF: First Time Install" Shell $(UtilityInf), AddSoftwareComponent + $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), + $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), + "kerneldisable", + ; "kernelautostart", + "NDIS", + {"+ODI Drivers"}, + "", + $(ODINetWareEventFile) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) Set KeyLinkage = $($R5) SetRegValue $(KeyLinkage) {"OtherDependencies",$(NoTitle),$(!REG_VT_MULTI_SZ),{"+ODI Drivers"}} CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "ODINSUP.INF: AddSoftwareComponent Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {Hidden,$(NoTitle),$(!REG_VT_DWORD),1},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {PathName,$(NoTitle),$(!REG_VT_SZ),$(!STF_CWDDIR)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "ODINSUP.INF: AddValueList Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)} } shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "ODINSUP.INF: AddValueList Registry error "$(RegistryErrorIndex) goto fatalregistry endif endif ; add ODINSUP at board two or later Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName),"","","2" ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddHardwareComponent Shell error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "ODINSUP.INF: AddHardwareComponent Registry error "$(RegistryErrorIndex) CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Hidden,$(NoTitle),$(!REG_VT_DWORD),1},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, + {Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)}} shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "ODINSUP.INF: AddValueList Registry error "$(RegistryErrorIndex) CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "OEMNADNX.INF: GetBusTypeNum ShellCode error "$($ShellCode) goto ShellCodeError endif set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues), + ~($(IOBaseAddrList),$(IOBaseAddrIndex))) ; ; BUG, BUG Need to get OdinsupBindName from the registry, if more than one ; board is in the registry need to do a dialog box and allow the user to ; select the adapter. ; ; For now use the last adapter found that's not a Token Ring adapter since ; Odinsup does not support Token Ring at this time. ; ; set OdiModulesName = $(!NTN_ServiceBase)"\OdiLoad\ODI_Modules" ; OpenRegKey $(!REG_H_LOCAL) "" $(OdiModulesName) $(MAXIMUM_ALLOWED) KeyOdiModules ; Ifstr(i) $(KeyOdiModules) == "" ; goto fatalregistry ; Endif ; EnumRegKey $(KeyOdiModules) CardList ; ; CloseRegKey $(KeyOdiModules) ; ; set OdinsupBindName = $(Odi"ne2000" ; ; set FoundEtherCard = 0 ; ; ForListDo $(CardList) ; set CardName = *($($),1) ; Split-String $(CardName) " " CardNameParts ; set CardBaseName = *($(CardNameParts),1) ; Ifstr(i) CardBaseName != "Token" ; set FoundEtherCard = 1 ; set OdinsupBindName = $(CardBaseName) ; Debug-Output "ODINSUP.INF: Bind to adapter "$(CardBaseName) ; Endif ; EndForListDo ; ; Ifint $(FoundEtherCard) == 0 ; Debug-Output "ODINSUP.INF: No ethernet adapters found" ; Debug-Output "ODINSUP.INF: Odinsup will NOT work on Token Ring" ; Endif ifstr(i) $(OdiBindToAdapter) == "" set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BoardInstance,$(NoTitle),$(!REG_VT_DWORD),1} } Else set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {Bind,$(NoTitle),$(!REG_VT_SZ),$(OdiBindToAdapter)},+ {BoardInstance,$(NoTitle),$(!REG_VT_DWORD),1} } Endif shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: AddValueList ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "ODINSUP.INF: AddValueList Registry error "$(RegistryErrorIndex) goto fatalregistry endif EndWait Set DriverToLoad = $(ProductSoftwareName) goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Debug-Output "ODINSUP.INF: removeadapter" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "ODINSUP.INF: RemoveSoftwareComponent" Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Debug-Output "ODINSUP.INF: RemoveHardwareComponent" Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: RemoveHardwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + Debug-Output "ODINSUP.INF: UpgradeSoftware" ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Split-String $(!NTN_Infname), "\", FilenameList QueryListSize ListSize $(FilenameList) set !UG_Filename = *($(FilenameList), $(ListSize)) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) == $(KeyNull) goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + Debug-Output "ODINSUP.INF: Successful; installing [InstallOption], DoCopy = "$(!DoCopy) goto installstep1 installstep1 = + goto end abandon = + Debug-Output "ODINSUP.INF: abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: RemoveHardwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ODINSUP.INF: RemoveSoftwareComponent ShellCode error "$($ShellCode) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatal = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "ShellCodeError" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) $(DriverToLoad) [Install-Option] set STF_VITAL = "" ifstr(i) $(!AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(!DoCopy) == "YES" CopyFilesInCopyList endif ifstr(i) $(!DoConfig) == "YES" endif Exit [Install-Update] Debug-Output "ODINSUP.INF: Install-Update" set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(!STF_SRCDIR) $(!STF_WINDOWSSYSPATH) CopyFilesInCopyList exit ;----------------------------------------------------------------------- ; LANGUAGES SUPPORTED ; ------------------- ; ; The languages supported by the OEM INF, For every language supported ; we need to have a separate text section for every displayable text ; section. ; ;----------------------------------------------------------------------- [LanguagesSupported] ENG, ENGLISH [OptionsTextENG] ODINSUP = "Novell NetWare ODI Support for NDIS Protocols Adapter (ODINSUP)" [OdinsupDlgENG] IDH_NETWARENDISODI = 907 Help = "&Help" OK = "OK" Continue = "Continue" Cancel = "Cancel" Advanced = "&Advanced" DlgType = "RadioCombination" DlgTemplate = "ONELIST" Caption = "NetWare NDIS over ODI (ODINSUP) Setup" Label1 = "Installed ODI Adapters" EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} HelpContext = $(IDH_NETWARENDISODI) ComboListItemsIn = { OdiTitleList } ComboListItemsOut = { DefaultOdiTitle } NotifyFields = { "NO" } [FileConstantsENG] ProductSoftwareTitle = "Novell NetWare ODI Support for NDIS Protocols Driver" ProductHardwareODINSUPTitle = "Novell NetWare ODI Support for NDIS Protocols Adapter" ProCaption = "Windows NT Setup" ProCancel = "Cance&l" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" [DialogConstantsENG] Help = "&Help" Exit = "&Cancel" OK = "&OK" HelpContext = "" Continue = "C&ontinue" Cancel = "C&ancel" [FileDependentDlgENG] DlgType = "RadioCombination" DlgTemplate = "ONELIST" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Label1 = "&IRQ Level:" Label2 = "I/O &Port Base Addr:" Combo1List = $(IRQList) Combo1Out = $(IRQValue) Combo2List = $(IOBaseAddrList) Combo2Out = $(IOBaseAddrValue) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} NotifyFields = {NO, NO} HelpContext = $(!IDH_DB_ODINSUP_INS) ;----------InstallOptionENG------------------------------------------------- ; ; InstallOptionENG: ; ; This section has all of the strings that are displayed on the screen. ; They are seperated so that the file can be easily transtated. ; ;------------------------------------------------------------------------ [InstallOptionENG] FunctionTitle = "Novell NetWare ODI Support for NDIS Setup" ShellCodeErrorTitle = "Error: Novell NetWare ODI Support for NDIS Setup" ShellCodeErrorText = "Shell Code Error" NoODIAdapterInstalledTitle = "NetWare ODINSUP Setup" NoODIAdapterInstalledText = "There are NO ODI Adapters installed in "+ "this Computer. Please install an ODI Adapter and then install ODINSUP." LoadDisk2Text = "Please load the Novell NetWare Client for Windows NT "+ "disk 2 into drive " [Source Media Descriptions] 1 = "Windows NT Setup Disk #1", TAGFILE = disk1 2 = "Windows NT Setup CD-ROM Disk", TAGFILE = disk2 3 = "NetWare for Windows NT Setup Disk", TAGFILE = ODINSUP.SYS [Files-Inf] 3, ODINSUP.inf, SIZE=1000 [Files-ODINSUP] 3, odinsup.sys, SIZE=72192Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.