1. mdmzyx28.zip Driver
2. MDMZYX28.TXT File Contents

MDMZYX28.TXT Driver File Contents (mdmzyx28.zip)

Dear customer,                                         Vienna, 11/12/1996


-----------------------------------------------------------------------------
    Update of the European MDMZYXLG.INF modem definition script file
          for the ZyXEL Elite 2864, Omni 288S analog V.34 modems
       and the ZyXEL Elite 2864I, Omni TA128 ISDN terminal adapters

               Now this file is for both operating systems:
                     Microsoft Windows95 v4.00.950(a)
           Microsoft WindowsNT v4.00.1381 (aka "official release")
-----------------------------------------------------------------------------





Please copy this new "MDMZYXLG.INF" (internal rev. 53, 11/16/1996) into your
"\WINDOWS\INF\" directory (which is a hidden (!) directory) and overwrite
your old file. Check that there don't exist any "OEMx.INF" (x is a digit)
files for the ZyXEL modems. You'll have to look into the "OEMx.INF" by
opening it with the NOTEPAD.EXE (or any other ASCII editor). If the "OEMx.INF"
starts with the header which lets you assume it is for ZyXEL modems, then
please delete this file !
Then install your ZyXEL Elite 2864 modem entries once again by using the
"modems" wizard in the control panel - the Windows95 registry will be
updated automatically.


following modifications and enhancements have been done:
--------------------------------------------------------
internal release 53 (11/16/96)
   + added UNIMODEM ID-code for O288S v1.14
   + added again the "Voice" parameter in the parameters list for analog
     E2864 or O288S
internal release 52 (10/15/96)
   + added UNIMODEM ID-code for E2864 v1.14
   + modfied some minor bits for Windows DUN callback feature
     on WindowsNT v4.00.1381 RAS
internal release 50 (10/15/96)
   - delete the "Voice" parameter in the parameters list for analog
     E2864 or O288S
internal release 48 (10/04/96)
   + added one more entry "ZyXEL ISDN HDLC with MP-PPP (RFC-1717)"
     for Multiple Link PPP connection
internal release 42 to 47: minor fixed, some specific bits changed.
internal release 41 (07/23/96)
   + modified the max. data packet length value for V.120
     ATCL256 -> ATCL252 (the four bytes overhead in earlier
     versions of this INF file caused problems to connect
     to CompuServe or Ascent Routers in the USA)
internal release 40 (07/22/96)
   + added S118.3=1 (enable CHAP) for PPP protocol (ATB40)
     (please read the PPP_MP.TXT file, last paragraph !)
internal release 39 (07/18/96)
   + added AdSi for V.110 for 1TR6 (S110=199 for 19k2 and S110=64 for 38k4)
   + modified CONNECT response strings for analog protocols:
     V22  -> V.22
     V22b -> V.22b
     V32  -> V.32
     V34  -> V.34
     V32b    unchanged !
internal release 38 (07/12/96)
   + added ISDN and MODEM dial switching for the ZyXEL Elite 2864I
     using the dial parameter "Tone" (_M_FV) for MODEM (analog) calls and
     using the dial parameter "Puls" (_I_MV) for ISDN (digital) calls with
     the default B-channel protocols (X.75 for DSS1 and 1TR6, V.120 for USA)
   + modified the settings for ISDN B-channel protocol V.120 (to access
     CompuServe's ISDN nodes in Europe with a block length of 256 bytes)
   + modified the settings for ISDN B-channel protocol BTX (with new
     ZyXEL Elite 2864I ISDN firmware v2.03 (release date 07/12/96) to
     the max. block length 125 bytes.
   + modified (shortened) the user friendly text entries for the variouse
     B-channel protocols - so now these entries are for both ISDN terminal
     adapters: ZyXEL Elite 2864I and Omni TA128
   + disabled (by default) V.42bis data compression on ISDN B-channel
     protocols X.75 and V.120 to be backward compatible if using new
     Elite 2864I ISDN firmware v2.03 or Omni TA128 firmware v1.00
   + enabled (by default) the capture to logfile option.
     Now all UNIMODEM commands will be protocoled in the
     "\WINDOWS\MODEMLOG.TXT ASCII text file.
-----------------------------------------------------------------------------
   + added the voice commands for ZyXEL Elite 2864 and Omni 288S (analog
     modems only) to be used with Microsoft's UNIMODEM/V comm port driver
     upgrade for Windows95.
     These voice commands are still in BETA TEST !!!
-----------------------------------------------------------------------------


internal release 37 (01/10/96)
   + added V.110 with 38k4 and 57k6 bps async. user rate (for Japan only !)
   + added entry for Omni 288S serial with Windows95 Plug&Play feature
   + fixed a bug of fax receiving for Elite ISDN modem default settings
   + added FAX to PRINTER (HP DeskJet-500) for A4 pages
   + fixed a bug in SPEECH v2.x entry
   + fixed a bug for f/w v1.11 (and below): &K44 is not recognized !
   + added support for "ZyXEL Elite 2864I ISDN" firmware v2.00
   + added more userfriendly entries for ZyXEL Elite 2864I ISDN f/w v2.00
         MODEM & FAX connection
         ISDN connection
         SPEECH connection (therefore it is recommended that you use
                            the ISDN f/w v2.10 coming later this year)
         async PPP to sync HDLC conversion
         async SLIP conversion
   + added support for fax receiving to DRAM  & offline retrieving from it
     with the in MS Exchange95 v4.0 integrated "MS At Work Fax"



note: because ZyXEL R&D Dept. Taiwan is developing many new features this
      MDMZYXLG.INF will also be modified again in the future !
      Please have a regularily look to our Internet ftp-server where you
      always will find the most updated version:
      ftp://ftp.zyxel.co.at/pub/users/zyxel/software/Windows95/mdmzyx28.zip


      Any bugreports or suggestions for new modifications are welcome !




; =========================================================
; MDMZYX28.INF    10/16/96
; =========================================================
; by SES Datensysteme HandelsgesmbH.
;    (authorized ZyXEL Distributor for Austria)
;    Sautergasse 20/3/5
;    VIENNA, VIE, A-1170
;    AUSTRIA
;    E-mail:  100042.1170@compuserve.com (Manfred Recla)
;             support@zyxel.co.at
;    FTP:     ftp://ftp.zyxel.co.at/pub/users/zyxel/
;    WWW:     http://www.zyxel.co.at/zyxel/
; ==========================================================
;  This Modem Setup File has not yet been approved by
;  Microsoft !
;
;  internal version number of this file: 52
;
;  10/15/96: (52)
;   + added UNIMODEM ID-code for E2864 v1.13c ->1.14
;   + modfied some minor bits for Windows DUN callback feature
;     on WindowsNT v4.00.1381 RAS
;
;  10/15/96: (50)
;   - delete the "Voice" parameter in the parameters list for analog
;     E2864 or O288S
;
;  10/04/96: (48)
;   + added one more entry "ZyXEL ISDN HDLC with MP-PPP (RFC-1717)"
;     for Multiple Link PPP connection
;
;  07/23/96: (41)
;   + modified the max. data packet length value for V.120
;     ATCL256 -> ATCL252 (the four bytes overhead in earlier
;     versions of this INF file caused problems to connect
;     to CompuServe or Ascent Routers in the USA)
;
;  07/22/96: (40)
;   + added S118.3=1 (enable CHAP) for PPP protocol (ATB40)
;     (please read the PPP_MP.TXT file, last paragraph !)
;
;  07/18/96: (39)
;   + added AdSi for V.110 for 1TR6 (S110=199 for 19k2 and S110=64 for 38k4)
;   + modified CONNECT response strings for analog protocols:
;     V22  -> V.22
;     V22b -> V.22b
;     V32  -> V.32
;     V34  -> V.34
;     V32b    unchanged !
;
;  07/12/96: (38)
;  + support for ZyXEL Elite 2864I firmware v2.03
;  + support for ZyXEL Omni TA128 firmware v1.00
;  + several minor modifications in user friendly text entries
;    for bot ZyXEL Elite 2864I and Omni TA128 ISDN terminal adapter
;  + real Windows95 Plug&Play feature
;  + disabled (by default) V.42bis data compression on ISDN B-channel
;    protocols X.75 and V.120 to be backward compatible if using new
;    Elite 2864I ISDN firmware v2.03 or Omni TA128 firmware v1.00
;
;  01/10/96: (37)
;  + added V.110/38k4 and V.110/57k6 for Japan
;
;  01/04/96: (36)
;  + added Omni 288S Model with Plug&Play Feature
;
;  12/19/95: (35)
;  - fixed bug for FAX receiving in default settings
;    for Elite 2864I - Fax ExitCommand = "ATZ" removed
;
;  12/15/95: (34)
;  + added FAX to PRINTER (HP DJ-500)
;
;  12/12/95: (33)
;  + fixed bug in the entries for firmware v1.11 (and below):
;    position of "compression_on=&K4&K44" changed to section [ISDN.v2]
;    added "compression_on=&K4" to section [ISDN.v1]
;
;  12/11/95: (32)
;  + fixed bug for SPEECH v2.x entry: changed "ATB3<cr>" to "AT<cr>"
;
;  12/10/95  12:39 pm (31)
;  - deleted the HKR, Monitor,, "ATS0=0" entry - so now
;    dial-in is possible again
;
;  12/10/95  02:20 am (30)
;  + added support for off-line fax receiving into DRAM
;  + added support fax commands (for MS Exchange / At Work Fax)
;  + added support for Elite ISDN firmware v2.00
; ----------------------------------------------------------
;  You will find the new firmware on following sites:
;  ZyXEL Taiwan BBS: +886-35-787045, ZyX  19k2
;  ZyXEL Taiwan BBS: +886-35-776274, V.34 28k8
;  InterNet:
;  ftp://ftp.zyxel.co.at/pub/users/zyxel/firmware/2864/Elite/
-------------------------------------------------------------