DS28CZ04 Eval Kit Readme
QUICK START
1. Before beginning, make sure the following equipment is available:
* DS28CZ04EVKIT (contains DS28CM00 EV board and CMAXQUSB module)
* Windows XP/2000 computer with a spare USB port
2. Do the following before connecting to the PC:
* Select 5V logic by setting the CMAXQUSB VDD SELECT jumper.
* Install the master reset jumper S5 (text label MRZ) to Vcc (jumper center
pin to pin on left) and the address jumpers S1 (text label A1) and S2 (text label A2)
on the DS28CZ04 eval board. (See Figure 2)
* Connect the eval board to the CMAXQUSB board with the 20-pin connector at location P3
(the I2C/SMBus pins).
3. Download the evaluation software from Maxim’s eval kit software page mentioned above or
from the eval kit’s quickview: http://www.maxim-ic.com/DS28CZ04EVKIT). The evaluation
software will be provided as a *.zip archive file. Unzip the archive’s contents into an
empty or newly-created directory.
4. Connect the USB cable between the CMAXQUSB and the computer. When the CMAXQUSB board
is plugged in for the first time, the windows plug-and-play system detects the new hardware
and automatically runs the Add New Hardware Wizard. Be sure to specify the search location
for the device driver, which will be the FTDIDriver subdirectory in the directory where
the evaluation software files were unzipped.
5. During device driver installation, Windows displays a warning message indicating that the
device driver Dallas Semiconductor Maxim uses does not contain a digital signature. This
is not an error condition. It is safe to proceed with the installation.
6. The Microsoft .NET framework Version 1.1 is required for the program to run. If it is
not installed, please see the following website for download and installation instructions:
http://msdn.microsoft.com/netframework/downloads/framework1_1/
7. Start the EV Kit software by double-clicking the file, DS28Cz04_Evaluation_Program.exe,
in the file folder containing the unzipped eval software files.
8. If any problems occur during device driver installation, refer to Application Note 3601:
Troubleshooting Windows Plug-and-Play and USB for Maxim Evaluation Kits for more details.
It is located here:
http://www.maxim-ic.com/appnotes.cfm/appnote_number/3601.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.