1. 1645BR10.ZIP Driver
2. MAX1781.INI File Contents

MAX1781.INI Driver File Contents (1645BR10.ZIP)

; Maxim Smart Battery System Device Definition
; For use with SMBK GUI

;---------------------------------------------------------------------------
; [address] section defines the SMBus device address
; and the display name that appears in the tab.
;
; For a smart battery, the SMBus device address must be 0x16.
;
[address]
0x16=MAX1781 Smart Battery

;---------------------------------------------------------------------------
; [system] section defines the large bitmapped image with key parameters
; bitmap = filename of image to display
; <element> = <x> , <y> , <width> , <height>
;
[system]
bitmap=1781.bmp
;
; Dimensions of the standard sbs parameters
0x08Temperature=288,424,129,24
0x09Voltage=536,88,57,24
0x0ACurrent=440,522,57,24
0x0DRelativeStateOfCharge=592,48,97,24
0x0FRemainingCapacity=592,16,97,24
RemainingCapacityLabel=448,16,137,24
RelativeStateOfChargeLabel=448,48,137,24
;
; Dimensions of the thermometer mercury
Thermometer=349,456,5,30
;
; Dimensions of the fuel gauge
FuelGage=616,80,33,506
;
ReadCountText=112,456,129,24
UsePECsCheckBox=104,490,97,17
BatchReadCheckBox=104,506,97,17
ReadStatusButton=104,528,75,25
;
; Dimensions of the optional manufacturer data displays
cellVoltage1=544,452,57,24
cellVoltage2=544,368,57,24
cellVoltage3=544,286,57,24
cellVoltage4=544,204,57,24

;---------------------------------------------------------------------------
; Manufacturer data block
;
; Up to twelve variables may be parsed from the manufacturer data block.
;
; Numeric values are described by the following format:
;
; <MfrDataVariable> = <byte offset> , <format>
;
;   <MfrDataVariable> may be any arbitrairy name.
;   There is special handling for the cell voltage variables:
;	cellVoltage1
;	cellVoltage2
;	cellVoltage3
;	cellVoltage4
;
;   <byte offset> is a decimal number from 0 to 31
;
;   <format> must be one of the following formats.
;    Suffix _MsbLsb means offset+0 is high byte, offset+1 is low byte
;    Suffix _LsbMsb means offset+0 is low byte, offset+1 is high byte
;	uint8		8 bit integer 0..255
;	int8		8 bit integer -128..+127
;	hex8		8 bit hexadecimal value 0x00..0xFF
;	uint16_MsbLsb	16 bit integer 0..65535
;	uint16_LsbMsb	16 bit integer 0..65535
;	int16_MsbLsb	16 bit integer -32768..+32767
;	int16_LsbMsb	16 bit integer -32768..+32767
;	hex16_MsbLsb	16 bit hexadecimal value 0x0000..0xFFFF
;	hex16_LsbMsb	16 bit hexadecimal value 0x0000..0xFFFF	
;
; One-bit flags are described by the following format:
;
; <MfrDataVariable> = <byte offset> , bit<0..7> ?" <text-for-one> ":" <text-for-zero> "
;
;	bit0		flag in bit 0 (0x01) (least significant bit)
;	bit1		flag in bit 1 (0x02)
;	bit2		flag in bit 2 (0x04)
;	bit3		flag in bit 3 (0x08)
;	bit4		flag in bit 4 (0x10)
;	bit5		flag in bit 5 (0x20)
;	bit6		flag in bit 6 (0x40)
;	bit7		flag in bit 7 (0x80) (most significant bit)
;
[0x22mfgrdata]
;firmwareVersion=0,hex16_MsbLsb
cellVoltage1=2,uint16_MsbLsb
cellVoltage2=4,uint16_MsbLsb
cellVoltage3=6,uint16_MsbLsb
cellVoltage4=8,uint16_MsbLsb
;Temp=10,uint16_MsbLsb
;AIN0=12,uint16_MsbLsb
;FST_COMP_V=14,uint16_MsbLsb
;SCD_COMP_V=16,uint16_MsbLsb
;DIS_CAP=18,uint16_MsbLsb
;POR_CNT=20,uint16_MsbLsb
;ADC_CNT=22,uint8
;
;MOSFET STATUS and Flag bits
Pre-FET=23,bit0?"ON":"OFF"
Chg-FET=23,bit1?"ON":"OFF"
Dis-FET=23,bit2?"ON":"OFF"
;LED_Flag=23,bit3?"5 LEDS":"4 LEDS"
Fst_Comp=23,bit4?"Done":"Pending"
Scd_Comp=23,bit5?"Done":"Pending"
Fst_Lrn_Flag=23,bit6?"Set":"Cleared"
Scd_Lrn_Flag=23,bit7?"Set":"Cleared"
;
Cell_Supervisor=24,hex8