; Maxim Smart Battery System Device Definition ; For use with MAX1780EVKIT GUI ;--------------------------------------------------------------------------- ; [address] section defines the SMBus device address ; and the display name that appears in the tab. ; ; For a smart charger, the SMBus device address must be 0x12. ; [address] 0x12=Generic Smart Battery Charger ;--------------------------------------------------------------------------- ; [registers] section lists each command ; <hex command byte> = <R | W | RW> , <CommandName> , <bits | unit> ; If the command name units is "bits", the command bits ; are defined in a section [CommandName]. ; [registers] 0x11=Read,SpecInfo,bits 0x12=Write,MODE,bits 0x13=Read,STATUS,bits 0x14=Write,CURRENT,miliAmps 0x15=Write,VOLTAGE,miliVolts 0x16=Write,AlarmWarning,bits 0x20=RW,Something,units 0x21=RW,Street Cred,miliDREs 0x22=RW,Intelligence,kBush 0x23=RW,World Dominance,nBill ;--------------------------------------------------------------------------- ; Each command name whose units are defined as "bits" ; gets a section where each bit is named. ; Keys are 16-bit bit masks: four hexadecimal characters with 0x prefix. ; Bits whose name is left blank will display as "reserved". ; [SpecInfo] 0x0001=CHARGER_SPEC1 0x0002=CHARGER_SPEC2 0x0004=CHARGER_SPEC4 0x0008=CHARGER_SPEC8 0x0010=SELECTOR_SUPPORT [MODE] 0x0001=qINHIBIT_CHARGE 0x0002=wENABLE_POLLING 0x0004=ePOR_RESET 0x0008=rRESET_TO_ZERO 0x0010=tAC_PRESENT_MASK 0x0020=yBATTERY_PRESENT_MASK 0x0040=uPOWER_FAIL_MASK 0x0080=i 0x0100=o 0x0200=p 0x0400=aHOT_STOP 0x0800=s 0x1000=d 0x2000=f 0x4000=g 0x8000=h [STATUS] 0x0001=aCHARGE_INHIBITED 0x0002=bMASTER_MODE 0x0004=cVOLTAGE_NOTREG 0x0008=dCURRENT_NOTREG 0x0010=eLEVEL_2 0x0020=fLEVEL_3 0x0040=gCURRENT_OR 0x0080=hVOLTAGE_OR 0x0100=iRES_OR 0x0200=jRES_COLD 0x0400=kRES_HOT 0x0800=lRES_UR 0x1000=mALARM_INHIBITED 0x2000=nPOWER_FAIL 0x4000=oBATTERY_PRESENT 0x8000=pAC_PRESENT [AlarmWarning] 0x0001=ErrorCode 0x0002=ErrorCode 0x0004=ErrorCode 0x0008=ErrorCode 0x0010=Fully Discharged 0x0020=Fully Charged 0x0040=Discharging 0x0080=Initializing 0x0100=Remaining Time Alarm 0x0200=Remianing Capacity 0x0400= 0x0800=Terminate Discharge 0x1000=Over Temperature 0x2000=Other Alarm 0x4000=Terminate Charge 0x8000=Over Chage AlarmDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.