Additional Information
Aztech AT3000 V1.00
This file contains additional information and changes about the
various software that was not available at printing time.
Installing under Windows 95
===========================
When installing the Audio Telephony software under Windows 95, please
ensure that you are running the installation Software from the diskettes
itself and do not run it from the hard drive.
The default factory setting of the modem port on the Telephony Board is
at Com Port 3 (3E8) and is using Interrupt 11. If these settings conflict
with your existing configurations in the system, please configure the
Modem Port to a conflict free setting using the Configuration Utility
(CONFIG.EXE) which can be located under the \UTILITY sub-directory of the
default installed \AT3100 directory.
Note : Changing of the board's configuration settings have to be carried
out under MS-DOS mode. Utility will not function under Windows 95
DOS Box.
You need to register this new Com Port setting to Windows 95 system
by simply double click on the <Add New Hardware> applet in the Control
Panel menu. Next, click at the <Next> button and Win95 will prompt "Do
you want Windows 95 to search for your new hardware..". Select "Yes"
and proceed the searching by clicking the <Next> button again. Upon
completion, Windows 95 will prompt you to restart system to take effect
of the new Com Port setting.
CD-ROM Driver
=============
The bundled CD-ROM device driver supports only the following drives:
Driver CD-ROM Model
------ ------------
SGIDECD.SYS - Aztech CDA268-03I/CDA268-03ISE/CDA468-01I/CDA668-01I/
CDA868-01I
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* AT3100 Sound Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.