README.TXT Driver File Contents (Mat33-e1.zip)

                          Additional Information

                      Multimedia AT3300 Version 1.04


   This file contains additional information and changes about the
   various software that was not available at printing time.


   Installation on Win3.1x Platform
   ================================
   
   For installing the audio drivers on Win3.1x, please run the ISA Configuration
   Utility (ICU) first. The ICU helps to determine a working configuration that
   does not conflict with other cards in the system. You can refer to the Easy 
   Start Manual for more details.
 
   On Windows 3.1x Operating System, choose 'Run' from the 'File' menu. Insert
   the Audio Installation Disk#1 into Drive A: (or Drive B:) and change the path to a:\setup (or 
   b:\setup). For more details, you can refer to the Easy Start Manual.


   Installation on Windows 95 Platform
   ===================================

   Start up Windows 95 Operating System. Windows 95 will then automatically 
   detects the PnP Sound Device and prompts a dialog box with the option 
   "Driver from disk provided by manufacturers" being highlighted. Please
   insert the Audio Installation Disk#1 into Drive A: (or Drive B:) and change
   the path to a:\ (or b:\) and click OK to install the drivers.
   Windows 95 will then automatically proceed to detect all the other logical
   devices. 

   Note: If you do not have Windows 95 Multimedia Applications installed
         previously, system will prompt you to complete the installation of
         the Multimedia Applications prior to the copying of the Audio Device 
         drivers. Just follow the on-screen instructions to complete the
         installation of Multimedia Application and PnP Sound Drivers.
         
   Next, please proceed to run 'A:\SETUP.EXE' from the PnP Audio Installation
   Disk #1 to install the application software. 

   You might encounter some resource conflicts after loading the PnP 
   devices (especially when there are non-Plug & Play adaptors installed in 
   your system). Please refer to Trouble-shooting section in Windows 95 for 
   further details.


   Upgrading from Win3.x to Win95 platform
   =======================================

   If you have set up your audio card on a Win3.x platform and want to upgrade
   to Windows 95, remember to remove the audio drivers by doing a deinstallation
   first. For more details, you can refer to the Appendix section in the User's
   Manual.


   MIC3D/MIC Option
   ================

   If you have enabled the Mic Monitoring in DOS mode and noticed that there
   is no sound from the speaker when you speak to the Mic, try adjusting the
   Mic volume by using the MIX or VOLSET utility.


   AT Commands
   ===========

   For Standard AT Command Set, please refer to the document (ATSET.DOC) in
   the installed directory.


   Installation on Windows 95 SR2 Platform
   =======================================

   This version of Windows 95 will prompt the user for the Installation Disk#1
   into the Floppy drive. After the installation disk has been inserted, click
   NEXT and follow through the on-screen instructions to complete the
   installation of Multimedia Application and PnP Sound Drivers.
   
   Next, proceed to run 'A:\SETUP.EXE' from the PnP Audio Installation Disk #1
   to install the application software. 


   Installation of Windows 95 with a Telephony card onboard
   ========================================================

   If the above situation is encountered, just type A:\SETUP.EXE from the PnP
   Installation Disk #1 and all the required drivers will be automatically
   installed. Note that in this particular case, the File Transfer application
   will not be installed. However, in that of the Windows 95 OSR2 platform,
   the File Transfer will be installed.

   
        ***********************************************************
        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                      MM AT3300 (Europe) Telephony Card  *
        *********************************************************** 



                         -------  The End  ---------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.46