Additional Information Multimedia AT3300 Version 1.04 This file contains additional information and changes about the various software that was not available at printing time. Manual Update ============= The current version of the audio telephony card DOES NOT support Simultaneous Voice/Data (SVD) compatibility. Refer to page 6 - Technical Specifications (General Features) of the AUDIO TELEPHONY 3300 Reference Guide. Modem AT Command Set ==================== The AT Command Instruction Set for the Modem hardware is now available in Microsoft Word format (ATSET.DOC) and it can be found in the user installed directory. Upgrade From Win 3.1 to Win 95 ============================== If you have previously installed AT3300 in Win 3.1 environment and now decided to upgrade your Win 3.1 to Win 95 via Win 95 Upgrade Kit, you must perform a de-installation of the AT3300 audio drivers (in Win 3.1 environment). The de-installation can be done with the Audio Setup application in the AT3300 Program Group. MIC3D /MIC Option ================= If you have enabled the Mic Monitoring in DOS mode and noticed that there is no sound from the speaker when you speak to the Mic, try adjusting the Mic volume by using the MIX or VOLSET utility. Installation on Windows 95 SR2 Platform ======================================= This version of Windows 95 will prompt the user for the Installation Disk#1 into the Floppy drive. After the installation disk has been inserted, click NEXT and follow through the on-screen instructions to complete the installation of Multimedia Application and PnP Sound Drivers. Next, proceed to run 'A:\SETUP.EXE' from the PnP Audio Installation Disk #1 to install the application software. *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * MM AT3300 (US) Sound Card * *********************************************************** ------- The End ---------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.