README.TXT Driver File Contents (EPLC8000.exe)

--------------------------------------------------------------------------------------------------------------------------
README file for EPSON EPL Series Printer Driver
for Microsoft(R) Windows(R) 3.1, Windows(R) 95, Windows(R) 98 and Windows NT(R) 3.51/4.0
--------------------------------------------------------------------------------------------------------------------------

Thank you for purchasing an Epson printer. This document contains notes regarding your new printer.

[Contents]
1. Introduction
2. Important legal information
3. Install notes
4. Notes regarding printing

--------------------------------------------------------------------------------------------------------------------------
1. Introduction
This document contains information that you should be aware of when printing with Windows. 

2. Important legal information
Software called the EPSON EPL Series Printer Driver (the "Software") is provided "AS IS."  NO IMPLIED WARRANTIES OF MERCHANTABILITY
AND/OR FITNESS FOR A PARTICULAR PURPOSE ARE GIVEN.

The Software may be copied and distributed without charge only to users of EPSON
brand printers. All files on the disk must be copied without modification,
including all proprietary marks and notices. All components of the Software must
be distributed together. The Software may not be distributed for profit.

Copyright (c) 1998 SEIKO EPSON CORPORATION


3. Install notes
Run setup.exe in disk1 on each Operating System.
make sure that,
*all other applications are closed, and all print jobs are finished before installing the printer driver.
*when asked by the install program whether you wish to "Keep existing driver" OR "Replace existing driver",
 always select the replace option.

4. Notes regarding printing

1) Setting Up Drivers From Within Applications 
Print setup is not available from within some applications. Setting up print conditions for the driver from 
these applications will have no effect on printing.
If using applications that do not support print setup,  print only after set the driver print conditions on the Control Panel.

2) Zoom Options Printing
The edges of the original may not be printed in the Zoom Options modes. 
Make sure that sufficient space is available for the left, right, top and bottom margins when printing in these modes.

3) Some applications may not produce the desired print results.
Changing the print mode with the printer driver may produce the desired results in such cases.
To change the print mode:
	1. Click [Start] on the task bar, select [Settings(S)], and then select [Printers(P)]. 
	2. Click the icon of the printer to be altered, and select [Properties(R)] from the [File(F)] menu.
	3. Click the [Basic Settings] tab and select [Advanced(N)]. Select the [More Settings(O)] button,
	 and click it to open the [Advanced Settings] dialog box.
	4. Select the desired mode from the [Printing Mode(P)] list in the [Advanced Settings] dialog box.

If you don't obtain the desired print results in the High Speed mode, select the High Quality mode or the CRT mode.

* Gradations of color may not be match the screen with some graphics-based applications. 
In such cases, changing from Automatic to other settings in the Color Adjustment in  [Advanced Settings] dialog box 
may produce the desired result.
To change the Color Adjustment, open the [Advanced Settings] dialog box as described above, and select the method from [Mode(M)].

* When using the various font modification functions in word processor applications select [Print TrueType fonts as bitmap(N)] 
on the [Optional Setting] tab in the printer driver.

* If you have problems with output from Adobe applications, turn Adobe Type Manager off, and print again.  

(4) Euro Symbol Printing
The printer driver supports Euro Symbol with the following internal printer fonts;
	Courier SWC
	Dutch 801 SWM	
	Swiss 721 SWM
	Dutch 801 SWC
	Zapf Humanist 601 SWC
	Ribbon 131 SWC
	Clarendon Condensed SWC
	Swiss 742 SWC
	Swiss 742 Condensed SWC
	Incised 901 SWC
	Original Garamond SWC
	Audrey Two SWC
	Flareserif 821 SWC
	Flareserif 821 Extra Bold SWC
	Letter Gothic SWC
If you have problems print in Euro Symbols, check the Font Substitution Table in the Font TAB of the printer driver and the printer's firmware version. 
You can print Euro Symbols without using internal printer fonts if you have screen fonts which support the Euro Symbol in your system. 
To do that, change "TrueType fonts with substitution" to "Print TrueType fonts as bitmap" in the Font TAB of the printer driver before you print.

--------------------------------------------------------------------------------------------------------------------------

Microsoft is registered trademark and Windows is registered trademark of Microsoft Corporation in the United States and other countries.
Product and Company names listed in this document are all registered trademarks of their respective Companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.03