#
| README file for GLoria-XL
|
| ELSA graphics driver disk for Windows NT 4.0 build 1381.
|
| Version: 5.30.05.231
|
| Copyright (c) 1993-97 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5
| Nanking East Road
| Taipei 105
| Taiwan, R. O. C.
|
| ELSA Japan Inc. Internet : http://www.elsa.com
| Mita Suzuki Building 3F
| 5-20-14 Shiba, Minato-ku
| Tokyo 108-0014
| Japan
|
| 02/27/98, CBuersch
Table of Contents:
1 Introduction
2 List of Files
3 Installation
4 Release Notes / Known Bugs
------------------------------------------------------------------------
1 Introduction
This file helps you with the installation of your ELSA graphics
adapter. It explains how to setup the ELSA WINNER driver and check
if it has been installed properly.
1.2 Further Information
For more information on configuring installed ELSA display drivers,
refer to the Windows help or the help files shipped
with the ELSA utilities.
------------------------------------------------------------------------
2 List of Files
NOTE Not all of the files listed below can be used by your graphic
adapters. Some utilities need specialized adapter capabilities
and hardware.
The directory with the ELSA graphics driver for Windows NT
contains the following files:
DISK1 Identifier for the first disk
DISK2 Identifier for the second disk
DISK3 Identifier for the third disk
ELSA.HLP ELSA help file
EGLMX.INF Script file for Microsoft setup program
LIESMICH.TXT German version of the file README.TXT
README.TXT This file
TXTSETUP.OEM Script file for text setup while booting
Graphics display drivers:
EGLMXM.SYS Miniport driver
EGLMXD.DLL Display driver
EMGLMXD.DLL Multi-display driver
EOGLL.DLL OpenGL driver
Utilities:
Subdirectory Glset:
GLSET.DLL GLoria Settings property page
GLSET.INF Script file for Microsoft setup program
GLSET.TEX Data file for GLoria Settings
GLSETENG.HLP English GLoria Settings help file
GLSETDEU.HLP German GLoria Settings help file
Subdirectory Winmsuit:
ELSA.HLP ELSA help file
ELSAENG.HLP ELSA help file english version
WINMPS.DLL Applikation extension
WINMSUIT.EXE WINMAN Suite for faster switching of the GLoria Settings
WINMSUIT.INF Script file for WINMAN Suite Setup
WSUIT_DE.DLL Applikation extension german language
------------------------------------------------------------------------
3 Installation
3.1 Installing the ELSA Display Driver
You can install the graphics driver using the Display Properties
sheet. Open the Display Property sheet and select the page
>>Settings<<, click on >>Display Type...<< to open the
dialog window of the same name and select >>Change...<< in the
Adapter Type frame. The >>Change Display<< dialog opens.
NOTE The entry >>Elsa WINNER 1000<< in this listbox will install
the general purpose (and less than optimal) S3 driver designed
by Microsoft. The entries in the Manufacturer's >>S3<< list can
be used but do not always work properly. General purpose
drivers are installed here as well!
Click the button >>Have Disk...<< to install the ELSA drivers.
Windows NT prompts you to enter the disk with the driver or browse
for the path. Select >>Browse...<< when installing from CD-ROM and
locate the file ELSA.INF for the driver suitable for your hardware.
When installing from floppy disk, insert the first driver disk.
Select the >>OK<< button.
A list box appears. Here, choose the entry matching your graphics
adapter and click >>OK<<. Confirm the >>Third-party Drivers<<
dialog with >>Yes<<.
The driver files and utilities are now copied and installed to
your hard disk. When installing from floppies, the >>Insert Disk<<
dialog prompts you when the disk has to be changed.
The >>Installing Driver<< window informs you that the driver has
been installed. Confirm this message and close all display
settings windows until you are asked to reboot your computer.
NOTE With Windows NT 4.0, graphic drivers cannot be loaded
dynamically. This is not an ELSA limitation.
To activate the ELSA driver the computer has to be restarted.
Please press >>Yes<< in the >>System Settings Change<< dialog.
When you've selected to restart, the system will reboot and
the initial installation is finished.
NOTE Windows NT 4.0 will now restart in a resolution of
640*480 pixel at 256 colors and 60Hz refresh, unless you have
updated your driver in which case the previous resolution is
taken over. Refer to your Windows NT Help on how to change the
display properties settings.
After Windows NT is restarted, the dialog >>Registry Editor<<
informs you that some information has been entered into the
registry. This was done to install the display property pages.
Simultaneously the Display Properties sheet opens with the
>>Settings<< page and a dialog >>Invalid Display Settings<<
which tells you that a new driver was installed and that you have
to select your preferred display resolution.
3.2 Installation of the ELSA GLoria Settings
The ELSA GLoria Settings can be easily installed from the Explorer by clicking
the right mouse button on the appropriate GLSET.INF file in the directory "ALPHA\GLSET"
in the source-path for the driver-installation and then selecting "Install...".
NOTE: For deinstallation of the GLoria Settings, choose "Add/Remove Programs"
in Control Panel.
3.3 Installation of the ELSA Winman Suite
The ELSA Winman Suite can be easily installed from the Explorer by clicking
the right mouse button on the appropriate WINMSUIT.INF file in the directory "ALPHA\WINMSUIT"
in the source-path for the driver-installation and then selecting "Install...".
After the installation the system has to be rebooted for the utility to appear in the
task bar. Alternatively, you can start the file WINMSUIT.EXE in your
"WINDOWS NT\ELSAUTIL" directory.
NOTE: For deinstallation of the Winman Suite, choose "Add/Remove Programs"
in Control Panel.
-----------------------------------------------------------------------------------------------
4 Release Notes / Known Bugs
4.1 Release Notes
First release
4.2 Known bugs
PRO/E Graphics Short Check:
Hidden lines may be visible
With 3D extensions deactivated it may happen that sketches are not visible.
Sketches may become black cubes while rotating/zooming/panning.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.