#
| README file for
|
| Disk for ELSA MicroLink 33.6MC under Windows 95/NT 4.0
|
| Copyright (c) 1994-97 ELSA GmbH, Aachen (Germany)
|
| Subsidary:
| ELSA GmbH ELSA Inc.
| Sonnenweg 11 2150 Trade Zone Blvd.
| D-52070 Aachen Suite 101
| Germany San Jose, CA 95131
| USA
|
| Phone : +49-241-606-0 Phone: +1-408-935-0350
| Support Fax: +49-241-606-6499 Phone: +1-800-272-ELSA
| BBS (modem): +49-241-606-9800 Fax : +1-408-935-0370
| BBS (ISDN) : +49-241-606-9820 BBS : +1-408-935-0380
| CIS : GO ELSA CIS : GO ELSA
| WWW : http://www.elsa.de WWW : http://www.elsa.com
|
| 06/26/97, mr
Table of Contents
1. Overview
2. Contents
3. Installation
4. Parallel Port Driver Installation
5. Notes
------------------------------------------------------------------------
1. Overview
This disk contains configuration programs and drivers.
------------------------------------------------------------------------
2. Contents
DRIVER Subdirectory including Windows 95 and NT 4.0 drivers
_INST32I EX_ File for Setup
_ISDEL EXE File for Setup
_SETUP DLL File for Setup
_SETUP LIB File for Setup
DATA Z File for Setup
DISK1 ID File for disk indication
GCHELPER EXE File for Setup
MDMELSAA INF INF file for MicroLink 33.6MC
SETUP EXE Executable Setup file
SETUP INS File for Setup
SETUP PKG File for Setup
UNINST EXE Uninstaller
LIESMICH TXT This file (german)
README TXT This file
------------------------------------------------------------------------
3. Installation
Please read the manual to get further information about the
standard installation.
------------------------------------------------------------------------
4. Parallel Port Driver Installation
It is imperative that you follow these instructions when installing
the parallel port driver:
1. Installation for Windows 95 Ver.4.00.950
a) If your MicroLink 33.6MC is not yet installed, insert the
PCMCIA modem card into its slot. When started, Windows 95
responds with the "New Hardware Found" window. Select the option
"Driver from disk provided by hardware manufacturer" and confirm
with "OK".
The window "Install from Disk" is displayed. Insert the ELSA
"Treiber Diskette für Windows 95" (Drivers Disk for Windows 95)
into its drive, use "Browse" to select the directory
A:\DRIVER\WIN95 and confirm twice with "OK".
In the following window "Copy files" confirm with OK. The file
ppm.vxd will be copied onto your system. The installation of the
parallel port driver is complete.
b) If your MicroLink 33.6MC is already installed, then the first
step is to remove it from your system configuration. Do this by
activating "Start" and then "Settings, Control Panel", select
"Modems", mark the "MicroLink 33.6MC" entry and select "Remove".
Then exit the Modems window.
Clicking on "Start", "Programs" and activate the Windows Explorer.
Select your hard drive, go to the directory WINDOWS\INF and use
the Search option ("Extras, Search, File") to find the INF file
containing the text "33.6MC". This file/these files must be
deleted.
Now follow the installation routine as described under a).
2. Installation for Windows 95 Ver.4.00.950B
a) If your MicroLink 33.6MC is not yet installed, insert the
PCMCIA modem card into its slot. When started, Windows 95
responds first with the "New Hardware Found" window and then
with the "Update Device Driver Wizard".
Insert the "Treiber Diskette für Windows 95" (Drivers Disk for
Windows 95) disk into its drive and confirm with "Next". The
"Update Device Driver Wizard" appears again with the message
"This wizard will complete the installation of: Standard PCMCIA
Card Modem". Confirm with "Next".
The "Update Device Driver Wizard" is displayed with the message
"Windows found the following updated driver for this device:
MicroLink 33.6MC". Select "Other Locations" to open the window
"Select other location" and click on "Browse".
In the "Browse for Folder" window, select the directory
A:\DRIVER\WIN95 and confirm with "OK". In the following window
confirm with "OK" again and then in the following "Update
Device Driver Wizard" window, select "Next".
In the "Copy files" window, click on "OK". The file ppm.vxd will
be copied onto your system. The installation of the
parallel port driver is complete.
b) If your MicroLink 33.6MC is already installed, then the first
step is to remove it from your system configuration. Do this by
activating "Start" and then "Settings, Control Panel", select
"Modems", mark the "MicroLink 33.6MC" entry and select "Remove".
Then exit the Modems window.
Clicking on "Start", "Programs" and activate the Windows Explorer.
Select your hard drive, go to the directory WINDOWS\INF and use
the Search option ("Extras, Search, File") to find the INF file
containing the text "33.6MC". This file/these files must be
deleted.
Now follow the installation routine as described under a).
------------------------------------------------------------------------
5. Notes
Please refer to README.TXT in the respective subdirectory for
information about the respective application.
------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.