README.TXT For REALmagic (TM) Maxima Driver 2/23/98
Version 4.40 - Build 69
========================
CONTENTS
========
I SOFTWARE INSTALLATION
II BORDER ADJUSTMENT AND CALIBRATION
III CHANGING A RESOURCE
IV MODIFICATIONS MADE BY INSTALLATION
I - SOFTWARE INSTALLATION
=====================
NOTE: i - If your system has a previous 32-bit REALmagic driver
installed (4.0b1 or b2), you can install the new driver
by using "Change Driver" in the Device Manager.
Steps are: Open the "System" Control Panel.
Then, click the "Device Manager" tab,
double-click on "Sound, video, and game
controllers" and select "REALmagic..."
Click the "Driver" tab and click the
"Change Driver" button. Select "Have
disk ..." and follow instructions.
ii - If your system has a previous 16-bit driver installed
(the last 16 bit driver release is 2.30 for Maxima),
run DELOLDRM.EXE (included on this diskette), remove
the REALmagic decoder from the Device Manager, install
as per next section. The Device Manager can be found
in the second tab of the "System" Control Panel.
After the hardware installation do the following :
1. Boot your system.
2. In the Control Panel group, select "Add New Hardware".
3. When you're prompted to "Search for New hardware", select No.
Click Next.
4. Choose "Sound, Video, Game controllers" from the list of
devices. Click Next.
5. Click the "Have Disk" button. Make sure the REALmagic driver
disk is in the floppy drive.
6. Enter "A:" for the drive letter and click OK. (Where A:\ is
the floppy drive.)
7. The "Select Device" dialog box should appear. Select the "Sigma
Designs REALmagic Maxima". Click OK.
8. A window displaying the resources used by the REALmagic Maxima
will appear. Choose Next to continue.
9. Click Finish to complete the installation, then restart the
computer.
10. Run A:\SETUP from the second diskette (application).
II - BORDER ADJUSTMENT AND COLOR CALIBRATION
=======================================
1 - After rebooting, start "Border Adjust" from the REALmagic
group.
2 - Use the arrow keys or click with the mouse the proper
buttons to align the black rectangle on top of the
magenta rectangle, so that it covers the black borders
of the magenta window.
3 - To change the width of the black to match the width of the
magenta window, press the +/- keys or click the proper
buttons to adjust the width. Click OK.
4 - Click on "Auto Calibration" for the color calibration.
5 - The "Advance" button contains more detailed color calibration,
chroma key color adjustment and border adjustment options.
6 - Adjust the volume and balance of the MPEG audio.
NOTE 1: You must set the Border Adjustment and Color Calibration
settings to finalize the installation. You need to do this
once for each display setting used (resolution, number of
colors, and refresh rate) under Windows.
NOTE 2: You can call the "Border Adjust & Calibration" program from
the Media Player (option Device - Properties) and from
the CD Station (click on the Options button and click on
the Settings tab).
III - CHANGING A RESOURCE (Advanced Users Only)
========================================
If you wish to change a resource (I/O address or/and IRQ number)
assigned by the Plug N Play feature, do the following:
1- Open the "System" Control Panel.
2- Choose Device Manager and double-click on "Sound, video, and game
controllers".
3- Double-click on "REALmagic ..."
4- Select the tab labeled "Resources".
5- Double-click on the required resource. Click "Change Settings".
6- Modify the settings to the required value. Make sure there is
NO conflict specified in the Conflict Information box. Click OK.
7- Reboot.
IV - Modifications Made to Your System by Installation
=================================================
Installation of the REALmagic MPEG accelerator cards will:
1 - Add the following files in the \WIN95\SYSTEM directory:
rmmax.vxd
rmpnpmax.vxd
amfilter.dll
mpegapi.dll
impeg32.dll
mcifmp32.dll
mcifmp16.drv
stub32.dll
stub32.exe
8bits.dib
16bits.dib
24bits.dib
2 - Add the REALmagic card in the SOUND, VIDEO AND GAME
CONTROLLERS section of the Device Manager.
3 - Add these registry keys in "HKEY_LOCAL_MACHINE\SOFTWARE" :
\Sigma Designs
\Classes\Filter{65006770-D9CF-11CF-A036-00001B4EAD07}
\CLSID\{65006770-D9CF-11F-A036-00001B4EAD07}
4 - Add these entries in the system.ini :
[Drivers32]
MCIFMP = MCIFMP32.DLL
REELDRV = IMPEG32.DLL
[MCI]
MPEGVIDEO = MCIFMP16.DRV
REELMAGIC = MCIFMP16.DRV
5 - Add these entries in the win.ini :
[MCI EXTENSIONS]
mpg=REELMAGIC
dat=REELMAGIC
rmg=REELMAGIC
vbs=REELMAGIC
abs=REELMAGIC
6 - For Windows 95 release A, a REALmagic MPEG adapter-related
OEM INF file is in the Win95\Inf directory.
For Windows 95 release B, OSR2, the REALmagic MPEG adapter-
related INF file is in the Win95\Inf\Other directory.
================================================================
( END OF FILE )
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.