;*****************************************************
; OEMSETUP.INF for CentreCOM LA-PCM-T V3
; Ver 1.01 for AT with ENABLER
; Allied Telesis K.K. 1999.05.14
;*****************************************************
;
; 1999.05.14 Ver1.0 pl0 1st Release
; 1999.07.30 Ver1.0 pl1 modified
;
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
"Jazz-Internal Bus"
[Options]
lapcmv3
[IRQ_Level]
IRQ_3 = "3", 3
IRQ_4 = "4", 4
IRQ_5 = "5", 5
IRQ_7 = "7", 7
IRQ_9 = "9", 9
IRQ_A = "A", 10
IRQ_B = "B", 11
IRQ_F = "F", 15
[MappedAddress]
Mapped_D0000 = "D0000", 851968
Mapped_D2000 = "D2000", 860160
Mapped_D4000 = "D4000", 868352
Mapped_D6000 = "D6000", 876544
[IOAddrChoices]
IO_200 = "200", 512
IO_220 = "220", 544
IO_240 = "240", 576
IO_260 = "260", 608
IO_280 = "280", 640
IO_2A0 = "2A0", 672
IO_2C0 = "2C0", 704
IO_2E0 = "2E0", 736
IO_300 = "300", 768
IO_320 = "320", 800
IO_340 = "340", 832
IO_360 = "360", 864
IO_380 = "380", 896
IO_3A0 = "3A0", 928
IO_3C0 = "3C0", 960
IO_3E0 = "3E0", 992
[SlotChoices]
SLOT_0 = "AUTO", 0
SLOT_1 = "1" , 1
SLOT_2 = "2" , 2
[FileConstants]
ParamInf = "NCPARAM.INF"
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
ReOptionDLLDir = "%SystemRoot%\System32"
IOBaseAddressHexList = ^(IOAddrChoices, 1)
IOBaseAddressDecList = ^(IOAddrChoices, 2)
IRQ_HexList = ^(IRQ_Level, 1)
IRQ_List = ^(IRQ_Level,2)
Mapped_HexList = ^(MappedAddress, 1)
MappedList = ^(MappedAddress,2)
Base_HexList = ^(BaseAddress, 1)
BaseList = ^(BaseAddress,2)
Slot_HexList = ^(SlotChoices, 1)
SlotList = ^(SlotChoices,2)
Manufacturer = "Microsoft"
ProductMajorVersion = "3"
ProductMinorVersion = "51"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "lapcmv3"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\lapcmv3.sys"
NetRuleSoftwareType = "lapcmv3Sys ndisDriver lapcmv3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """lapcmv3Sys"" yes no container"
NetRuleSoftwareClass = {"lapcmv3Driver basic"}
NetRuleSoftwareBindable = {"lapcmv3Driver lapcmv3Adapter non exclusive 100"}
ProductHardwareName = "lapcmv3"
NetRuleHardwareType = "lapcmv3 lapcmv3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"lapcmv3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)$(ProductHardwareName)"\Parameters"
PcmciaDB = $(!NTN_ServiceBase)"\Pcmcia\DataBase\Allied Telesis K.K."
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
PcmciaKey = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMSETUP.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMSETUP.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set ActivateDetection = FALSE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the lapcmv3 driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = FALSE
endif
Debug-Output "OEMSETUP.INF: =================================================="
Debug-Output "OEMSETUP.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMSETUP.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "OEMSETUP.INF: Option is: "$(Option)
Debug-Output "OEMSETUP.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "OEMSETUP.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "OEMSETUP.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "OEMSETUP.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "OEMSETUP.INF: =================================================="
Set DetectedCard = FALSE
Ifstr(i) $(ActivateDetection) != TRUE
Goto skipdetection
Endif
Set TypeList = {{IRQ,IRQ_List,IRQLevel},+
{MAPPED, MappedList, MappedValue},+
{SLOT, SlotList, SlotValue},+
{IOADDR, IOBaseAddressDecList, IOBaseValue}}
Debug-Output "OEMSETUP.INF: Calling Param_BuildTypeLists"
Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
Set Status = $($R0)
ifstr(i) $(Status) != STATUS_SUCCESSFUL
Goto fataldetect
Endif
Debug-Output "OEMSETUP.INF: Calling Param_SetDefaults"
Ifstr(i) $(!STF_NCDETECT) == YES
Ifstr(i) $(!STF_NCOPTION) == $(Option)
Set DetectedCard = TRUE
Debug-Output "OEMSETUP.INF: Setting DetectedCard to TRUE"
Endif
Endif
skipdetection =+
set IRQLevel = *($(IRQ_HexList),2)
set IOBaseAddress = *($(IOBaseAddressHexList),1)
set Mapped = *($(Mapped_HexList),3)
set Slot = *($(Slot_HexList),1)
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
Ifstr(i) $(DetectedCard) != TRUE
Goto adaptersetup
Endif
StartWait
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
Set DetectedParams = $($R1)
Debug-Output "OEMSETUP.INF: Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE )
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "IOBaseAddress"
set IOBaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MappedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
set MappedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "PCCARDAttributeMemorySize"
set MappedSize = $(ValueData)
else-ifstr(i) $(ValueName) == "PCICBase"
set BaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "SlotNumber"
set SlotValue = $(ValueData)
endif
EndForListDo
adaptersetup =+
Shell "" DebugConfiguration "before displaying dialog"
set from = adapteroptions
set IRQLevel = *($(IRQ_HexList), ~($(IRQ_List), $(IRQValue)))
set Mapped = *($(Mapped_HexList), ~($(MappedList), $(MappedValue)))
set Slot = *($(Slot_HexList), ~($(SlotList), $(SlotValue)))
set-dectohex Base = $(BaseValue)
set IOBaseAddress = *($(IOBaseAddressHexList), ~($(IOBaseAddressDecList),+
$(IOBaseValue)))
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "OEMSETUP.INF: parameter confidence too low to bypass configuration"
Goto adapteroptions
Endif
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto adapterverify
Endif
Endif
goto adapteroptions
adapteroptions = +
Ifstr(i) $(StartLabel) == installadapter
;;
;; Ifstr(i) $(!STF_SRCDIR_OVERRIDE) != ""
LoadLibrary "?" $(SrcDir)"\lapcmv3.dll" LibHandle
;; else
;; LoadLibrary "?" "lapcmv3.dll" LibHandle
;; endif
else
LoadLibrary "?" "lapcmv3.dll" LibHandle
endif
LibraryProcedure Result $(LibHandle) "ReOption" $(IOBaseAddress) $(IRQLevel) $(Mapped) $(Base) $(Slot)
set IOBaseAddress = $(Result)
LibraryProcedure Result $(LibHandle) "ReOptionInt" $(IOBaseAddress) $(IRQLevel) $(Mapped) $(Base) $(Slot)
set IRQLevel = $(Result)
; LibraryProcedure Result $(LibHandle) "ReOptionMapped" $(IOBaseAddress) $(IRQLevel) $(Mapped) $(Base) $(Slot)
; set Mapped = $(Result)
LibraryProcedure Result $(LibHandle) "ReOptionBase" $(IOBaseAddress) $(IRQLevel) $(Mapped) $(Base) $(Slot)
set-hextodec Base = $(Result)
LibraryProcedure Result $(LibHandle) "ReOptionSlot" $(IOBaseAddress) $(IRQLevel) $(Mapped) $(Base) $(Slot)
set Slot = $(Result)
FreeLibrary $(LibHandle)
;
; 98/06/29 modified by H.Wada
;
;; set IOBaseValue = *($(IOBaseAddressDecList), ~($(IOBaseAddressHexList),$(IOBaseAddress)))
;; fixed user cancel
ifstr(i) $(IOBaseAddress) == "200"
set IOBaseValue = "512"
else-ifstr(i) $(IOBaseAddress) == "220"
set IOBaseValue = "544"
else-ifstr(i) $(IOBaseAddress) == "240"
set IOBaseValue = "576"
else-ifstr(i) $(IOBaseAddress) == "260"
set IOBaseValue = "608"
else-ifstr(i) $(IOBaseAddress) == "280"
set IOBaseValue = "640"
else-ifstr(i) $(IOBaseAddress) == "2A0"
set IOBaseValue = "672"
else-ifstr(i) $(IOBaseAddress) == "2C0"
set IOBaseValue = "704"
else-ifstr(i) $(IOBaseAddress) == "2E0"
set IOBaseValue = "736"
else-ifstr(i) $(IOBaseAddress) == "300"
set IOBaseValue = "768"
else-ifstr(i) $(IOBaseAddress) == "320"
set IOBaseValue = "800"
else-ifstr(i) $(IOBaseAddress) == "340"
set IOBaseValue = "832"
else-ifstr(i) $(IOBaseAddress) == "360"
set IOBaseValue = "864"
else-ifstr(i) $(IOBaseAddress) == "380"
set IOBaseValue = "896"
else-ifstr(i) $(IOBaseAddress) == "3A0"
set IOBaseValue = "928"
else-ifstr(i) $(IOBaseAddress) == "3C0"
set IOBaseValue = "960"
else-ifstr(i) $(IOBaseAddress) == "3E0"
set IOBaseValue = "992"
else
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set IRQValue = *($(IRQ_List), ~($(IRQ_HexList), $(IRQLevel)))
set MappedValue = *($(MappedList), ~($(Mapped_HexList), $(Mapped)))
; set BaseValue = *($(BaseList), ~($(Base_HexList), $(Base)))
set BaseValue = $(Base)
set SlotValue = *($(SlotList), ~($(Slot_HexList), $(Slot)))
set BusInterfaceType = 1
set BusNumber = *($(!STF_NCDETINFO),6)
adapterverify =+
Ifstr(i) $(DetectedCard) != TRUE
Goto skipoptions
Endif
Debug-Output "OEMSETUP.INF: Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "OEMSETUP.INF: Param_VerifyCard succeeded"
Goto skipoptions
Endif
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
skipoptions = +
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
Debug-Output $(RegistryErrorIndex)
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
EndForListDo
set CardMediaType = 1
; set Mapped = 851968
set MappedSize = 4096
set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(CardMediaType)},+
;;;;;;;;;;;;;
{ MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MappedValue) },+
{ PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MappedValue) },+
{ PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(MappedSize) },+
;{ IOLength,$(NoTitle),$(!REG_VT_DWORD),31 },+
{ PCMCIA,$(NoTitle),$(!REG_VT_DWORD),1 },+
{ PCICBase,$(NoTitle),$(!REG_VT_DWORD),$(BaseValue) },+
{ SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotValue)},+
;;;;;;;;;;;;;
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyParameters)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
;;;;;;;;;; For CentreCOM LA-PCM-T V3 Register ;;;;;;;;;;;;;;;;;;;;;;;;;;;
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDB) $(MAXIMUM_ALLOWED) PcmciaKey
Ifstr $(PcmciaKey) != $(KeyNull)
CloseRegKey $(PcmciaKey)
goto successful
else
CreateRegKey $(!REG_H_LOCAL) +
{$(PcmciaDB),0,GenericClass} +
"" $(!REG_KEY_SET_VALUE) "" PcmciaHandle
CreateRegKey $(!REG_H_LOCAL) +
; 99.07.30 modified by H.Wada
; {$(PcmciaDB)"\CentreCOM LA-PCM V3",0,GenericClass} +
{$(PcmciaDB)"\LA-PCM V3",0,GenericClass} +
"" $(!REG_KEY_SET_VALUE) "" PcmciaHandle2
SetRegValue $(PcmciaHandle2) +
{"AttributeMemorySize",$(NoTitle),$(!REG_VT_DWORD), 4096}
SetRegValue $(PcmciaHandle2) +
{"Driver",$(NoTitle),$(!REG_VT_SZ), "lapcmv3"}
SetRegValue $(PcmciaHandle2) +
{"DeviceType",$(NoTitle),$(!REG_VT_SZ), "NET"}
CloseRegKey $(PcmciaHandle2)
CloseRegKey $(PcmciaHandle)
endif
;;;;;;;;;;
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
;;*** cheah 26/2/97 - remove Ethernet LAN Card from PCMCIA database
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDB) $(MAXIMUM_ALLOWED) PcmciaKey
Ifstr $(PcmciaKey) != $(KeyNull)
DeleteRegTree $(!REG_H_LOCAL) $(PcmciaDB)
; 99.07.30 modified by H.Wada
; DeleteRegTree $(!REG_H_LOCAL) $(PcmciaDB)"\CentreCOM LA-PCM V3"
DeleteRegTree $(!REG_H_LOCAL) $(PcmciaDB)"\LA-PCM V3"
endif
CloseRegKey $(PcmciaKey)
;;*** cheah 26/2/97
goto end
UpgradeSoftware = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = *($(FilenameList), $(ListSize))
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList ExeFiles-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList ExeFiles-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Windows NT Setup CD-ROM Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=35148, RENAME=$(!UG_Filename)
[Files-lapcmv3]
1,lapcmv3.sys , SIZE=21504
[ExeFiles-lapcmv3]
1, lapcmv3.dll, SIZE=47104
1, lapcmv3.hlp, SIZE=6513
[LanguagesSupported]
ENG
[OptionsTextENG]
lapcmv3 = "CentreCOM LA-PCM V3 Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "CentreCOM LA-PCM V3 Adapter Setup"
ProductSoftwareDescription = "CentreCOM LA-PCM V3 Adapter Driver"
ProductHardwareDescription = "CentreCOM LA-PCM V3 Adapter"
ProductSoftwareTitle = "CentreCOM LA-PCM V3 Adapter Driver"
ProductHardwareTitle = "CentreCOM LA-PCM V3 Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)
Combo1List = $(IRQ_HexList)
Combo1Out = $(IRQLevel)
Combo2List = $(IOBaseAddressHexList)
Combo2Out = $(IOBaseAddress)
Combo3List = $(Mapped_HexList)
Combo3Out = $(Mapped)
Combo4List = $(Slot_HexList)
Combo4Out = $(Slot)
;ComboListItemsIn = { Combo1List, Combo2list, Combo3List, Combo4List }
;ComboListItemsOut = { Combo1Out, Combo2Out, Combo3Out, Combo4Out }
ComboListItemsIn = { Combo1List, Combo2listt, Combo4List }
ComboListItemsOut = { Combo1Out, Combo2Out, Combo4Out }
EditTextIn = $(PCICBaseStr)
EditTextLim =256
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADTK_INS)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.