Driver Installation Guide for Windows NT 4.0
==================================================
Introduction
============
This document describes the procedure to install NDIS 4.0 driver on
Windows NT 4.0 for PRISM2 IEEE 802.11 PCI Adapter.
Location of Driver: \LM-WA100\WINNT40\RTL8139.SYS
Installation Procedure
======================
Before starting with the installation process, make sure that your
LAN adapter is properly installed and configured.
1. Open "Control Panel" -> "Networks", and choose the "Add Adapter"
button. The Add Noetwork Adapter dialog box appears. Select
" <other> Requires disk from manufacturer" in the list of Network
Adapters, and then press <Enter>.
2. Insert the driver CD into your CD-ROM drive, and specify the path
of the driver in the CD (i.e.E:\LM-WA100\WINNT40) if necessary.
3. Select "PRISM2 IEEE 802.11 PCI Adapter" , and start to copy the
driver files to your system.
4. After all the driver files have been copied to your system , then
a property dialog box appears in the screen. You can enable the
special properties if you want to.
5. When the driver installation is completed, restart your PC.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.