Inbox_Driver_Dhcp_Binds_Failed.txt Driver File Contents (driver_lan_realtek_26397A.exe)

================ All PCI/PCIe 8169/8168/8101E 10/100/1000 NETWORK ADAPTER =============

TCP/IP protocol not works issue on Realtek 8169/8168/8101E inbox driver

Q. Realtek inbox driver for Windows Vista RTM has software compatibility issue when TCP/IP protcol driver
   tries to bind the LAN miniport driver.
   If not cable connected to the network card first, the DHCP client could not bind to TCP/IP protocol stack
   after system boot.
   'ipconfig /all' does not show the adapter, too.  Device manager could show the adapter.

A. How to ensure that DHCP client always binds the TCP/IP protocol
   
   1. Connect the network cable to adapter first 
   2. Power on the machine and system boots
   3. The TCP/IP protocol could successfully bind to the LAN driver now and the network works.
   4. You can use 'ipconfig /all' to check the IP address.




Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.02