Jan. 1996
Pocket Lan Ethernet Card
NDIS Driver Installation for SUN PC-NFS V5.0
============================================
[Method 1 -- NDIS Driver]
=========================
When using PC-NFS concurrently with LAN Manager, select the "NDIS" option
from the PC-NFS installation screen. This option works with the NDIS driver
included in the provided driver diskette. Copy the files listed below into the
\NFS directory of your hard disk. These files will be used in the installation.
File Description
------------ ----------------------------------------------------------------
NFS-NDIS.SYS PC-NFS driver program
PEEPP.DOS NDIS driver program
PROTMAN.SYS MS PROTOCOL MANAGER
NETBIND.EXE MS LAN MANAGER Netbind
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 C:\LANMAN\NETBIND
FILES=40 SET TEMP=C:\DOS
STACKS=0,0 SET NFSDRIVE=C
LASTDRIVE=G SET NFSPATH=C:\NFS
SHELL=C:\DOS\COMMAND.COM C:\DOS /P SET TN_DIR=C:\NFS\TELNET
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\PRT *
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\NET INIT
DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
DEVICE=C:\LANMAN\NFS-NDIS.SYS
DEVICE=C:\LANMAN\PEEPP.DOS
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[PROTOCOL MANAGER]
DriverName = PROTMAN$
[PEEPP]
DRIVERNAME = PEEPP$
[NFS-NDIS]
DriverName = NFSLINK$
Bindings = PEEPP
To use the NDIS driver, the user needs to obtain a PC-NFS 5.0 QUIKNDIS diskette.
[Method 2 -- Packet Driver]
===========================
When using PC-NFS independently, select the "OTHER" option
from the PC-NFS installation screen. This option works with the PACKET driver
included in the provided driver diskette. Copy the files listed below into the
\NFS directory of your hard disk. These files will be used in the installation.
File Description
------------ ------------------------------------------
PDNFS.SYS PC-NFS driver program
PEEPP.SYS Packet driver program
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P C:\NFS\PRT *
DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\NET INIT
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\PEEPP.SYS
DEVICE=C:\NFS\PDNFS.SYS
[Method 3 -- ODI Driver]
========================
When using PC-NFS concurrently with NetWare 3.1x/4.0, select the "ODI" option
from the PC-NFS installation screen. This option works with the ODI driver included
in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard
disk. These files will be used in the installation.
File Description
------------ ----------------------------------------------------------------
NFSODI.SYS PC-NFS driver program
PEEPP.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS RAM @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;C:\DOS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
DEVICE=C:\NFS\PCNFS.SYS /l40 PEEPP
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver PEEPP
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use the Ethernet_802.3 frame type,
add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file
and add an entry in your NET.CFG file defining the two frames types.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.