TC3299 Linux driver install
Note: this driver had been test for linux 2.2.12-20
1. download pcmcia-cs-3.1.16.tar.gz or the last version from ftp://sourceforge.org/pcmcia/
read PCMCIA-HOWTO file & install it
# mcopy pcmcia-cs-3.1.16.tar.gz /usr/src/linux
# tar zxvf pcmcia-cs-3.1.16.tar.gz
# cd /usr/src/linux/pcmcia-cs-3.1.16
# make config
# make all; make install
2. Modify the file "network.opts" in /etc/pcmcia as follow example.
case "$ADDRESS" in
*,0,*,*)
# 0 ,definitions for network card in socket 0
# if 1 ,definition for network card in socket 1
IF_PORT= 10baseT" <----------------------|
BOOTP="n" |
IPADDR="101.23.33.4" <-----------------|
NETMASK="255.255.255.0" <------------|
NETWORK="101.23.33.0" <------------|--------------------- modify as your need
BROADCAST="101.23.33.255" <-------|
GATEWAY="101.23.33.1" <-------------|
DOMAIN="domain.org" <----------------|
DNS_1="dns.domain.org" <---------------|
;;
esac
3. Reboot
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.