CLIENT32.TXT Driver File Contents (unex_pcmcia.zip)

*****************************************************************************
*                                                                           *
*                   32-BIT IO MODE PCI ETHERNET ADAPTER                     *
*                                                                           *
*               Netware Client32 Driver Installation Overview               *
*                                                                           *
*****************************************************************************

Contents of the file:
=====================
        A) Driver Installation for Netware Server 4.11
        B) Driver Installation for DOS32
        C) Driver Installation for Microsoft Windows 3.x
        D) Driver Installation for Microsoft Windows 95 OSR2
        E) Driver Custom Keywords


A) Driver Installation for Netware Server 4.11
   ===========================================
   1. On the server console, execute the INSTALL.NLM program:

               LOAD INSTALL <Enter>

   2. Choose "Driver Options  (load/unload ...)" and press <Enter>.

   3. Choose "Configure network drivers" and press <Enter>.

   4. Choose "Select an additional driver" and press <Enter>.

   5. Press the <Ins> key to install the driver which is not on the list.

   6. Press <F3> to specify a different path (A:\LANDRV32) and press <Enter>.

   7. The PCISRV.LAN should appear on the selection list. Press <Enter> to
      choose it.

   8. You can "Select/Modify driver parameters and protocols", and then "Save
      parameters and load driver".

   9. You can add the LOAD and BIND command lines to the AUTOEXEC.NCF file so
      that the LAN driver will be loaded automatically while the server
      is starting up.


B) Driver Installation for DOS32
   =============================
   1. If you have completed installed the Netware Client 32 for DOS, all you
      have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT
      below the installation instructions.

   2. In DOS environment, run "INSTALL" from Netware 4.11 CD root directory.
      Follow the installation steps of Novell NetWare Client 32.

      - When "Select the type of installation desired" window appears, select
        "Client Installation".

      - When "Select Client to be installed" window appears, select "NetWare
        Client 32 for DOS and Windows 3.1x"

      - When the product manual appears, mark the "Netware Client 32 for DOS"
        item, then press <Enter>.

   3. In "32-Bit Network Board Drivers" window, select "USER SPECIFIED 32 BIT
      DRIVER".

   4. Insert PCI Ethernet Driver Diskette into your floppy diskette
      drive, then specify the driver path like A:\LANDRV32.

   5. Select "32-Bit IO Mode PCI Ethernet Adapter Driver", then press <Enter>.

   6. Refer to Content E) and set the correct driver parameters to comply
      with your network environment, then press <F10> to continue.

   7. Following instructions to complete the Client32 for DOS software
      installation.

   8. Reboot your machine.

   Sample STARTNET.BAT for DOS32.
   ==============================
      SET NWLANGUAGE=ENGLISH
      C:\NOVELL\CLIENT32\NIOS.EXE
      LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
      LOAD C:\NOVELL\CLIENT32\CMSM.NLM
      LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
      LOAD C:\NOVELL\CLIENT32\PCISRV.LAN FRAME=ETHERNET_802.2
      LOAD C:\NOVELL\CLIENT32\PCISRV.LAN FRAME=ETHERNET_802.3
      LOAD C:\NOVELL\CLIENT32\PCISRV.LAN FRAME=ETHERNET_II
      LOAD C:\NOVELL\CLIENT32\PCISRV.LAN FRAME=ETHERNET_SNAP
      LOAD C:\NOVELL\CLIENT32\IPX.NLM
      LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM


C) Driver Installation for Microsoft Windows 3.x
   =============================================
   Please refer to Content B), in step 2, mark "NetWare Client 32 for DOS"
   and "NetWare Client 32 for Windows", then following step 3..8 to complete
   the installation.


D) Driver Installation for Microsoft Windows 95 OSR2
   =================================================
   If you have installed the Microsoft Client in your Windows 95 system,
   you should remove the adapter object and NDIS3 driver of the 32-Bit PCI
   Eternet Adapter from the Windows 95 system and delete
   C:\WINDOWS\INF\NETRTP.INF file.

   Install Novell NetWare Client 32 for Windows 95 OSR2
   ----------------------------------------------------
   1. Plug 32-Bit PCI Ethernet adapter into one of the PCI slots.

   2. Turn the PC power ON and then boot from Windows 95.

   3. Windows 95 will prompt "PCI Ethernet Controller" in "New Hardware Found"
      dialog box. Please click on "Cancel" and do not install driver now.

   4. In WIN95 environment, run "SETUP.EXE" in the Netware 4.11 CD named
      \PRODUCTS\WIN95\IBM_ENU directory. Follow the installation steps of
      Novell NetWare Client 32.

   5. In "Select Device" window, please select "[detected net drivers]" and
      click on "OK" button to follow the installation steps of Client 32.
      (Please do not click "Have Disk..." to install adapter driver now.)

   6. After following the instructions to complete the Client32 for WIN95
      software installation, reboot your machine.

   Install Driver After Novell NetWare Client 32 for Windows 95 is Installed
   -------------------------------------------------------------------------
   1. Make sure Novell NetWare Client 32 is installed OK and then install
      32-Bit PCI Ethernet Adapter Driver again. When the PC is powered on,
      Windows 95 will prompt "PCI Ethernet Controller" in "New Hardware Found"
      dialog box. (If your adapter is not detected by Windows 95, refer to
      TroubleShooting below.)

   2. Remove the PCI adapter Driver Diskette in your floppy drive.
      Click on "Next" button and do not let WIN95 search adapter driver.

   3. Insert the PCI adapter Driver Diskette in your floppy drive.
      Click "Other Locations" and type "A:\LANDRV32", then click "OK" button.
      The message "32-Bit IO Mode PCI Ethernet Adapter for Novell Netware
      Client 32" will appear.

   4. After the "Finish" button is clicked, Windows starts to copy files from
      Windows 95 CD-ROM to your hard disk. When the "Copying Files" dialogue
      shows up to request the directory for the "PCISRV.LAN" file, type
      "A:\LANDRV32" and click on the "OK" button.

   5. Follow the screen's prompt to insert "NetWare Client 32 for Windows 95"
      disk and click the OK button in the "Insert Disk" dialog box.

   6. Otherwise enter the full pathname (ex. D:\PRODUCTS\WIN95\IBM_ENU) of
      the "NetWare Client 32 for Windows95" installation files in the
      "Copying Files....." dialog box, then click the OK button.

   7. Follow the screen's prompt to insert the "Windows 95 CD-ROM" and click
      the OK button in the "Insert Disk" dialog box.

   8. Otherwise enter the full pathname of the "Windows 95 CD-ROM" installation
      files in the "Copying Files..." dialog box, then click the OK button.

   9. Windows 95 will copy the driver (PCISRV.LAN) from A:\LANDRV32 to
      C:\NOVELL\CLIENT32 directory and the ODIRTL.INF file from A:\LANDRV32
      to C:\WINDOWS\INF directory.

  10. Remove the PCI adapter Driver Diskette from your floppy drive.

  11. Restart your computer to initialize the network function.

  NOTE:
    - C:\NOVELL is the directory where your Novell Client 32 files are located.
    - C:\WINDOWS is the directory where your Windows 95 O.S. is located.
    - Do not remove "Novell ODINSUP" from the Network control panel. Removing
      Novell ODINSUP also removes NetWare Client 32 for Windows 95 if there
      is only one adapter in use.

  TroubleShooting in Windows 95
  -----------------------------
    If your adapter is not detected by Windows 95 "New Hardware Found", your
    adapter may be already REGISTERED. Therefore, you have to remove the
    REGISTERED before you install adapter driver again.

    Method:
    1. Click "Network" icon in the "Control Panel" box to make sure your
       adapter driver not installed. If your adapter driver was installed,
       remove it.
    2. Select "Start" button (left-down corner) and select "Run" item.
       Type REGEDIT, the registry edidor utility , then click "OK" button to
       execute it.
    3. In the Registry Editor dialogue, double-click "HKEY_LOCAL_MACHINE" item,
       double-click "Enum", then double-click PCI item. Select the
       "VEN_10EC&DEV_8029", then delete it. Close Register Editor dialogue.
    4. Reboot Windows 95 again to carefully follow the installtion procedures
       above again.


E) Driver Custom Keywords
   ======================
   SLOT:
     If you want to install mutiple LAN adapters in a server, you have to
     use the keyword, SLOT, to let driver locate the right adapter.
     For example:

        LOAD PCISRV SLOT=1 FRAME=Ethernet_802.2 NAME=Lan_1
        BIND IPX TO Lan_1 NET=2001
        LOAD PCISRV SLOT=2 FRAME=Ethernet_802.2 NAME=Lan_2
        BIND IPX TO Lan_2 NET=2002

----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.84