D-Link USB Radio Quick Installation Guide
Software Installation Steps
Note : The software of D-Link USB Radio only can be run under
MS Windows 2000, Windows 98 or Windows 95B(OSR2 which support USB)
For Windows 95B/98/2000
(1). Insert your D-Link USB Radio Utility CD-ROM into the CD drive
(2). Select Start button.
(3). Select Run Command.
(4). Type D:\SETUP (or E:\SETUP)
(5). After you have started up the setup program of the D-Link USB
Radio, just simply follow the instructions displayed on the
screen step by step.
*** WARNING:
1). Before you install D-Link USB Radio, please do make sure you have
installed the right driver for the sound card plugged into
your PC. For example, if you use Windows 98, the driver for
the sound card must be the Windows 98 version. Otherwise, you
cannot make your D-Link USB Radio working properly.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.