1. sgl206a.zip Driver
2. SISTOOLS.TXT File Contents

SISTOOLS.TXT Driver File Contents (sgl206a.zip)

=======================================
SiS190/191 Mass Production Test Program
=======================================


(1) Introduction
================
  lan19x.exe     -- Loopback test program 
  exlb19x.exe    -- Loopback test program 
  ee19x.exe      -- EEPROM programming program 

  Note: ee19x.exe cannot support multiple access through network


(2) Modify EEPROM data file(ee) manually
========================================
  1. Modify current address
     Ex: in EE, line 4, 5, 6
     e000
     0906     ===> 00 E0 06 09 00 01
     0100

     Modify starting address
     Ex: in EE, line 34
     00 E0 06 09 00 01

  2. Modify end address
     Ex: in EE, line 33
     00 E0 06 09 FF FF

(3) Program MAC address:
========================
    ee.exe -- Program MAC address
    Usage   : ee19x <eeprom_file>

    Ex:                              
    c:\>ee19x ee19x.dat


(4) Test result:
================
  1. Pass: All tests are passed.
     ===> This LAN chip is good.

  2. Loopback test fail:
     ===> This LAN chip may not be good.


(5) Other Usage:
================

Change Notes :  -----------------------------------------------------------

                1) Lan19x.exe -- ask user to specify LoopCount and Limit.

                   Usage : lan19x <loopcount> <limit> 

                   <loopcount> : The number of loop will be test.
                   <limit>     : If the number of tset failed exceed limit number will stop the test.


                2) exlb19x.exe    -- loopback test with different user interface
                               -- exlb needs a font file : modern.fon         
                   Usage : exlb19x <loopcount> <limit> 

                   <loopcount> : The number of loop will be test.
                   <limit>     : If the number of tset failed exceed limit number will stop the test.

                
                3) ee19x.exe      -- add the function that not to advance to
                                  next MAC address and output log file

                   Usage   : ee19x <eeprom_file> [/Options] 
                   Options : /f --> fixed MAC address
                             /l --> output log file
                             /r --> restart system after programming MAC address

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.