Readme.txt Driver File Contents (lan.zip)

***************************************************************************
*                                                                         *
*            SURECOM EP-320X-S 100/10M Ethernet PCI Adapter               *
*                                                                         *
*                   Readme file for Drivers/Utilities                     *
*                                                                         *
*                      Version 1.2,     MAY. 2001                         *
*                                                                         *
***************************************************************************

This README.TXT file includes the following three topics :

1.Driver support Network Operation System and Diskette PATH listing
  (1) NetWork Operation System support
  (2) Driver diskettes Directory PATH listing
2.Wake On LAN (WOL) function statements
3.User guide for drivers installation

======================================================================
1. Driver support Network Operation System and Diskette PATH listing

   (1)  NetWork Operation System support
          |
          +---NDIS2
          |   +---LAN Server 4.0    ( For DOS / OS2 )
          |   +---LANTASTIC 6.0
          |   +---Microsoft Network Client 3.0 for DOS
          |   +---MS LAN Manager    ( For DOS / OS2 )
          |   +---SUN PC-NFS
          |   +---Windows for Workgroups 3.1/3.11
          |
          +---NOVELL NETWARE
          |   +---Client 32  for DOS/WINDOWS 3.X
          |   +---Client for DOS
          |   +---Server
          |        +--- 3.12
          |        +--- 4.1X
          |        +--- 5.0
          +---Packet Driver
          +---LINUX
          +---FreeBSD
          +---SCO-UNIX 5.0
          +---Windows 95 / 98 / Millennium / 2000
          +---Windows NT
                   +--- 3.51
                   +--- 4.0

   (2) Driver diskettes Directory PATH listing

       A:\
         | README.TXT     ;This file.
         | SETUP.EXE      ;Hardware configuration and diagnostics ultility.
         | OEMSETUP.INF   ;Installation information file for Windows NT4.0
         | FEAND4.SYS     ;NDIS4 driver for Windows NT 4.0
         | 
         +---MSLANMAN.DOS           ; MS LAN Manager 2.x for DOS
         |   +---DRIVERS
         |       +---ETHERNET
         |       |   +---FEAND
         |       +---NIF
         +---MSLANMAN.OS2           ; MS LAN Manager 2.x for OS2
         |   +---DRIVERS
         |       +---ETHERNET
         |       |   +---FEAND
         |       +---NIF
         |
         +---NDIS2                  ; NDIS2 driver directory
         |   +---DOS                ; Driver installation guide for
         |   +---OS2                ; LANTASTIC 6.0, MS-CLIENT 3.0, PCNFS,
         |                          ; Windows for Workgroups 3.1,
         |                          ; LAN Server 4.0 for DOS/OS2
         |
         +---NETWARE                ; NOVELL Netware driver
         |   +---CLIENT32           ; Client 32 for DOS/WIN3.1
         |   +---DOSODI             ; DOS Client ODI
         |   +---SERVER             ; NetWare 3.12/ 4.x / 5.0
         |       +----3.12          
         |       +----4.X           
         |
         +---PKTDRV                 ; Packet Driver
         +---LINUX
         +---FreeBSD                ; FreeBSD 2.2/3.0 
         +---SCO5                   ; SCO UNIX 5.X
         +---NT351                  ; Windows NT 3.51
         +---NT40                   ; Windows NT 4.0
         +---WIN2000                ; Windows 2000
         +---WIN95a                 ; Windows 95
         +---WIN95b                 ; Windows 95(OSR2)
         +---WIN98                  ; Windows 98
         +---WINME                  ; Windows Millennium


2.Wake On LAN (WOL) function statements

   (1) Overview

       The Wake on LAN function allows user to remotely wake up a sleeping or
       powered of PC on a network by sending a specific packet of information,
       called a Magic Packet frame, to a node on the network. When a PC capable
       of receiving the specific frame goes to sleep, it will enable the Magic
       Packet mode in the LAN controlle , and when the LAN controller receives
       a Magic Packet frame, it will alert the system to wake up.

   (2) System Requirements

       1> Any kind of motherboard with Wake On LAN function support.

       2> ATX Power Supply

       3> This SURECOM EP-320X-S 100/10M Ethernet PCI Adapter or any one which supported
          Wake On LAN function which is accomplished by Magic Packet technology.

   (3) Configuration Tips

       1> Connect Wake On LAN cable (optional) to SURECOM EP-320X-S 100/10M Ethernet PCI 
          Adapter and your Mother Board's Wake On Lan connector. 

          Note: If you have Motherboard with PCI 2.2 specification supported, you don't
                have to connect this Wake on LAN cable to SURECOM EP-320X-S 100/10M Ethernet
                PCI Adapter and your Mother Board's Wake On Lan connector. 
       2> Make sure Power Management item in BIOS is Enable
       3> If Windows Environments used, check Control Panel-> Power
          Management-> Power Schemes, the Power Schemes CANNOT be "Always On"

   (4) Testing Method

       To perform Wake on LAN test, please prepare two PCs with 
       SURECOM EP-320X-S 100/10M Ethernet PCI Adapter pluged in.  
       Of course, two of the PCs should have WOL function and ATX power supported.
       And please check these two PCs are connected by 
       SURECOM EP-320X-S 100/10M Ethernet PCI Adapter via a hub ( switch ) or a cross over UTP
       cable.

       1> Connect WOL cable to SURECOM EP-320X-S 100/10M Ethernet PCI Adapter 
          and motherboard.
          Note : 
               If the motherboard support both PCI 2.1 and PCI 2.2 spec. , 
               you can choose not to connect WOL cable to both ends. 
       2> Power on these two PC into pure MS-DOS. 
       3> Please find and execute SETUP.EXE from the driver diskette of 
          SURECOM EP-320X-S 100/10M Ethernet PCI Adapter, and then select 
          "Show Configuration", then you will see the card information on the 
          screen, record the Ethernet Address.
          Note :
                If you want to copy SETUP.EXE to harddisk, please copy A:\Modern.fon
                to the same location of SETUP.EXE.
       4> Power down one PC, which is going to be run WOL test.
       5> Please find and execute SETUP.EXE from the driver diskette of 
          SURECOM EP-320X-S 100/10M Ethernet PCI Adapter, and then select "Utility" -> 
          "Transmit  Magic Pkts"  then Input the destination address, which means 
          the Ethernet  address of the SURECOM EP-320X-S 100/10M Ethernet PCI Adapter of 
          the power down PC , with continous 12 Hexadecimal number, for example,
          00002100123A , and then press <Enter> .
       6> The power down PC will be waken up and power on.


3. User guide for drivers installation

   Please  refer  to  the  text  files (*.TXT) in each driver subdirectory.

------------------------------ End of Readme.txt ---------------------------
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.57