1. 23dlxc_e.exe Driver
2. mstmon_b.ini File Contents

mstmon_b.ini Driver File Contents (23dlxc_e.exe)

[Misc]
; PJL capabilities- 1=WarningList, 2=config, 3=ustatus (Job, Page, Dtimed, Ddevice), 5=dstatus (Minolta-Specific Errors / Warnings, consumable items consumption rate)
PJLcapabilities=1,2,3,5
;use small dialog (MAINSMALL) or large (MAIN)
MainDlg=MAIN
;Name of bitmap in BMP resource DLL used to size images
DLLBitmapSize=IDB_CSDB01
;name of bitmap resource file
ResourceDll=mstmon_b.dll
;used to find help file
HelpFileName=mstmon_b.HLP
;used to find the correct printer - must match zeno.inf
DriverName=magicolor 2300 DL
DriverID=magicolor
;for the title of the status display
StatusTitle=magicolor 2300 DL Status Display
;title for the about box
AboutTitle=About magicolor 2300 DL Status Display
;set DSTATUS TIMED (5-300 seconds)
UstatusDtimed=15
;timeout for DSTATUS TIMED
UstatusTimeOut=35
JobFlag=0
ResetPrintJobInfo=111112,600300
UserDefineConsumptionPercentage=10
;OK for the about box
AboutOK=OK


[Status_Override]
STATUS_PRINTING=610100

[BmpOptions]
;this controls which bmps to use for installed options
;0 = not included, 1 = must include, 2 = must exclude
DEFAULT=1,1,0,1,0,1
INTRAY2=1,0,1,1,0,1
DUPLEX=1,1,0,0,1,1


[BMPNames]
;if you change bitmap #1, change DLLBitmapSize=IDB_CSDB01 in Misc section
1=csdb01
2=csdb02
3=csdb03
4=csdb04
5=csdb05
6=csdb06
7=csdb07
8=csdb08
9=csdb09
10=csdb10
11=csdb11
12=csdb12
13=csdb13
14=csdb14
15=csdd01
16=csdd02
17=csdd03
18=csdd04
19=csdd05
20=csdd06
21=csdd07
22=csdd08
23=csdd09
24=csdd10
25=csdd11
26=csdd12
30=csdm01
31=csdm02
32=csdm03
33=csdm04
34=csdm05
35=csdm06
36=csdm07
37=csdm08
38=csdm09
39=csdm10
40=csdm11
41=csdm12
42=csdm13
43=csdm14
44=csdm15
45=csdm16
46=csdm17
47=csdm18
48=csdm19
49=csdm20
50=csdm21
51=csdm22
52=csdm23
53=csdt01
54=csdt02
55=csdt03
56=csdt04
57=csdt05
58=csdt06
59=csdt07
60=csdt08
61=csdt09
62=csdt10
63=csdt11
64=csdt12
65=csdt13
66=csdt14
67=csdt15
68=csdt16
69=csdt17
70=csdt18
71=csdt19
72=csdb15
73=csdm24
74=csdt20

300=    UNKNOWN;

;************************************************************************
;Codes to BMPS 6001
;Main fig1 -> W/O Tray 2 -> W/Tray 2 -> W/O Duplex -> W/Duplex -> Back fig1  
[CodesToBmps]
100000=33,57,56,19,18,2  ;Fatal Error main motor
100101=33,57,56,19,18,2  ;Fatal Error fuser warm up
100102=33,57,56,19,18,2  ;Fatal Error fuser temperature low
100103=33,57,56,19,18,2  ;Fatal Error fuser overheat
100104=33,57,56,19,18,2  ;Fatal Error fuser themistor malfunction
100200=33,57,56,19,18,2  ;Fatal Error polygonal mirror motor
100210=33,57,56,19,18,2  ;Fatal Error CPU
100300=33,57,56,19,18,2  ;Fatal Error fuser fan
100400=33,57,56,19,18,2  ;Fatal Error HSYNC abnormal
100500=33,57,56,19,18,2  ;Fatal Error P/H fan
110100=33,57,56,19,18,2  ;Fatal Error Engine I/F
110110=33,57,56,19,18,2  ;Fatal Error ROM                       
110120=33,57,56,19,18,2  ;Fatal Error SRDM
110130=33,57,56,19,18,2  ;Fatal Error DRDM
110200=33,57,56,19,18,2	 ;Fatal Error I/O 
111110=51,57,56,19,18,2  ;Connecting
111111=50,70,71,25,26,13 ;Power OFF/Communication Error/Wrong Printer
111112=50,70,71,25,16,13 ;Fatal Print Spooler Error 

200100=34,58,59,20,21,3  ;Printer Cover Open
200200=34,58,59,20,21,3  ;Duplex Cover Open 
200300=73,74,74,24,16,72 ;Tray 2 Side Cover Open
200500=34,58,59,20,21,3  ;Eject-option cover open
210101=35,60,54,22,16,2  ;Paper jam at Tray 1 
210102=30,61,61,22,16,4  ;Paper jam at Tray 2 
210400=36,60,54,22,16,2	 ;Paper Jam at Transfer Roller
210401=36,60,54,22,16,2  ;Paper exists at Transfer Roller after jam occurs
210500=30,60,54,23,23,5  ;Paper jam onduplex lower
210600=37,60,54,22,16,2  ;Paper Jam in Fuser
210800=30,60,54,23,23,5  ;Paper jam in duplex uppere
210900=38,60,54,22,16,2  ;Paper jam in Ejection section
230102=30,56,56,24,16,6  ;Tray 2 Drawer Open
260100=30,53,54,15,16,1  ;Duplex not available
260102=30,53,54,15,16,1  ;No Tray 2 install
260300=30,60,54,23,23,5  ;Size Mismatch for Duplex
260301=30,60,54,23,23,5  ;Media Type Mismatch for Duplex


300101=48,66,67,22,16,12 ;Black Toner Low
300102=47,66,67,22,16,12 ;Yellow Toner Low
300103=46,66,67,22,16,12 ;Magenta Toner Low
300104=45,66,67,22,16,12 ;Cyan Toner Low	
300201=41,66,67,22,16,8  ;Drum life is almost ending 
300300=50,70,71,25,16,13 ;I/O error network
300302=30,68,68,24,16,6  ;Tary 2 low
310100=33,57,56,19,18,2	 ;Memory Overflow
310200=33,57,56,19,18,2	 ;Video Under Run 

400000=31,62,54,24,16,6  ;Paper size error
400104=39,63,63,22,16,7  ;Out of paper in all trays
400201=43,69,69,24,16,11 ;Tray 2 is not inserted firmly
400301=34,58,59,20,21,3  ;Printer cover open
400601=50,70,71,25,16,13 ;Printer power off or communication error                   
400800=48,66,67,22,16,12 ;Black Toner Empty
400801=47,66,67,22,16,12 ;Yellow Toner Empty
400802=46,66,67,22,16,12 ;Magenta Toner Empty
400803=45,66,67,22,16,12 ;Cyan Toner Empty
400804=41,66,67,22,16,8  ;Drum Cartridge End of Life
400900=48,66,67,22,16,12 ;Put black toner cartridge
400901=47,66,67,22,16,12 ;Put yellow toner cartridge
400902=46,66,67,22,16,12 ;Put magenta toner cartridge
400903=45,66,67,22,16,12 ;Put cyan toner cartridge
401001=41,66,67,22,16,8  ;Put drum 
401002=41,66,67,22,16,8  ;Drum Near End 
401103=40,64,65,22,16,8  ;Waster toner box is not attached.
401104=40,64,65,22,16,8  ;Waste Toner Box Full
401105=41,66,67,22,16,8  ;Drum is not attached

410001=44,62,54,24,16,6  ;Put Paper on Tray 1 
410401=44,62,54,24,16,6  ;Put paper on Tray 1  
410501=44,62,54,24,16,6	 ;Put paper on Tray 1  
410601=44,62,54,24,16,6  ;Put paper on Tray 1  
410701=44,62,54,24,16,6  ;Put paper on Tray 1  
410801=44,62,54,24,16,6  ;Put paper on Tray 1  
410901=44,62,54,24,16,6  ;Put paper on Tray 1  
411001=44,62,54,24,16,6  ;Put paper on Tray 1  
411101=44,62,54,24,16,6  ;Put paper on Tray 1  
411201=44,62,54,24,16,6  ;Put paper on Tray 1  
411301=44,62,54,24,16,6  ;Put paper on Tray 1  
411401=44,62,54,24,16,6  ;Put paper on Tray 1  
411501=44,62,54,24,16,6  ;Put paper on Tray 1  
411601=44,62,54,24,16,6  ;Put paper on Tray 1  
411801=44,62,54,24,16,6  ;Put paper on Tray 1  
411901=44,62,54,24,16,6  ;Put paper on Tray 1  
412101=44,62,54,24,16,6  ;Put paper on Tray 1  
412801=44,62,54,24,16,6  ;Put paper on Tray 1  
412901=44,62,54,24,16,6  ;Put paper on Tray 1  
413001=44,62,54,24,16,6  ;Put paper on Tray 1  
413101=44,62,54,24,16,6  ;Put paper on Tray 1  
413201=44,62,54,24,16,6  ;Put paper on Tray 1  
413301=44,62,54,24,16,6  ;Put paper on Tray 1  
413401=44,62,54,24,16,6  ;Put paper on Tray 1  

410402=30,68,68,24,16,6   ;Put paper in Tray 2 
410702=30,68,68,24,16,6   ;Put paper in Tray 2 


420101=44,62,54,24,16,6  ;Put Plain paper on Tray 1 
420201=44,62,54,24,16,6  ;Put Transparency paper on Tray 1 
420301=44,62,54,24,16,6  ;Put Thick Paper on Tray 1 
420501=44,62,54,24,16,6  ;Put Envelope on Tray 1 
420601=44,62,54,24,16,6  ;Put Letterhead on Tray 1 
420801=44,62,54,24,16,6  ;Put Post Card on Tray 1 
420901=44,62,54,24,16,6  ;Put Label on Tray 1 

420102=30,68,68,24,16,6  ;Put Plain paper on Tray 2


500301=41,66,67,22,16,8  ;Drum unit is reaching out of life

600000=52,62,54,24,16,14 ;Wait Action (reset mode)
600100=30,53,54,15,16,1  ;Printer Idel
610100=31,53,54,15,16,1	 ;Printing
610300=32,55,56,17,18,1  ;Warming Up
600200=31,53,54,15,16,1	 ;Canceling Job
600300=32,55,56,17,18,1  ;Energy Save
600101=33,57,56,19,18,2  ;Fatal error toner black
600201=33,57,56,19,18,2  ;Fatal error toner motor
600301=33,57,56,19,18,2  ;Fatal error main motor
600401=33,57,56,19,18,2  ;Fatal error transfer belt
600501=33,57,56,19,18,2  ;Fatal error transfer roller
600601=33,57,56,19,18,2  ;Fatal error SRAM 
600701=33,57,56,19,18,2  ;Fatal error DRAM 
600801=33,57,56,19,18,2  ;Fatal error ROM  
600901=33,57,56,19,18,2  ;Fatal Error AIDC Sensor
600111=33,57,56,19,18,2  ;Fatal Error Controller Internal Error
600112=33,57,56,19,18,2  ;Fatal Error Service man call
601001=33,57,56,19,18,2  ;Fatal Error Controller Internal Error
609904=33,57,56,19,18,2  ;Fatal Error Service man call
609905=33,57,56,19,18,2  ;Fatal Error Service man call
609908=33,57,56,19,18,2  ;Fatal Error Service man call
609911=33,57,56,19,18,2  ;Fatal Error Service man call
609912=33,57,56,19,18,2  ;Fatal Error Service man call
609914=33,57,56,19,18,2  ;Fatal Error Service man call
609916=33,57,56,19,18,2  ;Fatal Error Service man call
609918=33,57,56,19,18,2  ;Fatal Error Service man call
609920=33,57,56,19,18,2  ;Fatal Error Service man call
609921=33,57,56,19,18,2  ;Fatal Error Service man call
609922=33,57,56,19,18,2  ;Fatal Error Service man call
609923=33,57,56,19,18,2  ;Fatal Error Service man call
609924=33,57,56,19,18,2  ;Fatal Error Service man call
609925=33,57,56,19,18,2  ;Fatal Error Service man call
609926=33,57,56,19,18,2  ;Fatal Error Service man call
609927=33,57,56,19,18,2  ;Fatal Error Service man call
609933=33,57,56,19,18,2  ;Fatal Error Service man call
609941=33,57,56,19,18,2  ;Fatal Error Service man call
609942=33,57,56,19,18,2  ;Fatal Error Service man call
609943=33,57,56,19,18,2  ;Fatal Error Service man call
609944=33,57,56,19,18,2  ;Fatal Error Service man call

99999901=50,70,71,25,16,13	 ;Bi-Directional Printer Communications Disabled
99999902=50,70,71,25,16,13	 ;Printer not attached to local port
99999903=50,70,71,25,16,13	 ;Mismatched Printer
999999=50,70,71,25,26,13	 ;Port busy


[WarningMessages]
300101=Black Toner Low
300102=Yellow Toner Low
300103=Magenta Toner Low
300104=Cyan Toner Low
300302=Tray 2 Low
400101=Tray 1 Empty
400102=Tray 2 Empty
400501=Size Mismatch
401002=Drum Near End
401102=Waste Toner Box Near Full


[ErrorMessages]
100101=1;Fatal Error Fuser Warm up;There is a problem with Fuser. Call Technical Support.
100102=1;Fatal Error Fuser Temperature Low;Fuser temperature low.Call Technical Support.
100103=1;Fatal Error Fuser Overheat;Fuser overheat.Call Technical Support.
100104=1;Fatal Error Fuser Themistor Malfunction;Fuser themistor malfunction.Call Technical Support.
100200=1;Fatal Error Polygonal Mirror Motor;Fuser themistor malfunctio.Call Technical Support.
100210=1;Fatal Error CPU;There is a problem with CPU. Call Technical Support.
100300=1;Fatal Error Fuser Fan;There is a problem withfuser fan.Call Technical Support.
100400=1;Fatal Error HSYNC abnormal;HSYNC abnormal.Call Technical Support.
100500=1;Fatal Error P/H fan;There is a problem with P/H fan.Call Technical Support.
110120=1;SDRAM Error on-board;There is a problem with SDRAM. \n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
110130=1;SDRAM Error DIMM;There is a problem with SDRAM.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
110110=1;ROM Error;There is a problem with ROM.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
110100=1;Fatal Error Engine I/F;There is a problem with Engine Interface.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
110200=1;Parallel Port I/O Error;1. Power off the Printer, then power on the printer.\n2. If Problem persists, refer to the User's Manual or Contact Technical Support.
111110=1;Connecting
111111=1;Power OFF/Communication Error/Wrong Printer;1. Check if printer is turned on.\n2. Check printer power cord.\n3. Check printer cable.\n4. Check that printer is connected to USB or Parallel port.
111112=1;Fatal Print Spooler Error;There is a problem with the Windows Print Spooler.\nThis could be caused by:\n1. Spooler is off-line (reboot)\n2. No printer installed (reinstall)

200100=3;Printer Cover Open;Close the printer cover
200200=3;Duplex Cover Open;Close the duplex cover
200300=3;Tray 2 Side Cover Open;Close the Tray 2 cover
200500=3;Eject-option cover open;Close the Eject-option cover
210101=1;Paper Jam at Tray 1;1. Remove the jammed paper.\n2. Open and close the printer cover.
210102=1;Paper Jam at Tray 2;1. Open the Tray 2.\n2. Remove the jammed paper.\n3. Open and close the printer cover.
210400=1;Paper Jam at Transfer Roller;1. Open the cover.\n2. Take out the jammed paper.\n3. Close the cover.
210401=1;Paper Jam at Transfer Roller;1. Open the cover.\n2. Take out the jammed paper.\n3. Close the cover.
210500=1;Paper Jam at Duplex Lower;1. Open Duplex cover.\n2. Remove jammed paper.\n3. Close Duplex cover.
210600=1;Paper Jam at Fusing Unit Section;1. Open the cover. \n2. Take out the jammed paper. \n3. Close the cover.
210800=1;Paper Jam in Duplex Upper;1. Open Duplex cover.\n2. Remove jammed paper.\n3. Close Duplex cover.
210900=1;Paper Jam in Ejection Section;1. Open the cover. \n2. Remove the jammed paper.\n3. Open and close the printer cover.
230102=3;Tray 2 Drawer Open; Insert cassette in Tray 2
260100=3;No Duplex Unit; Install Duplex Option
260102=3;No Tray 2 Installed;Install Tray 2
260300=3;Size Mismatch for Duplex;Set the correct paper size for duplex.
260301=3;Media Type Mismatch for Duplex; Set the correct media type for duplex

300300=1;NIC Failure;The installed Network Interface Card is not responding.\n1. Power off the Printer, then power on the printer.\n2. If Problem persists, refer to the User's Manual or Contact Technical Support.

300101=1;Toner Low (Black);Change the black toner
300102=1;Toner Low (Yellow);Change the yellow toner
300103=1;Toner Low (Magenta);Change the magenta toner
300104=1;Toner Low (Cyan);Change the cyan toner
300201=1;Drum Life is almost end.;Change the drum unit
300301=3;Tray 2 Paper Low;Add more paper in Tray 2
310100=1;Memory Overflow;1. Power off printer, wait a few seconds. Then power it back on again.\n2. Change to lower resolution.
310200=1;Video Underrun;1. Power off printer, wait a few seconds. Then power it back on again.\n2. Change to lower resolution.

400000=3;Paper Size Error;Put proper paper in the selected tray
400101=1;Paper Empty Tray 1 ;Add paper on Tray 1 
400102=1;Paper Empty Tray 2;Add paper in Tray 2
400104=1;Out of paper in all trays;Add paper in Trays
400201=3;Tray 2 is not inserted firmly;Open cover of Tray 2 and close it
400501=3;Paper Size Error;Put proper paper in the selected tray
400601=1;Printer Power Off / Communication Error / Printer Mismatch;1. Check if printer is turned on.\n2. Check printer power cord.\n3. Check printer cable.\n4. Check that Minolta Color magicolor 2300 DL is connected to collect local port.    
400800=1;Black Toner Empty;Open cover and replace Black Toner Cartridge
400801=1;Yellow Toner Empty;Open cover and replace Yellow Toner Cartridge
400802=1;Magenta Toner Empty;Open cover and replace Magenta Toner Cartridge
400803=1;Cyan Toner Empty;Open cover and replace Cyan Toner Cartridge
400804=1;Drum Catridge End of Life;Open cover and replace Drum Catridge
400900=1;Put Black Toner Cartridge;Open cover and install Black Toner Cartridge
400901=1;Put Yellow Toner Cartridge;Open cover and install Yellow Toner Cartridge
400902=1;Put Magenta Toner Cartridge;Open cover and install Magenta Toner Cartridge
400903=1;Put Cyan Toner Cartridge;Open cover and install Cyan Toner Cartridge
401001=1;Put Drum;Open cover and put Drum Unit
401101=1;Put Waste Toner Box;Open cover and put Waste Toner Box
401102=1;Waste Toner Box Near Full;Open cover and replace Waste Toner Box
401103=1;No Waste Toner Box;Open cover and install Waste Toner Box
401104=1;Waste Toner Box Full;Open cover and replace Waste Toner Box
401105=1;Drum is not attached ;Open cover and install Drum Unit

410001=3;Media size is Custom Paper. It's different between feeding media and the setting by the driver. ;Put Custom Paper on Tray 1.
410401=3;Media size is Letter paper. It's different between feeding media and the setting by the driver.;Put Letter paper media on Tray 1.
410501=3;Media size is Legal paper. It's different between feeding media and the setting by the driver.;Put Legal paper media on Tray 1.
410601=3;Media size is Executive paper. It's different between feeding media and the setting by the driver.;Put Executive paper on Tray 1.
410701=3;Media size is A4 paper. It's different between feeding media and the setting by the driver.;Put A4 paper on Tray 1.
410801=3;Media size is A5 paper. It's different between feeding media and the setting by the driver.;Put A5 paper on Tray 1.
410901=3;Media size is Envelope Monarch. It's different between feeding media and the setting by the driver.;Put Envelope Monarch on Tray 1.
411001=3;Media size is Envelope #10. It's different between feeding media and the setting by the driver.;Put Envelope #10 on Tray 1.
411101=3;Media size is Envelope DL. It's different between feeding media and the setting by the driver.;Put Envelope DL on Tray 1.
411201=3;Media size is Envelope C5. It's different between feeding media and the setting by the driver.;Put Envelope C5 on Tray 1.
411301=3;Media size is B5 (ISO) paper. It's different between feeding media and the setting by the driver.;Put B5 (ISO) paper on Tray 1.
411401=3;Media size is B5 (JIS) paper. It's different between feeding media and the setting by the driver.;Put B5 (JIS) paper on Tray 1.
411501=3;Media size is J-Postcard paper. It's different between feeding media and the setting by the driver.;Put J-Postcard paper on Tray 1.
411601=3;Media size is Statement paper. It's different between feeding media and the setting by the driver.;Put Statement paper on Tray 1.
411801=3;Media size is Envelope C6. It's different between feeding media and the setting by the driver.;Put Envelope C6 on Tray 1.
411901=3;Media size is Folio Paper. It's different between feeding media and the setting by the driver.;Put Folio paper on Tray 1.
412101=3;Media size is Government Legal Paper. It's different between feeding media and the setting by the driver.;Put Government Legal paper on Tray 1.
412801=3;Media size is Kai 16 Paper. It's different between feeding media and the setting by the driver.;Put Kai 16 paper on Tray 1.
412901=3;Media size is Kai 32 Paper. It's different between feeding media and the setting by the driver.;Put Kai 32 paper on Tray 1.
413001=3;Media size is Envelope Chou #3. It's different between feeding media and the setting by the driver.;Put Envelope Chou #3 on Tray 1.
413101=3;Media size is Envelope Chou #4. It's different between feeding media and the setting by the driver.;Put Envelope Chou #4 on Tray 1 .
413201=3;Media size is Letter Plus Paper. It's different between feeding media and the setting by the driver.;Put Letter Plus paper on Tray 1.
413301=3;Media size is UK Quarto Paper. It's different between feeding media and the setting by the driver.;Put UK Quarto paper on Tray 1.
413401=3;Media size is Foolscap Paper. It's different between feeding media and the setting by the driver.;Put Foolscap paper on Tray 1.


410402=3;Media size is Letter paper (Tray 2). It's different between feeding media and the setting by the driver.;Put Letter paper in Tray 2.
410702=3;Media size is A4 paper (Tray 2). It's different between feeding media and the setting by the driver.;Put A4 paper in Tray 2.


420101=3;Incorrect media type on Tray 1 ;Put Plain Paper on Tray 1.
420201=3;Incorrect media type on Tray 1 ;Put Transparency on Tray 1.
420301=3;Incorrect media type on Tray 1 ;Put Thick Stock on Tray 1.
420501=3;Incorrect media type on Tray 1 ;Put Envelope on Tray 1.
420601=3;Incorrect media type on Tray 1 ;Put Letterhead on Tray 1.
420801=3;Incorrect media type on Tray 1 ;Put Postcard on Tray 1.
420901=3;Incorrect media type on Tray 1 ;Put Labels on Tray 1.

420102=3;Put Plain paper on Tray 2;1. Put Plain paper on Tray 2.\n2. Set the Media type as Plain Paper in driver user interface accordingly .


600000=3;Press the ACTION key;Press the ACTION key button on the front panel to continue printing.
600100=2;Printer Idle
600200=2;Canceling Job
600300=2;Energy Saver
610100=2;Printing
610300=2;Warming Up
600101=1;Fatal Error Toner Rack;There is a problem with the Toner Rack. Call Technical Support.
600301=1;Fatal Error Main motor;There is a problem with the Main motor. Call Technical Support.
600401=1;AIDC Sensor Error;Call Technical Support.
600501=1;Fatal Error Transfer Roller;There is a problem with the Transfer Roller. Call Technical Support.
600801=1;Fatal Error ROM;There is a problem with ROM.\n1. Power off the printer, wait for few seconds. Then power it back on again.\n2. Call Technical Support.
600901=1;Fatal Error AIDC Sensor;There is a problem with AIDC Sensor.\n1. Power off the printer, wait for few seconds. Then power it back on again.\n2. Call Technical Support.
600111=1;Fatal Error Controller Internal Error;There is a problem with Controller.\n1. Power off the printer, wait for few seconds. Then power it back on again.\n2. Call Technical Support.
600112=1;Fatal Error Service man call;Call Technical Support.
601001=1;Controller Internal Error;Call Technical Support.

609904=1;Service Call:04H;Call Technical Support.
609905=1;Service Call:05H;Call Technical Support.
609908=1;Service Call:08H;Call Technical Support.
609911=1;Service Call:0BH;Call Technical Support.
609912=1;Service Call:0CH;Call Technical Support.
609914=1;Service Call:0EH;Call Technical Support.
609916=1;Service Call:10H;Call Technical Support.
609918=1;Service Call:12H;Call Technical Support.
609920=1;Service Call:14H;Call Technical Support.
609921=1;Service Call:15H;Call Technical Support.
609922=1;Service Call:16H;Call Technical Support.
609923=1;Service Call:17H;Call Technical Support.
609924=1;Service Call:18H;Call Technical Support.
609925=1;Service Call:19H;Call Technical Support.
609926=1;Service Call:1AH;Call Technical Support.
609927=1;Service Call:1BH;Call Technical Support.
609933=1;Service Call:21H;Call Technical Support.
609941=1;Service Call:29H;Call Technical Support.
609942=1;Service Call:2AH;Call Technical Support.
609943=1;Service Call:2BH;Call Technical Support.
609944=1;Service Call:2CH;Call Technical Support.

99999901=1;Bi-Directional Printer Communications Disabled;Status Monitor requires Bi-Directional Printer Communication to be enabled
99999902=1;Printer not attached to local port;Non LPT/USB port connections are not supported by this status monitor.\nIf the printer is networked, please use the HTML status page.
99999903=1;Mismatched Printer;This printer status monitor will only work with Minolta Color magicolor 2300 DL.
999999=1;Port busy;Printer is busy for another port.


[PopUpCfg]
Focus=1

[InactivePopups]
111110=1
600300=1
600100=1
610300=1
999999=0