LG GoldStream LPNC10/100-32
Driver Diskette (Ver 1.20) Overview
TOPIC
========================================
1. DISKETTE CONTENTS
2. ENABLER
3. DIAGNOSTIC PROGRAM
4. NETWARE DOS ODI DRIVER
5. PACKET DRIVER
6. NDIS2 DRIVER FOR ARTISOFT LANTASTIC V6.0
7. NDIS2 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
8. NDIS2 DRIVER FOR LAN MANAGER V2.1
9. NDIS4 DRIVER FOR WINDOWS 95
10. NDIS4 DRIVER FOR WINDOWS 98
11. NDIS4 DRIVER FOR WINDOWS NT 4.0
12. NDIS5 DRIVER FOR WINDOWS 2000
13. LINUX DRIVER
[1] DISKETTE CONTENTS
Files and
Subdirectories Contents
--------------------------------------------------------------------
\README.TXT This file
\CBRSET.EXE DOS Mode Setup And Diagnostic Program
\RTPCI.EXE DOS Mode CardBus Enabler
\RTBIOS.COM DOS Mode CardBus BIOS Enhancer (for DOS command line)
\RTBIOS.SYS DOS Mode CardBus BIOS Enhancer (for DOS device driver)
\CARDGO.BAT PCMCIA Client Batch File
\LPNC100.INF Setup file for Windows 95 / 98
\LPNC100.SYS NDIS driver for Windows 95 / 98
\WFW311 Directory of NDIS V2.0 Enhance Mode Driver for WFW311
\MSLANMAN.DOS Directory of NDIS V2.0 Driver for Lan Manager V2.1
\NDIS2 Directory of NDIS V2.0 Driver
\NETWARE.ODI Directory of Novell Netware DOS ODI Driver
\PKTDRV Directory of FTP Compliant Packet Driver Directory
\LANTASTI.V60 Directory of NDIS V2.0 Driver for Lantastic V6.0
\WIN2000 Directory of NDIS5 Driver for Windows 20000
\WINDIAG\NT4 Directory of Diagnostic Program for Windows NT 4.0
\WINDIAG\WIN9X Directory of Diagnostic Program for Windows 9x
\WINNT40 Directory of NDIS V3.1 Driver for Windows NT 4.0
[2] ENABLER (For DOS and Windows 3.1 Only)
The enabler is a CardBus controller enable program. This enable
program only need for DOS and Windows 3.x system. It does not require
the Card & Socket Services driver to be loaded.
To load the enabler properly, check your system file config.sys.
Add this line
"device=c:\DOS\himem.sys"
In order to work well with emm386, remove the argument "NOEMS" as
"device=c:\dos\emm386"
or edit it as
"device=c:\dos\emm386 x=d000-d3ff"
or remark it as
"rem device=c:\dos\emm386"
To load the enabler program, type
CARDGO [/iXX][/mXXXX][/?]
in DOS command line, or
DEVICE=[PATHNAME]RTPCI.EXE [/iXX][/mXXXX]
DEVICE=[PATHNAME]RTBIOS.SYS
in config.sys file.
where:
[/iXX] This specifies the hardware interrupt (IRQ) where your
card will be indicated.
The valid IRQs are 0-15.
[/pXXXX] This specifies the IO Base address. The valid
MEMs are 1000-FF80.
[/?] This specifies to indicate the program to display all
the possible syntax only.
If no any parameters given, enabler will find an available setting
automatically.
[3] DIAGNOSTIC PROGRAM
CBRSET.EXE is running on DOS environment. It is a complete setup and
diagnostic program that users can make sure if the card is good or not.
[Note] Before execute CBRSET.EXE, you must make sure the enabler
programs, rtpci.exe and rtbios.com, are loaded.
There are diagnostic programs running on Windows environment, whcich
are under \WINDIAG subdirectory. To install these diagnostic programs,
please refer to the readme file under the related subdirectory.
[4] NETWARE DOS ODI DRIVER
[INSTALLATION]
1. Follow the section [2] ENABLER to load the enabler program.
2. Make sure that the LG GoldStream LPNC10/100-32 is inserted.
3. Insert the driver diskette in the floppy drive. Choose the directory
"a:\netware.odi".
4. Copy all files to your local directory.
5. Execute STARTNET.bat, and the driver is installed.
[5] PACKET DRIVER
The RTSPKT.COM is the Packet driver.
To load the packet driver , type RTSPKT 0X60.
RTSPKT [options] <packet_int_no> [media_type]
-i -- Force driver to report itself as IEEE 802.3 instead of Ethernet II.
-d -- Delayed initialization. Used for diskless booting
-n -- NetWare conversion. Converts 802.3 packets into 8137 packets
-w -- Windows hack, obsoleted by winpkt
-p -- Promiscuous mode disable
-u -- Uninstall
media_type :: auto = Auto_negotiation
10half = Force 10M/HalfDuplex
10full = Force 10M/FullDuplex
100half = Force 100M/HalfDuplex
100full = Force 100M/FullDuplex
[6] NDIS2 DRIVER FOR ARTISOFT LANTASTIC V6.0
[INSTALLATION]
1. Follow the section [2] ENABLER to install the enabler program
as device drivers.
2. Install Artisoft LANTastic, and sepcify C:\LANTASTI as the
destination directory.
3. When "Select Network Adapter" screen pops up, choose "NDIS support
for Network Adapter".
4. When install program prompts you the "manufacturer's driver disk"
on the "Enter NDIS driver directory" screen, insert the driver disk.
5. Complete the installation, then reboot the computer and start LANTastic.
[7] NDIS2 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
[INSTALLATION]
1. Follow the section [2] ENABLER to install the enabler program.
2. Run Windows by typing WIN from the DOS prompt.
3. Click the "Network" icon in the main Program Group.
4. Click the "Network Setup" icon from the Network window.
5. Select "Drivers" item from the Network Setup dialog box.
6. Select "Add Adapters" item in the option dialog box.
7. Select "Unlisted or Updated Network Adapter" when the
install driver field appears.
8. Type destination drive and path name in your PC.
9. Insert the Driver Diskette in your floppy drive.
10. When the "LG GoldStream LPNC10/100-32" dialog box appears, select
the options step by step.
11. Follow screen instructions to complete the process.
12. Restart your computer.
[8] NDIS2 DRIVER FOR LAN MANAGER V2.1
[INSTALLATION]
1. Follow the section [2] ENABLER to install the enabler program
as device drivers.
2. Type "lmsetup" In LanManager Directory. Press Enter.
3. Choice "Network Drivers..." in " Configuration ". Press Enter.
4. Choice <Add New Configs> ,press Enter.
Network Adapter Driver appears.
5. Choice <Other Driver> , press Enter.
6. Insert the Driver Disk to specified drive (A:\> or B:\>),key in the
specified drive (A:\> or B:\>),then push <OK> button.
7. Select a available Network Adapter Driver,
"LG GoldStream LPNC10/100-32"
Push <OK> button.
8. Press the SPACEBAR to select the protocol what you want.
9. Push <OK> button.
Configuration Complete appear.
10. Push <Save> button.
11. Press "F3" to exit.
12. Press Enter.
[9] NDIS4 DRIVER FOR WINDOWS 95 OSR2 (4.00.950b)
[INSTALLATION]
1. Insert the LG GoldStream LPNC10/100-32 into the CardBus slot. The
system displays the "New Hardware Found" window, with "PCI Ethernet Controller"
as the device name.
2. Insert the Driver Diskette into a: floppy drive, and click "next".
3. Occasinally, the system may ask for files from the Windows 95
distribution CD-ROM. Follow the prompt until the installation is complete.
4. Remove the diskette and restart computer.
[10] NDIS4 DRIVER FOR WINDOWS 98
[INSTALLATION]
1. Make sure that the LG GoldStream LPNC10/100-32 is inserted.
2. In the Add Hardware Device Driver Wizard window, click Next. If this
window does not appear, click System and then click Reflesh.
3. Click the recommanded item and Next.
4. Inster the driver diskette in the floppy drive. Type the directory
"a:\" and click OK.
5. In the copying files window, type "a:\" and click OK.
6. If prompted, supply the Windows 98 CD-ROM or type the directory
path to the Windows 98 files on your PC and click OK.
7. In the Update Device Driver Wizard, click Finish.
8. Remove the drive diskette and restart computer.
[11] NDIS4 DRIVER FOR WINDOWS NT 4.0
[INSTALLATION]
1. Make sure that the LG GoldStream LPNC10/100-32 is inserted.
2. Using Control Panel, double-click Network.
3. Select the Adapter tab and click Add.
4. Select Have Disk.
5. Insert the driver diskette in the floppy drive. Choose the directory
"a:\winnt4" and click OK.
6. Select "LG GoldStream LPNC10/100-32" and click OK.
7. Select proper resources allocations and click OK.
8. Click close.
9. Click YES to reboot your computer.
[12] NDIS5 DRIVER FOR WINDOWS 2000
[INSTALLATION]
1. Insert LG GoldStream LPNC10/100-32 and the Found New Hardware Wizard
window will appear.
2. In the Found New Hardware Wizard window, click Next. If this window
does not appear, click System and then click Reflesh.
3. Click the default "Search for a suitable driver for my device
(recommended)" and click Next.
4. Select Specify a location and click Next.
5. Inster the OEM diskette in the floppy drive. Type or browse the
directory "a:\win2000" and click OK.
6. Click Next.
7. In the Digital Signature Not Found window, click Yes.
8. Click Finish.
[13] LINUX DRIVER
Tested Platforms
----------------
This device driver has been fully tested on the following platforms:
Slackware 3.6
Slackware 4.0
Slackware 7.0
Redhat 5.2
Redhat 6.0
For Readhat 5.2, pcmcia-cs-3.0.9.tgz is recommended.
File List
---------
The complete file list is as follows:
README
makefile
rtl8139.c
en0100r.o
Before Installation
-------------------
Before you start rebuilding the driver, you must have PCMCIA binaries and
source installed in your system. PCMCIA module version 3.0.9 or
later are quaranteed to work well with this driver.
Latest version of PCMCIA module is available at ftp://sourceforge.com.
Also, if you have just rebuilt your kernel, you must first rebuild PCMCIA
then the device driver to avoid any inconsistency.
When you are rebuilding PCMCIA modules, be sure you select the following
item:
(1) Read from the currently running kernel.
Otherwise, you might encounter some problems with when module
version is set.
Install Driver
--------------
1. To login as the root.
2. To copy the driver code from the Installation diskette, simply do
> mcopy a:/Linux/lg-en0100-r-v1.0.tgz
> gzip -cd lg-en0100-r-v1.0.tgz | tar xvf -
> cd lg-en0100-r-v1.0
3. To generate the driver
Modify the PCMCIASRC variable in your makefile to the location of your
PCMCIA source.
Modify the KERN_VER variable in your makefile.
After you finish the modification of variables in your makefile, you can
rebuild the driver by doing
> make
4. To install the driver
> make install
5. To configure the LG GoldStream LPNC10/100-32
> cd /etc/pcmcia
5.1 To add the following text into the "config" file (The mode of the "config"
file must be the "write" mode.)
> vi config
device "lg_cb"
class "network" module "cb_enabler", "lg_cb"
card "LG GoldStream LPNC10/100-32 "
version "LG", "GoldStream LPNC10/100-32"
bind "lg_cb"
or
card "LG GoldStream LPNC10/100-32 "
manfid 0x018A, 0x0106
bind "lg_cb"
5.2 To configure the PCMCIA NIC interface
> vi network.opts
6. To reboot the Linux
> shutdown -r now
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.