THBDADriverNote.txt Driver File Contents (BDADriverV1.2.3.8_WHQL.zip)

; --------------------------------------------------------------
; Registry setting note
; --------------------------------------------------------------

Note:The following registry keys can be set by ThBDAConsole.exe as well.


1. For previous MCE2005 setting (DVB-T only),
   If MCE2005 Emerald Rollup-2 is installed, then ignore these options.

    a. "MCE_FreqTranslate" :Set for MCE support 
       0:No freq translation, as it is.
       1:Translate the MCE frequency to 6/7/8 freq list

     b. "FixedBandwidth":
     
       0: Normal, as it is set by application
       1: VHF 7MHz , UHF  8MHz 
       6: Fix bandwith as 6MHz 
       7: Fix bandwith as 7MHz 
       8: Fix bandwith as 8MHz 
                                    
    c. "ShiftFreqScan": Skip scan shift frequency (+-167).
        0: Normal, as it is set by application.
        1: Disable off center-frequncy scan (+-167KHz)
 
2. Satellite card setting (DVB-S only)
    a. "DiSEqC" : DiSEqC Selection
        0: None
        1: DiSEqC A
        2: DiSEqC B
        3: DiSEqC C
        4: DiSEqC D
    
    b. "LNBPower" : LNB Power
        0: OFF
        1: ON
    
    c. "Tone" : Tone setting
        0: ON/OFF by LNB switch frequency
        1: OFF
        2: ON

3. Misc setting
    a. "RelockMonitor" : This will create thread to check tuner lock status. If
                         the signal is not locked, it will lock again.
        0: Disable
        1: Enable Relock monitor





Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.78