; --------------------------------------------------------------
; Registry setting note
; --------------------------------------------------------------
Note:The following registry keys can be set by ThBDAConsole.exe as well.
1. For previous MCE2005 setting (DVB-T only),
If MCE2005 Emerald Rollup-2 is installed, then ignore these options.
a. "MCE_FreqTranslate" :Set for MCE support
0:No freq translation, as it is.
1:Translate the MCE frequency to 6/7/8 freq list
b. "FixedBandwidth":
0: Normal, as it is set by application
1: VHF 7MHz , UHF 8MHz
6: Fix bandwith as 6MHz
7: Fix bandwith as 7MHz
8: Fix bandwith as 8MHz
c. "ShiftFreqScan": Skip scan shift frequency (+-167).
0: Normal, as it is set by application.
1: Disable off center-frequncy scan (+-167KHz)
2. Satellite card setting (DVB-S only)
a. "DiSEqC" : DiSEqC Selection
0: None
1: DiSEqC A
2: DiSEqC B
3: DiSEqC C
4: DiSEqC D
b. "LNBPower" : LNB Power
0: OFF
1: ON
c. "Tone" : Tone setting
0: ON/OFF by LNB switch frequency
1: OFF
2: ON
3. Misc setting
a. "RelockMonitor" : This will create thread to check tuner lock status. If
the signal is not locked, it will lock again.
0: Disable
1: Enable Relock monitor
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.