================================================================== NOTES ON Installing D-Link DE-220 Family Ethernet Adapter For D-Link's TCP/IP Users ================================================================== (c) 1997 Copyright D-Link Corporation ALL RIGHTS RESERVED This document contains installation notes, which is not included in the DE-220 Family Ethernet Adapter USER'S GUIDE or onscreen instructions, for D-Link's TCP/IP users regarding DE-220 Family Ethernet Adapter installation. ( Please note the "D-Link's TCP/IP" is the TCP/IP program which has been modified by D-Link.) This document contains information on the following topics: 1.0 Introduction 2.0 Installing Packet driver ___________________________________________________________________ 1.0 Introduction ---------------- D-Link's TCP/IP users please also refer to the following: ------------------------------------------------------------------- File Description/Installation notes ------------------------------------------------------------------- \README.TXT For all users \PKTDRV\README.TXT For all Packet driver users 2.0 Installing Packet Driver ------------------------------ There are two methods to run the D-Link's TCP/IP program. METHOD 1: ÄÄÄÄÄÄÄÄÄ In your CONFIG.SYS file, include the DEVICE command. Format: DEVICE = DE22XPD.SYS [/d] [/w] <packet_int_no> <packet_int_no> is the software interrupt vector number used by the packet driver program. This can be from 96 to 128. /d Delay Initial - The driver program will not initialize the network interface card until the packet driver program is accessed by its upper layer program. /w The -w parameter is for use only in the Windows environment. See \PKTDRV\README.TXT for addition parameters METHOD 2: ÄÄÄÄÄÄÄÄÄ 1. In your AUTOEXEC.BAT file, include the following command lines: Format: set HOSTS=<PATH> <PATH> is the directory where the D-Link TCP/IP programs reside. 2. Issue DE22XPD command at the MS-DOS command prompt: Format: DE22XPD [/d] [/w] <packet_int_no> 3. Run TCPSTART.EXE, at the DOS command prompt, to start TCP/IP.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.