OEMSETUP.INF Driver File Contents (LINKSYSEtherPCILANCardII.zip)

;********************************************************************
;
; Linksys LNEPCI II Ethernet Adapter miniport driver oemsetup file
;
;********************************************************************

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
[Options]
    LNEPCI2
[FileConstants]
UtilityInf	= "UTILITY.INF"
ParamInf	= "NCPARAM.INF"
subroutineinf	= "SUBROUTN.INF"
SoftwareType	= "driver"
Exit_Code	= 0
NetEventDLL	= "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL	= "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "LINKSYS"
ProductMajorVersion	= "1"
ProductMinorVersion	= "0"
ProductVersion	= $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "LNEPCI2"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\LNEPCI2.sys"
NetRuleSoftwareType     = "LNEPCI2Sys ndisDriver LNEPCI2Driver"
NetRuleSoftwareUse	= $(SoftwareType)
NetRuleSoftwareBindForm = """LNEPCI2Sys"" yes no container"
NetRuleSoftwareClass    = {"LNEPCI2Driver basic"}
NetRuleSoftwareBindable = {"LNEPCI2Driver LNEPCI2Adapter non exclusive 100"}
ProductHardwareName     = "LNEPCI2"
NetRuleHardwareType     = "LNEPCI2 LNEPCI2Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"LNEPCI2Adapter basic"}
ProductKeyName	= $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName	= $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from	  = ""
to	  = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull 	= ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct	= ""
KeyParameters	= ""
TRUE		= 1
FALSE		= 0
NoTitle 	   = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath	= $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status	   = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media	   = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status	      = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status	       = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option	 = $($1)
    set SrcDir	 = $($2)
    set AddCopy  = $($3)
    set DoCopy	 = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
	else-Ifstr(i) $(!NTN_InstallMode) == Update
			set StartLabel = UpgradeSoftware
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set CommonStatus = STATUS_REBOOT
		set ActivateDetection = TRUE
		set StartLabel = configureadapter
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure the Linksys LNEPCI II Ethernet Adapter driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			set Error = $($R0)
			set from = end
			set to = end
			goto nonfatalinfo
		endif
    else
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
		set ActivateDetection = TRUE
    endif
    Debug-Output "OEMNADN2.INF: =================================================="
    Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "OEMNADN2.INF: Option is: "$(Option)
    Debug-Output "OEMNADN2.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "OEMNADN2.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "OEMNADN2.INF: =================================================="
    Set DetectedCard = FALSE
    Set EtherID = ""
    Ifstr(i) $(ActivateDetection) != TRUE
	Goto skipdetection
    Endif

skipdetection =+
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif
;;Add the Install Help 19/11/97
    Install "Install-Help"

    Ifstr(i) $(DetectedCard) != TRUE
	Goto adaptersetup
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Goto adaptersetup
    Endif
    Set DetectedParams = $($R1)
    Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
;;Add the Install Help 19/11/97
;    Install "Install-Help"
    goto adapteroptions
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "Cannot find component service"
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	Ifstr(i) $(ValueName) == "EtherID"
	    set EtherID = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusType"
	    set BusInterfaceType = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusNumber"
	    set BusNumber = $(ValueData)
	endif
    EndForListDo
adaptersetup =+
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
	Goto adapteroptions
    Endif
    Ifstr(i) $(DetectedCard) == TRUE
	Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
	    Goto adapterverify
	Endif
    Endif
    goto adapteroptions
adapteroptions = +
    set from = adapteroptions
;;Add the Help Files 19/11/97
    sethelpfile "LNEPCI2.HLP" 100 100
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	ifstr(i) $(!AutoNetInterfaceType) != ""
	    set BusInterfaceType = $(!AutoNetInterfaceType)
	else
	    set BusInterfaceType = 1
	endif
	ifstr(i) $(!AutoNetBusNumber) != ""
	    set BusNumber = $(!AutoNetBusNumber)
	else
	    set BusNumber = 0
	endif
	goto adapterverify
    endif
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set EtherID = $(EditTextOut)
		ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
		ui pop 1
    else
		ui pop 1
		Debug-Output "Action: unknown. Bye."
		goto end
    endif
    ifstr(i) $(!STF_NCDETINFO) == {}
	Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error."
	    goto ShellCodeError
	endif
	set BusInterfaceType = $($R1)
	set BusNumber = $($R2)
    else
	set BusInterfaceType = *($(!STF_NCDETINFO),5)
	set BusNumber = *($(!STF_NCDETINFO),6)
    endif
adapterverify =+
    Ifstr(i) $(DetectedCard) != TRUE
	Goto skipoptions
    Endif
    Debug-Output "OEMNADN2.INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	Debug-Output "OEMNADN2.INF: Param_VerifyCard succeeded"
	Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
		goto writeparameters
	endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
		Ifstr(i) $(DoCopy) == "YES"
		    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		    Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto successful
		    Endif
		    Set SrcDir = $($R1)
		Endif
		install "Install-Option"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    goto fatal
		endif
	endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), +
			$(ProductSoftwareName), +
			$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
			$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
			$(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct	   = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add software components"
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
		   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
		   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
		   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
		   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
		   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
		   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Registry error: add value list."
	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)
	goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	Debug-Output "Resgitry error: add value list."
	goto fatalregistry
       endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "Cannot add hardware component"
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Registry error: add hardware component"
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Resgitry error: add value list."
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
    goto writeparameters
writeparameters = +
    set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+
		       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
		       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
		       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
	Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "Registry error: Add value list"
		goto fatalregistry
    endif
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
				$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				goto fatalregistry
		endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL	= ""
   set STF_OVERWRITE	= "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
;;Add the Help Install Process 19/11/97
[Install-Help]
   set STF_VITAL        = ""
   AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
     1 = "LINKSYS LNEPCI II Ethernet Adapter Driver Disk"
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

;;Add the Help Files 4/17/97
[Files-Help]
1,      LNEPCI2.HLP ,     SIZE=999

[Files-Inf]
1,	oemsetup.inf,	 SIZE=50000,	 RENAME=$(!UG_Filename)
[Files-LNEPCI2]
1,LNEPCI2.SYS , SIZE=50000
[LanguagesSupported]
    ENG
[OptionsTextENG]
    LNEPCI2     = "LINKSYS LNEPCI II Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "LINKSYS LNEPCI II Ethernet Adapter Setup"
ProductSoftwareDescription      = "Linksys LNEPCI II Ethernet Adapter Driver"
ProductHardwareLNEPCI2Description        = "LINKSYS LNEPCI II Ethernet Adapter"
ProductSoftwareTitle    = "LINKSYS LNEPCI II Ethernet Adapter Driver"
ProductHardwareLNEPCI2Title      = "LINKSYS LNEPCI II Ethernet Adapter"
ShellCodeErrorTitle	= "Error: "$(FunctionTitle)
ShellCodeErrorText	= "Shell Code Error."
[DialogConstantsENG]
Help	    = "&Help"
Exit	    = "Cancel"
OK	    = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	    = "Cancel"
[FileDependentDlgENG]
Caption        = "Input Ethernet ID"
DlgText        = "Please input adapter's Ethernet ID: "$(!LF)+
		 "For example:"$(!LF)+
		 "        Ethernet ID: 00 01 02 A3 B4 C5"$(!LF)$(!LF)+
		 "(This option is only required when you have more than "+
                 "one Linksys LNEPCI II Ethernet Adapters on this computer. "+
		 "Select SKIP if only one adapter is installed on "+
		 "this computer.)"
Edit1Label  = "&Ethernet ID:"
Continue       = "&OK"
Exit	       = "&Skip"
Help	       = "&Help"
DlgType        = "Edit"
DlgTemplate    = "QUERY_COMPUTER_NAME"
EditTextLim    = 17
EditTextIn     = $(EtherID)
EditFocus      = "ALL"
HelpContext = 100



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.52